DIGITAL VIDEO CAMERA
GR-DVL210
Please visit our Homepage on the World Wide
Web and answer our Consumer Survey
(in English only):
http://www.jvc-victor.co.jp/english/index-e.html
CONTENTS
AUTOMATIC
DEMONSTRATION
GETTING STARTED
ENGLISH
5
6 – 12
BASIC RECORDING &
PLAYBACK
13 – 21
BASIC RECORDING ............ 14 – 17
BASIC PLAYBACK .............. 18 – 21
ADVANCED
FEATURES
22 – 49
FOR RECORDING ................ 23 – 30
USING THE MENU FOR
DETAILED ADJUSTMENT ...... 31 – 36
DUBBING ......................... 37 – 38
USING THE REMOTE
CONTROL UNIT ................ 39 – 47
SYSTEM CONNECTIONS ........ 48 – 49
REFERENCES
50 – 69
DETAILS ................................... 51
TROUBLESHOOTING ............ 52 – 56
USER MAINTENANCE ................... 57
INDEX ............................. 58 – 62
CAUTIONS ........................ 63 – 65
TERMS .................................... 66
SPECIFICATIONS ......................... 67
LYT0724-001A EN
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No. which is located on the
bottom of cabinet. Retain this information for future reference.
Model No.
Serial No.
2 EN
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and
precautions contained in the following pages to ensure safe use of this product.
Using This Instruction Manual
•All major sections and subsections are listed in the Table Of Contents on the cover page.
•Notes appear after most subsections. Be sure to read these as well.
•Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
.... refer to the Index (墌 pgs. 58 – 62) and familiarize yourself with button locations, etc. before use.
.... read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely
important information regarding the safe use of this product.
You are recommended to carefully read the cautions on pages 63 through 65 before use.
SAFETY PRECAUTIONS
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
NOTES:
●The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of
the main unit.
●The rating information and safety caution of the
AC Adapter are on its upper and lower sides.
CAUTIONS:
● This camcorder is designed to be used with NTSC-type color television signals. It cannot be used for
playback with a television of a different standard. However, live recording and LCD monitor/viewfinder
playback are possible anywhere.
● Use the JVC BN-V408U/V416U/V428U battery packs and, to recharge them or to supply power to the
camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion
adapter may be necessary to accommodate different designs of AC outlets in different countries.)
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be placed on the apparatus.
When discarding batteries, environmental problems must be considered and the local rules or laws
governing the disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
IMPORTANT SAFETY INSTRUCTIONS
EN3
(1) Read these instructions.
(2) Keep these instructions.
(3) Heed all warnings.
(4) Follow all instructions.
(5) Do not use this apparatus near water.
(6) Clean only with dry cloth.
(7) Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
(8) Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
(9) Only use attachments/accessories specified
by the manufacturer.
(10) Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer, or
sold with the
apparatus. When a
cart is used, use
caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
(11) Unplug this apparatus during lightning
storms or when unused for long periods of
time.
(12) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
SAFETY PRECAUTIONS
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as
lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying
or holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the
unit, or in a malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the
camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to
the camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, etc.) to the camcorder and leaving the unit on top of the
TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in
damage.
4 EN
PROVIDED ACCESSORIES
•AC Adapter
AP-V10U
•Remote Control Unit
RM-V715U
•Battery Pack
BN-V408U
•AAA (R03) Battery x 2
(for remote control unit)
•Lens Cap (墌 pg. 5
for attachment)
•Shoulder Strap
•Audio/Video Cable
(ø3.5 mini-plug to RCA plug)
NOTE:
In order to maintain optimum performance of the camcorder, provided cables may be equipped
with one or more core filter.
AUTOMATIC DEMONSTRATION
EN5
Automatic Demonstration takes place when “DEMO MODE”
is set to “ON” (factory-preset).
䡲 Available when the Power Switch is set to “
” and
” or “
no cassette is in the camcorder.
䡲 Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is performed
for more than 1 minute after that, the demonstration will
resume.
䡲 “DEMO MODE” remains “ON” even if the camcorder
power is turned off.
䡲 To cancel Automatic Demonstration:
1. Set the Power Switch to “
” while pressing down the
Lock Button located on the switch and press the MENU/
BRIGHT wheel in. The Menu Screen appears.
2. Rotate the MENU/BRIGHT wheel to select “
SYSTEM”
and press it. The SYSTEM Menu appears.
3. Rotate the MENU/BRIGHT wheel to select “DEMO
MODE” and press it. The Sub Menu appears.
4. Rotate the MENU/BRIGHT wheel to select “OFF” and
press it.
5. Rotate the MENU/BRIGHT wheel to select “1RETURN”,
and press it twice. The normal screen appears.
MENU/BRIGHT Wheel
Power Switch
Lock Button
Sub Menu
DEMO
MODE
–
OFF
ON
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor or viewfinder.
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
1
2
3
6 EN
GETTING STARTED
GETTING STARTED
CONTENTS
Power .................................................. 7 – 8
Grip Adjustment ........................................... 9
Viewfinder Adjustment .................................... 9
Shoulder Strap Attachment ............................... 9
Tripod Mounting ............................................ 9
Date/Time Settings...................................... 10
Loading/Unloading A Cassette ......................... 11
Recording Mode Setting ................................. 12
BAT. RELEASE Switch
1
2
3
Power Switch
CHARGE Lamp
Battery pack
AC Adapter
5
To AC outlet
4
To DC
connector
Battery pack
Charging time
BN-V408U
approx. 1 hr. 30 min.
BN-V416U (optional)
approx. 2 hrs.
BN-V428U (optional)
approx. 3 hrs. 20 min.
EN7
Power
This camcorder’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
CHARGING THE BATTERY PACK
1 Tilt the viewfinder upward 1. With the arrow on the
battery pack pointing downward, push the battery
pack slightly against the battery pack mount 2, then
slide down the battery pack until it locks in place 3.
Adapter to the camcorder 4.
2 Set the Power Switch to “OFF”. Connect the AC
3 Plug the AC Adapter into an AC outlet 5.
4 When the CHARGE lamp stops blinking but stays lit,
The CHARGE lamp on the camcorder blinks to
indicate charging has started.
charging is finished. Unplug the AC Adapter from the
AC outlet. Disconnect the AC Adapter from the
camcorder.
To Detach The Battery Pack . . .
.... slide BAT. RELEASE and pull out the battery pack.
NOTES:
● If the protective cap is attached to the battery pack,
remove it first.
● During charging, the camcorder cannot be operated.
● Charging is not possible if the wrong type of battery is
used.
● When charging the battery pack for the first time or after
a long storage period, the CHARGE lamp may not light.
In this case, remove the battery pack from the
camcorder, then try charging again.
● If the battery operation time remains extremely short
even after having been fully charged, the battery is worn
out and needs to be replaced. Please purchase a new
one.
● Using the optional AA-V40U AC Power Adapter/
Charger, you can charge the BN-V408U/V416U/V428U
battery pack without the camcorder. However, it cannot
be used as an AC adapter.
CONTINUED ON NEXT PAGE
For other notes, 墌 pg. 51
8 EN
ATTENTION:
Before detaching the power source, make
sure that the camcorder’s power is turned
off. Failure to do so can result in a
camcorder malfunction.
NOTES:
● Recording time is reduced significantly under
the following conditions:
•Zoom or Record-Standby mode is engaged
repeatedly.
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
● Before extended use, it is recommended that
you prepare enough battery packs to cover 3
times the planned shooting time.
GETTING STARTED (cont.)
USING THE BATTERY PACK
Perform step 1 of “CHARGING THE BATTERY PACK”
(墌 pg. 7).
Approximate recording time (unit: min.)
Battery pack
BN-V408U
BN-V416U
(optional)
BN-V428U
(optional)
BN-V840U
(optional)
BN-V856U
(optional)
LCD monitor on
1 hr.
2 hrs.
Viewfinder on
1 hr. 15 min.
2 hrs. 30 min.
3 hrs. 30 min.
4 hrs. 20 min.
5 hrs.
7 hrs.
6 hrs. 15 min.
8 hrs. 40 min.
INFORMATION:
The extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/Charger:
VU-V840 KIT :BN-V840U battery pack & AA-V15U AC Power Adapter/Charger
VU-V856 KIT :BN-V856U battery pack & AA-V80U AC Power Adapter/Charger
Read the kit's instruction manual before using.
Neither BN-V840U nor BN-V856U can be charged by using the AC Adapter provided with this camcorder. Use only
the AA-V15U AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80U AC Power Adapter/Charger
for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect the
BN-V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.
AC Adapter
To AC outlet
To DC connector
USING AC POWER
Use the AC Adapter (connect as shown in the illustration).
NOTES:
●The provided AC Adapter features automatic voltage
selection in the AC range from 110 V to 240 V.
●For other notes, 墌 pg. 51.
Lithium-ion is vulnerable in colder temperatures.
About Batteries
DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may
cause a fire or explosion.
WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a
short circuit and possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold
temperatures (below 10°C/50°F), its usage time becomes shorter and it may cease to function. If this happens,
place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the
camcorder. As long as the battery pack itself is not cold, it should not affect performance.
(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)