第1页 / 共66页
第2页 / 共66页
第3页 / 共66页
第4页 / 共66页
第5页 / 共66页
第6页 / 共66页
第7页 / 共66页
第8页 / 共66页
三洋数码相机-VPC-S500说明书.pdf
INTRODUCTION
Package Contents
GETTING TO KNOW YOUR CAMERA
Front View
Rear View
LCD Monitor Information
2. Flash mode
3. Capture mode
4. Focus mode
5. Possible number of shots
6. Memory status
7. Battery
8. Recorded pixels
9. Image quality
10. White balance
11. ISO sensitivity
12. EV compensation
13. Focus area
14. Zoom bar
2. Flash mode
3. Recordable movie time available
4. Memory status
5. Battery power indicator
6. Focus area
7. Zoom bar
2. Number of image
3. Memory status
4. Battery power indicator
5. Index number of total number
6. DPOF indicator
7. Protect indicator
8. Date
9. Time
10. Aperture
11. Shutter speed
12. EV compensation
13. ISO sensitivity
14. White balance
15. Image quality
16. Recorded pixels
2. Movie mode
3. Number of movie
4. Memory status
5. Battery power indicator
6. Index number of total number
7. Elapsed time
8. Date
9. Time
10. Play/Pause indicator
PREPARING THE CAMERA
Installing the Batteries
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the illustration.
4. Close the battery cover.
Inserting and Removing an SD/SDHC Memory Card (Optional Accessory)
2. Open the SD/SDHC memory card cover.
3. Insert an SD/SDHC memory card in the correct orientation as shown in the illustration.
4. Close the battery/SD/SDHC memory card cover.
Attaching the Camera Strap
LED Indicators and Self-timer Indicators
GETTING STARTED
Turning the Power On/Off
Choosing the Screen Language
2. [Set-up1] is displayed.
3. Use the four-way controller (q) to select [Language], then press the button.
4. Use the four-way controller (pq) to select the language you want.
5. Press the button to confirm.
Setting the Date and Time
2. [Set-up1] is displayed.
3. Use the four-way controller (q) to select [Date & Time] and the four-way controller (tu) to switch the date types, then press the button.
4. Press the four-way controller (tu) to select Day, Month, Year and Time fields.
5. Press the button after all fields are set.
Formatting an SD/SDHC Memory Card or Internal Memory
2. Use the four-way controller (q) to select [Format], then press the button.
3. Use the four-way controller (pq) to select [Yes], then press the button to confirm.
Using the LCD Monitor
2. Press the power switch to turn on the power.
3. Compose your scene on the LCD monitor.
4. Press the shutter release button.
PHOTOGRAPHY MODE
Shooting Images
2. Compose the image on the LCD monitor screen so that the main subject is within the focus frame.
3. Press the shutter release button down halfway to focus the image.
4. Press the shutter release button the rest of the way down to capture the image.
Mode Dial
2.
3.
4.
5.
6.
7.
8.
Setting the Panorama Mode
2. Shoot the first image.
3. Orient the camera so that the second frame overlaps a small portion of the photographic subject of the first image and press the shutter button to capture the next image.
4. Follow the same steps to capture subsequent images in the sequence.
5. Finish the sequence by pressing the MENU button or rotate to another mode after the last image has been recorded.
Setting Image Resolution and Quality
2. Press the MENU button.
3. Use the four-way controller (q) to select [Image Size], then press the button.
4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
5. Follow the step 3 and 4 above to set the [Quality].
Using the Zoom Function
2. Adjust the magnification ratio by using the / button.
3. Compose your scene and press the shutter release button.
Using the Flash
2. Press the power switch to turn on the power.
3. Press the four-way controller (t/). The flash mode changes each time the button is pressed. You can also change the setting using the four-way controller (pq).
4. Press the button to confirm the setting.
5. Compose your scene and press the shutter release button.
Setting Focus
2. Press the power switch to turn on the power.
3. Press the four-way controller (u/). The focus mode changes each time the button is pressed. You can also change the setting using four-way controller (pq).
4. Press the button to confirm the setting.
5. Compose your scene and press the shutter release button.
CAPTURE MODE
Burst
2. Press the power switch to turn on the power.
3. Press the four-way controller (p/) and use (p) to select [Burst]. You can also change the setting using four-way controller (tu).
4. Press the button to confirm the setting. The indicator is displayed on the monitor screen.
5. Press the shutter release button halfway to lock the focus.
6. Press the shutter release button to capture a sequence of images.
Auto Bracket
2. Press the power switch to turn on the power.
3. Press the four-way controller (p/) and use (p) to select [AEB]. You can also change the setting using the four-way controller (tu).
4. Press the button to confirm the setting. The indicator is displayed on the LCD monitor screen.
5. Press the shutter release button to capture the three images.
Self-Timer
2. Rotate the mode dial to , , , , , or .
3. Press the power switch to turn on the power.
4. Press the four-way controller (p/) and use (p) to select your desired self-timer mode. You can also change the setting using four-way controller (tu).
5. Press the button to confirm the setting.
6. Compose your scene and press the shutter release button.
Adjusting the Exposure (EV Compensation)
2. Press the power switch to turn on the power.
3. Press the four-way controller (q/) and use tu to set the range of EV compensation value from -2.0EV to +2.0EV.
4. Press the button to confirm the setting.
Setting White Balance
2. Press the power switch to turn on the power.
3. Press the MENU button. [Mode1] is displayed.
4. Use the four-way controller (q) to select [W. Balance], then press the button.
5. Use the four-way controller (pq) to select the desired white balance setting, then press the button to confirm.
6. To cancel the setting, press the MENU button and exit the menu.
7. Press the shutter release button to capture the image.
PLAYBACK MODE - THE BASICS
Viewing Images
2. Press the button.
3. Use the four-way controller (tu) to select the desired images.
Magnifying Images
2. Adjust the zoom ratio by using the / button.
3. To view different portions of the images, press the four-way controller (pqtu) to adjust the display area.
Thumbnail Display
2. Press the button once.
3. Use the four-way controller (pqtu) to move the cursor to select the image to be displayed at regular size.
4. Press the or / button to display the selected image on full screen.
Slideshow Display
2. Press the MENU button to access the Playback menu. Then use the four-way controller (q) to select [Slide Show] and press the button.
3. Use the four-way controller (pq) to set the playback interval, then press the button.
Resizing an Image
2. In the mode, use the four-way controller (tu) to select the desired images.
3. Press the MENU button to access the Playback menu. Press the four-way controller (u) to select [Playback2] and press (q) to select [Resize] and press the button.
4. Use the four-way controller (pq) to select the desired setting, then press the button to confirm.
MOVIE MODE
Recording Movie Clips
2. Press the shutter release button to start recording.
3. To stop recording, press the shutter release button again.
Playing Back Movie Clips
2. Use the four-way controller (tu) to go through the images until the movie clip you want to play back is displayed.
3. Press the button to start playing back the movie clips.
PLAYBACK MODE - ADVANCED FEATURES
Deleting Images/Movie Clips
2. Press the button.
3. Use the four-way controller (tu) to select the image/movie clip you want to delete.
4. Press the button to delete.
5. Use the four-way controller (pq) to select [This Image] or [All Images] by your preference, then press the button.
6. When the delete message appears, use the four-way controller (pq) to select [Yes], then press the button to confirm the deletion.
Protecting Images/Movie Clips
2. In the mode, use the four-way controller (tu) to select the desired images.
3. Press the MENU button, then use the four-way controller(q) to select [Protect] and press the button.
4. Use the four-way controller (pq) to choose the desired setting, then press the button.
5. Use the four-way controller (pq) to select [Lock], then press the button to confirm.
Setting the DPOF
2. Press the MENU button. Use the four-way controller (pq) to select [DPOF], then press the button.
3. Use the four-way controller (pq) to select by your preference, then press the button.
4. Use the four-way controller (pq) to select by your preference, then press the button.
5. Press the MENU button to return to the image playback mode.
TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER
Connect the digital camera to your computer
2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode].
3. Press the button.
4. Use the four-way controller (q) to select [PC], then press the button.
5. Turn off your camera.
6. Connect your camera and the computer via the supplied USB cable.
7. Turn your camera on by pressing the power switch.
8. There will be a new “Removable Disk” icon detected in “My Computer”, which contains your recorded images or movie clips. (For Mac users, double-click [untitled] or [unlabeled] disk drive icon on our desktop.)
Download images or movie clips
EDITING SOFTWARE INSTALLATION
Installing Photo Explorer
2. When the welcome screen appears, click “Photo Explorer 8.0”. Follow the on-screen instructions to complete the installation.
Installing Photo Express
2. When the welcome screen appears,click “Photo Express 5.0”. Follow the on-screen instructions to complete the installation.
Installing Cool 360
2. When the welcome screen appears, click “Cool 360”. Follow the on-screen instructions to complete the installation.
MENU OPTIONS
Camera Menu
2. Press the MENU button, then use the four-way controller (tu) to select the [Mode1] / [Mode2] / [Mode3] menu.
3. Use the four-way controller (pq) to select the option item, then press the button.
4. Press the four-way controller (pq) to select the desired setting, then press the button.
Movie Menu
2. Press the MENU button.
3. Press the four-way controller (pq) to select the option item. Then press the button
4. Press the four-way controller (pq) to select the desired setting, then press the button.
5. To exit the movie menu, press the MENU button.
Playback Menu
2. Press the MENU button, then use the four-way controller (pq) to select the [Playback1] / [Playback2] menu.
3. Use the four-way controller (pq) to select the option item, then press the button.
4. Press the four-way controller (pq) to select the desired setting, then press the button.
5. To exit the playback menu, press the MENU button.
Setup Menu
2. Press the four-way controller (tu) to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
3. Use the four-way controller (pq) to select the desired option item, then press the button.
4. To exit the setup menu, rotate the mode dial to another mode.
SPECIFICATIONS
TROUBLESHOOTING GUIDE
POSSIBLE NUMBER OF RECORDABLE IMAGES
CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER
2. Press the four-way controller (u) to select the [Set-up2] menu, then use the four-way controller (q) to select [USB Mode]. Press the button.
3. Use the four-way controller (pq) to select [PictBridge], then press the button.
4. Connect your camera and the printer via a supplied USB cable.
SYDC-5360_EN_Preface.pdf
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
VPC-S500
5 Mega Pixel Digital Camera
FCC STATEMENT (For customers in USA)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for Class B digital devices,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15
of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you could
be required to stop operation of the equipment.
EN-1
READ THIS FIRST
Trademark Information
Microsoft® and Windows® are U.S.
Corporation.
registered
trademarks of Microsoft
Pentium® is a registered trademark of Intel Corporation.
Macintosh is a trademark of Apple Computer, Inc.
SD™ is a trademark.
Photo Explorer and Photo Express are trademarks.
Other names and products may be trademarks or registered trademarks of their
respective owners.
Product Information
Product design and specifications are subject to change without notice. This
includes primary product specifications, software, software drivers, and user’s
manual. This User Manual is a general reference guide for the product.
The product and accessories that come with your digital camera may be different
from those described in this manual. This is due to the fact that different retailers
often specify slightly different product inclusions and accessories to suit their
market requirements, customer demographics, and geographical preferences.
Products very often vary between retailers especially with accessories such as
batteries, chargers, memory cards, cables, carrying cases/pouches, and language
support. Occasionally a retailer will specify a unique product color, appearance,
and internal memory capacity. Contact your dealer for precise product definition
and included accessories.
The illustrations in this manual are for the purpose of explanation and may differ
from the actual design of your digital camera.
The manufacturer assumes no liability for any errors or discrepancies in this user
manual.
For user manual and driver updates, refer to our website or contact your dealer.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway
(fail), restart the application or disconnect and connect the communication cable
(USB, etc.) again.
EN-2
SAFETY INSTRUCTIONS
Read and understand all Warnings and Cautions before using this product.
Warnings
If foreign objects or water have entered the camera, turn the power
OFF and remove the batteries.
Continued use in this state might cause fire or electric shock. Consult the
store of purchase.
If the camera has fallen or its case has been damaged, turn the power
OFF and remove the batteries.
Continued use in this state might cause fire or electric shock. Consult the
store of purchase.
Do not disassemble, change or repair the camera.
This might cause fire or electric shock. For repair or internal inspection, ask
the store of purchase.
Do not use the camera in areas near water.
This might cause fire or electric shock. Take special care during rain, snow,
on the beach, or near the shore.
Do not place the camera on inclined or unstable surfaces.
This might cause the camera to fall or tilt over, causing injury.
Keep the batteries out of the reach of children.
Swallowing batteries might cause poisoning. If the battery is accidentally
swallowed, immediately consult a physician.
Do not use the camera while you are walking, driving or riding a
motorcycle.
This might cause you to fall over or result in traffic accident.
EN-3
Cautions
Insert the batteries paying careful attention to the polarity (+ or –) of
the terminals.
Inserting the batteries with its polarities inverted might cause fire and injury,
or damage to the surrounding areas due to the battery rupturing or leaking.
Do not fire the flash close to anyone’s eyes.
This might cause damage to the person’s eyesight.
Do not subject the LCD monitor to impact.
This might damage the glass on the screen or cause the internal fluid to
leak. If the internal fluid enters your eyes or comes into contact with your
body or clothes, rinse with fresh water. If the internal fluid has entered your
eyes, consult a physician to receive treatment.
A camera is a precision instrument. Do not drop it, strike it or use
excessive force when handling the camera.
This might cause damage to the camera.
Do not use the camera in humid, steamy, smoky, or dusty places.
This might cause fire or electric shock.
Do not remove the battery immediately after long period of continuous
use.
The battery becomes hot during use. Touching a hot battery might cause
burns.
Do not wrap the camera or place it in cloth or blankets.
This might cause heat to build up and deform the case, resulting in fire. Use
the camera in a well-ventilated place.
Do not leave the camera in places where the temperature may rise
significantly, such as inside a car.
This might adversely affect the case or the parts inside, resulting in fire.
Before you move the camera, disconnect cords and cables.
Failure to do this might damage cords and cables, resulting in fire and
electric shock.
EN-4
Warning:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
FOR AMERICAN USERS
The following advisory is included in accordance with the laws of the State of
California (USA):
WARNING:
This product contains chemicals, including lead, known to the States of California to
cause cancer, birth defects or other reproductive harm. Wash hands after handling.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designated
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
EN-5
FOR CANADIAN USERS
This Class B digital apparatus complies with Canadian ICES-003
FOR EU USERS
Note:
This symbol mark and recycle system apply to EU countries and
do not apply to countries in other areas of the world.
Your SANYO product is designed and manufactured with high
quality materials and components which can be recycled and
reused.
This symbol means that electrical and electronic equipment, at their
end-of-life, should be disposed of separately from your household
waste.
Please dispose of the equipment at your local community waste
collection/recycling centre.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help up to conserve the environment we live in!
Symbols used in this manual
Points giving some extended instructions or special points to pay attention
to.
You many find the answers to questions or problems concerning camera operation in
the section “TROUBLESHOOTING GUIDE”.
EN-6
FCC Information
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Declaration of Conformity
Model number: VPC-S500
Trade Name: SANYO
Responsible party: SANYO FISHER COMPANY
Address: 21605 Plummer Street, Chatsworth, California 91311
Telephone No.: (818) 998-7322
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that
may cause undesired operation.
Canadian ICES-003 information
This class B digital apparatus complies with Canadian ICES-003.
EN-7
相关推荐
2023年江西萍乡中考道德与法治真题及答案.doc
2012年重庆南川中考生物真题及答案.doc
2013年江西师范大学地理学综合及文艺理论基础考研真题.doc
2020年四川甘孜小升初语文真题及答案I卷.doc
2020年注册岩土工程师专业基础考试真题及答案.doc
2023-2024学年福建省厦门市九年级上学期数学月考试题及答案.doc
2021-2022学年辽宁省沈阳市大东区九年级上学期语文期末试题及答案.doc
2022-2023学年北京东城区初三第一学期物理期末试卷及答案.doc
2018上半年江西教师资格初中地理学科知识与教学能力真题及答案.doc
2012年河北国家公务员申论考试真题及答案-省级.doc
2020-2021学年江苏省扬州市江都区邵樊片九年级上学期数学第一次质量检测试题及答案.doc
2022下半年黑龙江教师资格证中学综合素质真题及答案.doc
