Photo Scanner Product Overview Quick Guide 1 2 3 4 5 6 7 8 12 13 14 15 Turning on/off the Power Long press button to turn on/off the scanner. Package Contents • Quick Guide • Mini USB Cable • Scanner • Calibration Paper • Photo Protective Sleeve • Lens Cleaner • Roller Cleaner Important Safety Instruction • Keep away from water or moisture and dusty areas. • Never store in hot and very cold areas. • Only use attachments/accessories specifi ed by the • Power Adapter • No objects fi lled with liquids, such as vases, shall be manufacturer. placed on apparatus. • Avoid dust contamination when the scanner is not in use. • When left unused for a long period of time, the unit should be disconnected from the power adapter. • Avoid environments where the scanner would be exposed to direct sunlight (or any other source of excessive heat) for long periods of time. • Protect the scanner from potential liquid spills such as soda, coffee, tea, etc. • Be carefully to keep it without dropping it or strong impact. • Operate the scanner on a level, well-grounded work surface, free of excessive vibration. • Don’t open the scanner case alone without technical support because there is danger of electrical shock. This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Specifi cations Scanner Type: A6 CIS Sheet-fed Scanner Display:1.45” color TFT LCD (128 x 128 pixels) Scan Size: Up to 4"x 6" size Scan Mode: Color / Gray Scan Resolution: 300 / 600 dpi Scan Speed: 3.8 seconds for a 4"x 6" color photo at 300dpi 6.2 seconds for a 4"x 6" color photoat 600dpi Memory Card Slot: MMC/SD (SDHC) I/O Ports: USB mini-B/DC-In Power Supply: 5V 1A File Format: JPG/PDF Dimensions: 180 x 55 x 44.5 mm Weight: 270g/0.6lbs Supported OS for Mass Storage: Windows XP / Vista / 7 ; Mac OS X (10.4 / 10.5 / 10.6) OK ZOOM SCAN SD/MMC DC-IN 5V OK ZOOM SCAN 9 10 11 1 Paper guide 2 LCD screen Playback 3 4 Setting Left button 5 6 7 Menu button Up button Right button /SCAN button 8 9 Feed slot 10 OK/Zoom button Delete button Down button 11 12 Mini USB port 13 Paper exit slot 14 Card slot 15 DC-IN jack • Adjustable paper guide makes easy for guiding paper. • Press to view the scanned images. • Press to make Scan Setting and System Setting. • Moves left in the menus. • Moves to the previous scanned image. • Brings up the Mode menu. • Moves up in the menus. • Moves right in the menus. • Moves to the next scanned image. • Long press to turn the power on/off. • Press slightly to start the image scan. • Feeds the paper or photo for scanning. • Press to make or confi rm the selections in the menus. • Zoom the scanned image. • Brings up the Delete menu. • Moves down in the menus. • Connects to PC for fi le transfer. • Outputs the paper after scanning. • Accommodates a MMC/SD card • Connects to the supplied AC power adapter. Connecting to Power Connect one end of the supplied power adapter to the scanner’s DC-IN 5V jack and the other end to a power socket. Inserting a MMC/SD Card Insert your MMC or SD card into the card slot with the gold contacts facing up. Note: The MMC/SD card must be formatted by the scanner for the fi rst time use. To format the card, refer to the Setting for respective setting. Using the Photo Protective Sleeve It is recommended to use the supplied photo protective sleeve for photo scanning. Please place the photo inside the protective sleeve. Note: Do not place the photo into the protective sleeve if the photo you wish to scan has been laminated. Scanning Make sure the sealed end of the protective sleeve goes fi rst into the feed slot for scanning. 1. Insert the photo, or document facing UP into the feed slot. 2. Adjust the paper guide against the edges of the photo. Open End Sealed End 3. Press SCAN, the photo will be rolled through and scanned. When the scanning is done, the scanned image will appear on the LCD screen and will be saved into the memory card. Note: Be sure to align the photo, or document against the right side of the feed slot if it is smaller than the width of the feed slot. 

Playback View and Zoom the Images Under until the desired size is displayed. Press Playback Menu Note: You can not view the fi les that are not scanned by this scanner on the LCD screen. (Playback) mode, press OK/ZOOM button repeatedly to zoom in the scanned image buttons to move around the image. / / / Connecting to a PC Note: Please power off the scanner before connecting to a PC. 1. With the MMC/SD card inserted into the scanner, connect the mini USB cable to the Scanner and then to a USB 2.0 port on your computer. Playback 2. Press 3. A “Removable Disk” window will appear on the PC. Drag button to turn on the scanner. and drop the scanned images to your PC. Delete One Delete the current displayed image. Select Yes to proceed or No to cancel. Delete All Rotate Exit Delete all the images stored in the memory card. Options: 0°/90°/180°/270°. Each time you perform the rotation, the image will be rotated based on its original scanned orientation. To undo the rotation, select 0° from the menu. Note: The orientation of the scanned images remain unchanged when transferring images to PC, although they have been rotated with this setting. To exit from the current menu. Disconnecting the Scanner from PC Double click the "Safely Remove Hardware" icon in Windows to remove the scanner. Calibrating the Scanner • To get high image quality and good recognition results, please perform the step below from time to time. • Make sure the calibration paper is clean without any dust before use. 1. Insert the calibration paper with the printing side UP into the feed slot. Setting 1. Select 2. Use the 3. Use the 4. Use the (Setting), then press OK/ZOOM button to enter the Setting Menu. / / / buttons to select a menu and press OK/ZOOM button. buttons to select a sub-menu and press OK/ZOOM button. buttons to select an option and press OK/ZOOM button to confi rm the . selection. To exit from the current menu and return to the Setting Menu, select Setting Menu Sub-menu Color Mode Resolution File Type Calibration Clean Exit Language Scan Setting System Setting Descriptions Select Color or Gray mode for the scanning. Select 300 dpi or 600 dpi for the scanning. Select JPG or PDF fi le format for the scanning. Calibrates the scanner. Refer to “Calibrating the scanner” for details. Select to start roller cleaning. To exit from the current menu. Select a screen display language. Formats all the data stored in the memory card. Select Yes to proceed or No to cancel. Format Factory Default Restores the current settings to the factory presets. Select Yes to Exit proceed or No to cancel. To exit from the current menu. 2. Select Setting >Scan Setting > Calibration > Yes. When the calibration is done, the scanner will power itself off automatically. Cleaning the scanner • To get high image quality, please clean your scanner from time to time. • Make sure the roller cleaner and lens cleaner are clean without any dust before use. Use a roller cleaner 1. Power on the scanner. 2. Hold the grip handle of the roller cleaner with the sponge side facing down. 3. Insert the roller cleaner into the front side of the feed slot all the way to the end. 4. Select Clean by following the steps below: Setting > Scan Setting > Clean > Yes. 5. The clean starts. After few seconds, it will stop and output the roller cleaner from the feed slot automatically. Use a lens cleaner 1. Power off the scanner. 2. Hold the grip handle of the lens cleaner wth the sponge side facing down. 3. Insert the lens cleaner with the fabric side facing up into the front side of the feed slot. 4. Move the lens cleaner from one side to the other slightly a few times, then remove it. Sponge Side