logo资料库

HIN232.pdf

发布时间：2023-11-20 发布人：admin 分类：养殖 资料大小：0.62M 资料格式：pdf 举报 版权申诉
第1页 / 共22页
第2页 / 共22页
第3页 / 共22页
第4页 / 共22页
第5页 / 共22页
第6页 / 共22页
第7页 / 共22页
第8页 / 共22页
资料共22页，剩余部分请下载后查看
    ® Data Sheet HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E November 4, 2005 FN4315.16 ±15kV, ESD-Protected, +5V Powered, RS-232 Transmitters/Receivers The HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E family of RS-232 transmitters/receivers interface circuits meet all ElA high-speed RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. A redesigned transmitter circuit improves data rate and slew rate, which makes this suitable for ISDN and high speed modems. The transmitter outputs and receiver inputs are protected to ±15kV ESD (Electrostatic Discharge). They require a single +5V power supply and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The family of devices offers a wide variety of high-speed RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table). The HIN206E, HIN211E and HIN213E feature a low power shutdown mode to conserve energy in battery powered applications. In addition, the HIN213E provides two active receivers in shutdown mode allowing for easy “wakeup” capability. The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V input, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection. Features • Pb-Free Plus Anneal Available (RoHS Compliant) • High Speed ISDN Compatible . . . . . . . . . . . . . 230kbits/s • ESD Protection for RS-232 I/O Pins to ±15kV (IEC61000) • Meets All RS-232E and V.28 Specifications • Requires Only 0.1µF or Greater External Capacitors • Two Receivers Active in Shutdown Mode (HIN213E) • Requires Only Single +5V Power Supply • Onboard Voltage Doubler/Inverter • Low Power Consumption (Typ) . . . . . . . . . . . . . . . . . 5mA • Low Power Shutdown Function (Typ) . . . . . . . . . . . . .1µA • Three-State TTL/CMOS Receiver Outputs • Multiple Drivers - ±10V Output Swing for +5V Input - 300Ω Power-Off Source Impedance - Output Current Limiting - TTL/CMOS Compatible • Multiple Receivers - ±30V Input Voltage Range - 3kΩ to 7kΩ Input Impedance - 0.5V Hysteresis to Improve Noise Rejection Applications • Any System Requiring High-Speed RS-232 Communications Port - Computer - Portable, Mainframe, Laptop - Peripheral - Printers and Terminals - - Modems, ISDN Terminal Adaptors Instrumentation, UPS Selection Table PART NUMBER POWER SUPPLY VOLTAGE NUMBER OF RS-232 DRIVERS NUMBER OF RS-232 RECEIVERS HIN202E HIN206E HIN207E HIN208E HIN211E HIN213E HIN232E +5V +5V +5V +5V +5V +5V +5V 1 2 4 5 4 4 4 2 2 3 3 4 5 5 2 NUMBER OF 0.1µF EXTERNAL CAPACITORS 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors 4 Capacitors LOW POWER SHUTDOWN/TTL THREE-STATE NUMBER OF RECEIVERS ACTIVE IN SHUTDOWN No/No Yes/Yes No/No No/No Yes/Yes Yes/Yes No/No 0 0 0 0 0 2 0 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003-2005. All Rights Reserved. All other trademarks mentioned are the property of their respective owners.
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Ordering Information Ordering Information (Continued) PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # PART NO. HIN202ECB HIN202ECB 0 to 70 16 Ld SOIC (W) M16.3 HIN202ECB-T HIN202ECB 16 Ld SOIC (W) Tape and M16.3 PART NO. HIN206EIAZA-T (Note) PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # HIN206EIAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) Reel HIN207ECA-T HIN207ECA 24 Ld SSOP Tape and M24.209 HIN202ECBZ (Note) 202ECBZ 0 to 70 16 Ld SOIC (W) M16.3 (Pb-free) HIN202ECBZ-T (Note) 202ECBZ 16 Ld SOIC (W) Tape and Reel (Pb-free) M16.3 HIN202ECBN HIN202ECBN 0 to 70 16 Ld SOIC (N) M16.15 HIN202ECBN-T HIN202ECBN 16 Ld SOIC (N) Tape and M16.15 HIN202ECBNZ (Note) HIN202ECBNZ-T (Note) 202ECBNZ 202ECBNZ Reel 0 to 70 16 Ld SOIC (N) M16.15 (Pb-free) 16 Ld SOIC (N) Tape and Reel (Pb-free) M16.15 HIN202ECP HIN202ECP 0 to 70 16 Ld PDIP E16.3 HIN202ECPZ (Note) 202ECPZ 0 to 70 16 Ld PDIP* E16.3 (Pb-free) HIN202EIB HIN202EIB -40 to 85 16 Ld SOIC (W) M16.3 HIN202EIB-T HIN202EIB 16 Ld SOIC (W) Tape and Reel M16.3 Reel HIN207ECAZ (Note) HIN207ECAZ-T (Note) HIN207ECAZ 0 to 70 24 Ld SSOP M24.209 (Pb-free) HIN207ECAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) HIN207ECB HIN207ECB 0 to 70 24 Ld SOIC M24.3 HIN207ECB-T HIN207ECB 24 Ld SOIC Tape and M24.3 Reel HIN207ECBZ (Note) HIN207ECBZ-T (Note) HIN207ECBZ 0 to 70 24 Ld SOIC (Pb-free) HIN207ECBZ 24 Ld SOIC Tape and Reel (Pb-free) M24.3 M24.3 HIN207EIA HIN207EIA -40 to 85 24 Ld SSOP M24.209 HIN207EIAZ (Note) HIN207EIAZ-T (Note) HIN207EIAZ -40 to 85 24 Ld SSOP M24.209 (Pb-free) HIN207EIAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) 202EIBZ -40 to 85 16 Ld SOIC (W) M16.3 HIN207EIB HIN207EIB -40 to 85 24 Ld SOIC (Pb-free) HIN207EIB-T HIN207EIB 24 Ld SOIC Tape and Reel M24.3 M24.3 HIN202EIBZ (Note) HIN202EIBZ-T (Note) HIN202EIBNZ (Note) HIN202EIBNZ-T (Note) HIN206ECBZ (Note) HIN206ECBZ-T (Note) HIN206EIAZ (Note) HIN206EIAZ-T (Note) HIN206EIAZA (Note) 202EIBZ 16 Ld SOIC (W) Tape and Reel (Pb-free) M16.3 HIN202EIBN HIN202EIBN -40 to 85 16 Ld SOIC (N) M16.15 HIN202EIBN-T HIN202EIBN 16 Ld SOIC (N) Tape and M16.15 Reel 202EIBNZ -40 to 85 16 Ld SOIC (N) M16.15 202EIBNZ 16 Ld SOIC (N) Tape and Reel (Pb-free) M16.15 HIN206ECB HIN206ECB 0 to 70 24 Ld SOIC M24.3 HIN206ECB-T HIN206ECB 24 Ld SOIC Tape and M24.3 Reel HIN206ECBZ 0 to 70 24 Ld SOIC M24.3 (Pb-free) HIN206ECBZ 24 Ld SOIC Tape and M24.3 HIN206EIA HIN206EIA -40 to 85 24 Ld SSOP M24.209 HIN206EIAZ -40 to 85 24 Ld SSOP M24.209 (Pb-free) HIN206EIAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) HIN206EIAZ -40 to 85 24 Ld SSOP M24.209 (Pb-free) HIN208ECA-T HIN208ECA 24 Ld SSOP Tape and M24.209 HIN207EIBZ (Note) HIN207EIBZ-T (Note) HIN207EIBZ -40 to 85 24 Ld SOIC M24.3 (Pb-free) HIN207EIBZ 24 Ld SOIC Tape and M24.3 Reel (Pb-free) HIN208ECA HIN208ECA 0 to 70 24 Ld SSOP M24.209 Reel HIN208ECAZ (Note) HIN208ECAZ-T (Note) HIN208ECAZA-T (Note) HIN208ECAZ 0 to 70 24 Ld SSOP M24.209 (Pb-free) HIN208ECAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) HIN208ECAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) HIN208ECB HIN208ECB 0 to 70 24 Ld SOIC M24.3 Reel HIN208ECBZ (Note) HIN208ECBZ-T (Note) HIN208ECBZ 0 to 70 24 Ld SOIC M24.3 (Pb-free) HIN208ECBZ 24 Ld SOIC Tape and M24.3 Reel (Pb-free) HIN208EIA HIN208EIA -40 to 85 24 Ld SSOP M24.209 Reel (Pb-free) HIN208ECB-T HIN208ECB 24 Ld SOIC Tape and M24.3 (Pb-free) HIN208EIA-T HIN208EIA 24 Ld SSOP Tape and Reel M24.209 2 FN4315.16 November 4, 2005
    PART NO. HIN208EIAZ (Note) HIN208EIAZ-T (Note) (Pb-free) HIN208EIAZ 24 Ld SSOP Tape and M24.209 Reel (Pb-free) HIN208EIB HIN208EIB -40 to 85 24 Ld SOIC HIN208EIBZ (Note) HIN208EIBZ -40 to 85 24 Ld SOIC (Pb-free) M24.3 M24.3 (Pb-free) HIN211ECAZ 28 Ld SSOP Tape and M28.209 Reel (Pb-free) HIN211ECB HIN211ECB 0 to 70 28 Ld SOIC HIN211ECBZ 0 to 70 28 Ld SOIC (Pb-free) M28.3 M28.3 HIN211ECAZ (Note) HIN211ECAZ-T (Note) HIN211ECBZ (Note) HIN211ECBZ-T (Note) HIN232ECA-T HIN232ECA 16 Ld SSOP Tape and M16.209 Reel HIN232ECAZ-T (Note) HIN232ECAZ 16 Ld SSOP Tape and M16.209 Reel (Pb-free) HIN232ECB HIN232ECB 0 to 70 16 Ld SOIC (W) M16.3 HIN232ECB-T HIN232ECB 16 Ld SOIC (W) Tape and M16.3 HIN232ECBNZ (Note) 232ECBNZ 0 to 70 16 Ld SOIC (N) M16.15 (Pb-free) HIN232ECBNZ-T (Note) 232ECBNZ 16 Ld SOIC (N) Tape and Reel (Pb-free) M16.15 HIN232ECBZ (Note) 232ECBZ 0 to 70 16 Ld SOIC (W) M16.3 (Pb-free) HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Ordering Information (Continued) Ordering Information (Continued) PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # PART NO. HIN208EIAZ -40 to 85 24 Ld SSOP M24.209 HIN232ECA HIN232ECA 0 to 70 16 Ld SSOP M16.209 HIN211ECA HIN211ECA 0 to 70 28 Ld SSOP M28.209 Reel HIN211ECA-T HIN211ECA 28 Ld SSOP Tape and M28.209 HIN232ECBN HIN232ECBN 0 to 70 16 Ld SOIC (N) M16.15 Reel HIN232ECBN-T HIN232ECBN 16 Ld SOIC (N) Tape and M16.15 HIN211ECAZ 0 to 70 28 Ld SSOP M28.209 Reel HIN211ECBZ 28 Ld SOIC Tape and M28.3 Reel (Pb-free) HIN232ECBZ-T (Note) 232ECBZ 16 Ld SOIC (W) Tape and Reel (Pb-free) M16.3 HIN211EIA HIN211EIA -40 to 85 28 Ld SSOP M28.209 HIN232ECP HIN232ECP 0 to 70 16 Ld PDIP E16.3 HIN211EIA-T HIN211EIA 28 Ld SSOP Tape and Reel M28.209 HIN232ECPZ (Note) HIN232ECPZ 0 to 70 16 Ld PDIP* E16.3 (Pb-free) HIN211EIAZ -40 to 85 28 Ld SSOP M28.209 HIN232EIBN HIN232EIBN -40 to 85 16 Ld SOIC (N) M16.15 HIN211EIAZ (Note) HIN211EIAZ-T (Note) (Pb-free) HIN211EIAZ 28 Ld SSOP Tape and M28.209 Reel (Pb-free) HIN211EIB HIN211EIB -40 to 85 28 Ld SOIC HIN211EIBZ (Note) HIN211EIBZ -40 to 85 28 Ld SOIC (Pb-free) M28.3 M28.3 HIN232EIBN-T HIN232EIBN 16 Ld SOIC (N) Tape and M16.15 Reel HIN232EIBNZ (Note) 232EIBNZ -40 to 85 16 Ld SOIC (N) M16.15 (Pb-free) HIN232EIBNZ-T (Note) 232EIBNZ 16 Ld SOIC (N) Tape and Reel (Pb-free) M16.15 HIN213ECA HIN213ECA 0 to 70 28 Ld SSOP M28.209 HIN232EIV HIN232EIV -40 to 85 16 Ld TSSOP M16.173 HIN213ECA-T HIN213ECA 28 Ld SSOP Tape and M28.209 HIN232EIV-T HIN232EIV Reel 16 Ld TSSOP Tape and Reel M16.173 HIN213ECAZ (Note) HIN213ECAZ-T (Note) HIN213ECAZ 0 to 70 28 Ld SSOP M28.209 (Pb-free) HIN213ECAZ 28 Ld SSOP Tape and M28.209 Reel (Pb-free) HIN232EIVZ (Note) HIN232EIVZ-T (Note) 232EIVZ -40 to 85 16 Ld TSSOP M16.173 (Pb-free) 232EIVZ 16 Ld TSSOP Tape and Reel (Pb-free) M16.173 HIN213EIA HIN213EIA -40 to 85 28 Ld SSOP M28.209 HIN213EIA-T HIN213EIA 28 Ld SSOP Tape and Reel M28.209 HIN213EIAZ (Note) HIN213EIAZ-T (Note) HIN213EIAZ -40 to 85 28 Ld SSOP M28.209 (Pb-free) HIN213EIAZ 28 Ld SSOP Tape and M28.209 Reel (Pb-free) HIN213EIB HIN213EIB -40 to 85 28 Ld SOIC HIN213EIBZ (Note) HIN213EIBZ -40 to 85 28 Ld SOIC (Pb-free) M28.3 M28.3 *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 3 FN4315.16 November 4, 2005
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Pinouts HIN202E (PDIP, SOIC) TOP VIEW C1+ V+ C1- C2+ C2- V- T2OUT R2IN 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC GND T1OUT R1IN R1OUT T1IN T2IN R2OUT HIN206E (SOIC, SSOP) TOP VIEW T3OUT T1OUT T2OUT R1IN R1OUT T2IN T1IN GND VCC C1+ V+ C1- 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 T4OUT R2IN R2OUT SD EN T4IN T3IN R3OUT R3IN V- C2- C2+ + + 1 3 4 5 11 10 12 9 0.1µF 0.1µF T1IN T2IN R1OUT R2OUT +5V 16 VCC +5V TO 10V VOLTAGE INVERTER 2 V+ +10V TO -10V VOLTAGE INVERTER 6 V- C1+ C1- C2+ C2- 0.1µF + 0.1µF + +5V 400kΩ +5V 400kΩ T1 T2 R1 5kΩ 5kΩ R2 GND 15 14 7 13 8 T1OUT T2OUT R1IN R2IN 10 + 12 13 + 14 7 6 18 19 5 22 17 20 0.1µF 0.1µF T1IN T2IN T3IN T4IN R1OUT R2OUT R3OUT EN C1+ C1- C2+ C2- +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 9 VCC +5V TO 10V VOLTAGE DOUBLER 0.1µF + 11 V+ +10V TO -10V VOLTAGE INVERTER 15 V- 0.1µF + T1OUT T2OUT T3OUT T4OUT R1IN R2IN R3IN SD 2 3 1 24 4 23 16 21 5kΩ 5kΩ 5kΩ T1 T2 T3 T4 R1 R2 R3 GND 8 4 FN4315.16 November 4, 2005
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Pinouts (Continued) HIN207E (SOIC, SSOP) TOP VIEW T3OUT T1OUT T2OUT R1IN R1OUT T2IN T1IN GND VCC C1+ V+ C1- 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 T4OUT R2IN R2OUT T5IN T5OUT T4IN T3IN R3OUT R3IN V- C2- C2+ HIN208E (SOIC, SSOP) TOP VIEW T2OUT T1OUT R2IN R2OUT T1IN R1OUT R1IN GND VCC C1+ V+ C1- 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 T3OUT R3IN R3OUT T4IN T4OUT T3IN T2IN R4OUT R4IN V- C2- C2+ C1+ C1- C2+ C2- +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ 10 + 12 13 + 14 7 6 18 19 21 5 22 17 0.1µF 0.1µF T1IN T2IN T3IN T4IN T5IN R1OUT R2OUT R3OUT +5V 9 VCC +5V TO 10V VOLTAGE DOUBLER 0.1µF + 11 V+ +10V TO -10V VOLTAGE INVERTER 15 V- 0.1µF + T1OUT T2OUT T3OUT T4OUT T5OUT R1IN R2IN R3IN 2 3 1 24 20 4 23 16 5kΩ 5kΩ 5kΩ T1 T2 T3 T4 T5 R1 R2 R3 GND 8 5 C1+ C1- C2+ C2- +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ 10 + 12 13 + 14 5 18 19 21 6 4 22 17 0.1µF 0.1µF T1IN T2IN T3IN T4IN R1OUT R2OUT R3OUT R4OUT +5V 9 VCC +5V TO 10V VOLTAGE DOUBLER 0.1µF + 11 V+ +10V TO -10V VOLTAGE INVERTER 15 V- 2 1 24 20 7 3 23 16 T1 T2 T3 T4 R1 R2 R3 R4 GND 8 5kΩ 5kΩ 5kΩ 5kΩ 0.1µF + T1OUT T2OUT T3OUT T4OUT R1IN R2IN R3IN R4IN FN4315.16 November 4, 2005
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Pinouts (Continued) HIN211E (SOIC, SSOP) TOP VIEW HIN213E (SOIC, SSOP) TOP VIEW T3OUT T1OUT T2OUT R2IN R2OUT T2IN T1IN R1OUT R1IN GND VCC C1+ V+ C1- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 T4OUT R3IN R3OUT SD EN R4IN R4OUT T4IN T3IN R5OUT R5IN V- C2- C2+ T3OUT T1OUT T2OUT R2IN R2OUT T2IN T1IN R1OUT R1IN GND VCC C1+ V+ C1- 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 T4OUT R3IN R3OUT SD EN R4IN R4OUT T4IN T3IN R5OUT R5IN V- C2- C2+ NOTE: R4 and R5 active in shutdown. C1+ C1- C2+ C2- +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ 12 + 14 15 + 16 7 6 20 21 8 5 26 22 19 24 0.1µF 0.1µF T1IN T2IN T3IN T4IN R1OUT R2OUT R3OUT R4OUT R5OUT EN +5V 11 VCC +5V TO 10V VOLTAGE DOUBLER 0.1µF + 13 V+ +10V TO -10V VOLTAGE INVERTER 17 V- 0.1µF + T1OUT T2OUT T3OUT T4OUT R1IN R2IN R3IN R4IN R5IN SD 2 3 1 28 9 4 27 23 18 25 T1 T2 T3 T4 R1 R2 R3 R4 R5 GND 10 6 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ C1+ C1- C2+ C2- +5V 400kΩ +5V 400kΩ +5V 400kΩ +5V 400kΩ 12 + 14 15 + 16 7 6 20 21 8 5 26 22 19 24 0.1µF 0.1µF T1IN T2IN T3IN T4IN R1OUT R2OUT R3OUT R4OUT R5OUT EN +5V 11 VCC +5V TO 10V VOLTAGE DOUBLER 0.1µF + 13 V+ +10V TO -10V VOLTAGE INVERTER 17 V- 2 3 1 28 9 4 27 23 18 25 T1 T2 T3 T4 R1 R2 R3 R4 R5 GND 10 5kΩ 5kΩ 5kΩ 5kΩ 5kΩ 0.1µF + T1OUT T2OUT T3OUT T4OUT R1IN R2IN R3IN R4IN R5IN SD FN4315.16 November 4, 2005
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Pinouts (Continued) HIN232E (PDIP, SOIC, SSOP, TSSOP) TOP VIEW C1+ V+ C1- C2+ C2- V- T2OUT R2IN 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC GND T1OUT R1IN R1OUT T1IN T2IN R2OUT + + 1 3 4 5 11 10 12 9 0.1µF 0.1µF T1IN T2IN R1OUT R2OUT +5V 16 VCC +5V TO 10V VOLTAGE INVERTER 2 V+ +10V TO -10V VOLTAGE INVERTER 6 V- C1+ C1- C2+ C2- 0.1µF + 0.1µF + +5V 400kΩ +5V 400kΩ T1 T2 R1 5kΩ 5kΩ R2 GND 15 14 7 13 8 T1OUT T2OUT R1IN R2IN Pin Descriptions PIN VCC V+ V- Power Supply Input 5V ±10%, (5V ±5% HIN207E). Internally generated positive supply (+10V nominal). Internally generated negative supply (-10V nominal). GND Ground Lead. Connect to 0V. FUNCTION C1+ C1- C2+ C2- TIN TOUT RIN ROUT EN, EN SD, SD External capacitor (+ terminal) is connected to this lead. External capacitor (- terminal) is connected to this lead. External capacitor (+ terminal) is connected to this lead. External capacitor (- terminal) is connected to this lead. Transmitter Inputs. These leads accept TTL/CMOS levels. An internal 400kΩ pull-up resistor to VCC is connected to each lead. Transmitter Outputs. These are RS-232 levels (nominally ±10V). Receiver Inputs. These inputs accept RS-232 input levels. An internal 5kΩ pull-down resistor to GND is connected to each input. Receiver Outputs. These are TTL/CMOS levels. Receiver Enable Input. With EN = 5V (HIN213E EN=0V), the receiver outputs are placed in a high impedance state. Shutdown Input. With SD = 5V (HIN213E SD = 0V), the charge pump is disabled, the receiver outputs are in a high impedance state (except R4 and R5 of HIN213E) and the transmitters are shut off. NC No Connect. No connections are made to these leads. 7 FN4315.16 November 4, 2005
    HIN202E, HIN206E, HIN207E, HIN208E, HIN211E, HIN213E, HIN232E Absolute Maximum Ratings VCC to Ground. . . . . . . . . . . . . . . . . . . . . . (GND -0.3V) < VCC < 6V V+ to Ground . . . . . . . . . . . . . . . . . . . . . . . .(VCC -0.3V) < V+ < 12V V- to Ground . . . . . . . . . . . . . . . . . . . . . . .-12V < V- < (GND +0.3V) Input Voltages TIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V < VIN < (V+ +0.3V) RIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30V Output Voltages TOUT . . . . . . . . . . . . . . . . . . . .(V- -0.3V) < VTXOUT < (V+ +0.3V) ROUT . . . . . . . . . . . . . . . . . (GND -0.3V) < VRXOUT < (V+ +0.3V) Short Circuit Duration TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous ROUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous ESD Classification . . . . . . . . . . . . . . . . . . . . See Specification Table Operating Conditions Temperature Range HIN2XXECX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C HIN2XXEIX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to 85°C Thermal Information Thermal Resistance (Typical, Note 1) θJA (°C/W) 16 Ld SOIC (N) Package . . . . . . . . . . . . . . . . . . . . . 16 Ld SOIC (W) Package. . . . . . . . . . . . . . . . . . . . . 16 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . . 16 Ld TSSOP Package . . . . . . . . . . . . . . . . . . . . . . 16 Ld PDIP Package* . . . . . . . . . . . . . . . . . . . . . . . 24 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . 24 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . . 28 Ld SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . 28 Ld SSOP Package . . . . . . . . . . . . . . . . . . . . . . . 110 100 155 145 90 75 135 70 100 Maximum Junction Temperature (Plastic Package) . . . . . . . . 150°C Maximum Storage Temperature Range . . . . . . . . . . -65°C to 150°C Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C (SOIC and SSOP - Lead Tips Only) *Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications. CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTE: 1. θJA is measured with the component mounted on an evaluation PC board in free air. Electrical Specifications Test Conditions: VCC = +5V ±10%, (VCC = +5V ±5% HIN207E); C1-C4 = 0.1µF; TA = Operating Temperature Range PARAMETER TEST CONDITIONS MIN TYP MAX UNITS SUPPLY CURRENTS Power Supply Current, ICC No Load, TA = 25°C HIN202E HIN206E - HIN208E, HIN211E, HIN213E HIN232E Shutdown Supply Current, ICC(SD) TA = 25°C HIN206E, HIN211E HIN213E LOGIC AND TRANSMITTER INPUTS, RECEIVER OUTPUTS Input Logic Low, VlL Input Logic High, VlH TIN, EN, SD, EN, SD TIN EN, SD, EN, SD Transmitter Input Pullup Current, IP TTL/CMOS Receiver Output Voltage Low, VOL TTL/CMOS Receiver Output Voltage High, VOH TTL/CMOS Receiver Output Leakage RECEIVER INPUTS RS-232 Input Voltage Range, VIN Receiver Input Impedance, RIN Receiver Input Low Threshold, VIN (H-L) TIN = 0V IOUT = 1.6mA (HIN202E, HIN232E, IOUT = 3.2mA) IOUT = -1mA EN = VCC, EN = 0, 0V < ROUT < VCC TA = 25°C, VIN = ±3V VCC = 5V, TA = 25°C Active Mode Shutdown Mode HIN213E R4 and R5 Receiver Input High Threshold, VIN (L-H) VCC = 5V, TA = 25°C Active Mode Shutdown Mode HIN213E R4 and R5 Receiver Input Hysteresis, VHYST VCC = 5V, No Hysteresis in Shutdown Mode - - - - - - 2.0 2.4 - - 3.5 - -30 3.0 - - - - 0.2 8 11 5 1 15 - - - 15 0.1 4.6 0.5 - 5.0 1.2 1.5 1.7 1.5 0.5 15 20 10 10 50 0.8 - - 200 0.4 - ±10 +30 7.0 - - 2.4 2.4 1.0 mA mA mA µA µA V V V µA V V µA V kΩ V V V V V 8 FN4315.16 November 4, 2005
    分享到：
    赞 收藏

    相关推荐

    资料库

    常用器件手册

    共收录43份资料，累计1个分类，关注成员有19位，主要包括：常用

    热门标签

    常用

    最新资料