Mimaki打印机-GP-1810D说明书.pdf

发布时间：2022-05-19 发布人：admin 分类：说明书资料大小：2.97M 资料格式：pdf 举报版权申诉

GP1810D_Operation_D201264_V1.1.pdf-第1页.png

第1页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第2页.png

第2页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第3页.png

第3页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第4页.png

第4页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第5页.png

第5页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第6页.png

第6页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第7页.png

第7页 / 共152页

GP1810D_Operation_D201264_V1.1.pdf-第8页.png

第8页 / 共152页

TABLE OF CONTENTS

Foreword

On This Operation Manual

Features

Safety precautions during installation

Safety symbols used in manual

Example of pictorials within the manual

Never do the following

Precautions in use

Precautions in installation

How to read this operation manual

Display on the LCD and Indication of the Keys

Structure of this Operation Manual

CHAPTER 1 Before Use

Where to install the machine

Moving the machine

Configuration and function

The Front

The Rear

Operation Panel

Capping station

Carriage

Ink cartridge and Ink station

Precautions in handling the ink cartridge

Ink station

Types of work that can be used

Sizes of work that can be used

Precautions in handling the work

Direct printing on a cloth

MENU mode

CHAPTER 2 Basic Operations

Operation

Switching on the power supply

Turning the power on

Filling of discharge liquid at the time of starting works

Station cover

Opening/closing the station cover

Adjusting the head height

Setting the work on the machine

Fixing the work holder

Establishing the origin and the print area

Initial value

Changing the origin and the print area

Checking and solving nozzle clogging

Correcting the work feed rate

Correcting the media feed rate during printing

Printing an image from source data

Starting the printing operation

Interrupting the printing operation

Displaying machine information

To replenish ink, set a new ink cartridge in the ink station

Filling of the washing liquid at the end of the works

Turning the power off

CHAPTER 3 Daily Care

Routine maintenance

When the machine is left unused for a long period of time

Precautions during cleaning

Maintenance for frame components

Washing ink from the slider surface

Filling of the washing liquid at the end of the works

Cleaning the wiper cap and wiper cleaner

Cleaning the nozzle [Nozzle Cleaning]

Replacing the flushing tray ink absorber

When the waste ink tank becomes full

Ink discharge way cleaning [Drain Wash]

When not in use the machine over the long term [Storage Wash]

CHAPTER 4 How to Set Functions

Basic operations of menus

Function mode

Registering a type

Changing the type

Setup functions

Change the display language [DISPLAY]

CHAPTER 5 Maintenance

Maintenance of the machine

Setting the maintenance function

Maintenance setup functions

Printing setup conditions [LIST]

Printing HEX CODE [DATA DUMP]

When medium thickness is changed [Print Adjust]

Cleaning the station interior [Station]-[Carriage Out]

When the message [Replace Wiper] is displayed [Station]-[Wiper Exchng]

Fill up the ink [Ink Filling]

Set up the ink of different type [Ink Change]

Displaying the firmware version [INFORMATION]

Execute the flushing and cleaning regularly [Routine Control]

Specifying the print head line [Use Head]

CHAPTER 6 When Abnormal Conditions Are Encountered

Abnormal conditions where no error massage appears

The machine cannot be energized

The machine cannot perform printing

If image quality declines

While lines/thin spots are obvious or dark stripes occur (In the direction of travel of the head)

Characters fluctuate doubly or triply into paper feed

Displacement is observed between outward and inward printing

The respective color ink injected by the respective color heads do not properly overlap

Large ink drop on medium

Become lighter during the printing and then printing without ink

When printing trouble occurs in

Unable to discharge

Impaired discharge function

Some strip streaks occur on the image with narrow print width

Problems where error messages are given on the LCD

Errors accompanied by warnings

Error messages

APPENDIX

Basic specifications

Ink specification

Discharge liquid / Washing liquid specification

Consumable items

Location of safety labels

Other labels

Function flowchart

OPERATION MANUAL MIMAKI ENGINEERING CO., LTD. TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, Japan Phone: +81-3-5420-8671 Fax: +81-3-5420-8687 URL: http: // www.mimaki. co. jp / E-mail: trading@mimaki.co.jp D201264

DISCLAIMER OF WARRANTY THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM- PLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS, AND MIMAKI NEITHER ASSUMES NOR AU- THORIZES DEALER TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABIL- ITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY IN CONNECTION WITH ANY PRODUCT WITHOUT MIMAKIÅfS PRIOR WRITTEN CONSENT. IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDEN- TAL OR CONSEQUENTIAL DAMAGES OR FOR LOSS OF PROFITS OF DEALER OR CUSTOMERS OF ANY PRODUCT. Requests • This Manual has been carefully prepared for your easy understanding, how- ever, please do not hesitate to contact a distributor in your district if you have any inquiry. • Description contained in this Manual are subject to change without notice for improvement. • Generally, names and designations referred to in this Manual are trade marks or registered trade marks of the manufacturers or suppliers. Reproduction of this manual is strictly prohibited. Copyright © 2005 MIMAKI ENGINEERING Co., Ltd. All Rights Reserved.

FCC Statement (USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a commer- cial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which cause the user will be required to correct the interference at his own expense. • In the case where MIMAKI-recommended cable is not used for connection of this device, limits provided by FCC rules can be exceeded. To prevent this, use of MIMAKI-recommended cable is essential for the connection of this device. INTERFERENCE TO TELEVISIONS AND RADIOS The product covered by this Instruction Manual produces low radio waves while it is in operation. The product can interfere with radios and televisions if set up or commissioned under improper conditions. The product is not guaranteed against any damage to specific- purpose radio and televisions. The product’s interference with your radio or television will be checked by turning on/off the power switch of the product. In the event that the product is the cause of interference, try to eliminate it by taking one of the following corrective measures or taking some of them in combination. • Change the direction of the receiving antenna or the feeder of your radio/television. • Change the installing direction of the product. • Move the receiver away from the product. • Use a power line for the receiver that is not shared with the prod- uct. LASER SAFETY This Model is certified as a Class I laser product under the U.S. Department of Health and Human Services Radiation Performance standard according to the Radiation Control for Health and Safety Act of 1968. This means that this Model does not produce hazardous laser radiation. CDRH REGULATION The Center for Devices and Radiological Health for the U.S. Food and Drug Administration Implement regulations for laser products. The Label shown below indicates compliance with the CDRH regulations and is labeled on the product when marketed in the United States. This Model is equivalent to Class I laser device according to CDRH Regulation. This product complies with 21 CFR chapter I and subchapter J.

Foreword Congratulations on your purchase of a Garment Printer “GP-1810D”. GP-1810D allows the original discharge liquid to print directly cloths and take some color off with 4-color original ink. Read this Operation Manual carefully and make the most effective use of your printer. • [GP-1810D] shifts by a high-speed head. To avoid danger of injury or damage, be sure to read this Operation Manual carefully before start- ing to operate it. On This Operation Manual • This Operation Manual describes the operation and maintenance of Garment Printer GP-1810D (hereinafter referred to as the machine). • Please read and fully understand this Operation Manual before putting the machine into service. It is also necessary to keep this Operation Manual on hand. • Make arrangements to deliver this Operation Manual to the person in charge of the operation of this machine. • This Operation Manual has been carefully prepared for your easy understanding, how- ever, please do not hesitate to contact a distributor in your district or our office if you have any inquiry. • Description contained in this Operation Manual are subject to change without notice for • improvement. In the case where this Operation Manual should be illegible due to destruction by fire or breakage, purchase another copy of the Operation Manual from our office. - i -

TABLE OF CONTENTS Foreword .................................................................................................. i On This Operation Manual ............................................................... i Features .................................................................................................. vi Safety precautions during installation ................................................... viii Safety symbols used in manual ................................................... viii Example of pictorials within the manual ....................................... viii Never do the following ................................................................... ix Precautions in use .......................................................................... x Precautions in installation ............................................................. xii How to read this operation manual ....................................................... xiii Display on the LCD and Indication of the Keys............................ xiii Structure of this Operation Manual .............................................. xiv CHAPTER 1 Before Use Where to install the machine ................................................................ 1.2 Moving the machine ............................................................................. 1.3 Configuration and function ................................................................... 1.4 The Front .................................................................................... 1.4 The Rear ..................................................................................... 1.5 Operation Panel .......................................................................... 1.6 Capping station ........................................................................... 1.8 Carriage ...................................................................................... 1.9 Ink cartridge and Ink station ............................................................... 1.10 Precautions in handling the ink cartridge ...................................1.10 Ink station................................................................................... 1.11 Types of work that can be used ......................................................... 1.12 Sizes of work that can be used ................................................. 1.12 Precautions in handling the work .............................................. 1.12 Direct printing on a cloth .................................................................... 1.13 MENU mode ...................................................................................... 1.14 CHAPTER 2 Basic Operations Operation ............................................................................................. 2.2 Switching on the power supply ............................................................ 2.3 Turning the power on ...................................................................2.3 Filling of discharge liquid at the time of starting works ......................... 2.4 Station cover ........................................................................................ 2.6 Opening/closing the station cover ............................................... 2.6 Adjusting the head height .................................................................... 2.7 - ii -

Setting the work on the machine .......................................................... 2.8 Fixing the work holder ................................................................. 2.9 Establishing the origin and the print area ........................................... 2.10 Initial value .................................................................................2.10 Changing the origin and the print area....................................... 2.11 Checking and solving nozzle clogging ............................................... 2.12 Correcting the work feed rate ............................................................. 2.15 Correcting the media feed rate during printing ................................... 2.17 Printing an image from source data ................................................... 2.18 Starting the printing operation ................................................... 2.18 Interrupting the printing operation ............................................. 2.19 Displaying machine information ......................................................... 2.20 To replenish ink, set a new ink cartridge in the ink station ................. 2.21 Filling of the washing liquid at the end of the works ........................... 2.22 Turning the power off ......................................................................... 2.24 CHAPTER 3 Daily Care Routine maintenance ........................................................................... 3.2 When the machine is left unused for a long period of time ......... 3.2 Precautions during cleaning ........................................................ 3.2 Maintenance for frame components ............................................3.3 Washing ink from the slider surface ............................................ 3.3 Filling of the washing liquid at the end of the works ............................. 3.4 Cleaning the wiper cap and wiper cleaner ........................................... 3.6 Cleaning the nozzle [Nozzle Cleaning] ................................................ 3.9 Replacing the flushing tray ink absorber ............................................ 3.12 When the waste ink tank becomes full ............................................... 3.14 Ink discharge way cleaning [Drain Wash] .......................................... 3.15 When not in use the machine over the long term [Storage Wash] ..... 3.17 CHAPTER 4 How to Set Functions Basic operations of menus ................................................................... 4.2 Function mode ..................................................................................... 4.4 Registering a type ....................................................................... 4.4 Changing the type ....................................................................... 4.4 Setup functions .................................................................................... 4.5 Change the display language [DISPLAY]............................................. 4.8 - iii -

CHAPTER 5 Maintenance Maintenance of the machine ................................................................ 5.2 Setting the maintenance function................................................ 5.2 Maintenance setup functions ...................................................... 5.3 Printing setup conditions [LIST] ........................................................... 5.4 Printing HEX CODE [DATA DUMP] ...................................................... 5.5 When medium thickness is changed [Print Adjust] .............................. 5.6 Cleaning the station interior [Station]-[Carriage Out] ........................... 5.8 When the message [Replace Wiper] is displayed [Station]-[Wiper Exchng] ..... 5.9 Fill up the ink [Ink Filling] ................................................................... 5.11 Set up the ink of different type [Ink Change] ...................................... 5.12 Displaying the firmware version [INFORMATION] ............................. 5.15 Execute the flushing and cleaning regularly [Routine Control] .......... 5.16 Specifying the print head line [Use Head] .......................................... 5.18 CHAPTER 6 When Abnormal Conditions Are Encountered Abnormal conditions where no error massage appears ...................... 6.2 The machine cannot be energized .............................................. 6.2 The machine cannot perform printing ......................................... 6.2 If image quality declines ....................................................................... 6.3 While lines/thin spots are obvious or dark stripes occur (In the direc- tion of travel of the head) ............................................................ 6.3 Characters fluctuate doubly or triply into paper feed .................. 6.3 Displacement is observed between outward and inward printing 6.3 The respective color ink injected by the respective color heads do not properly overlap .................................................................... 6.3 Large ink drop on medium .......................................................... 6.3 Become lighter during the printing and then printing without ink 6.3 When printing trouble occurs in ........................................................... 6.4 Unable to discharge .................................................................... 6.4 Impaired discharge function ........................................................ 6.4 Some strip streaks occur on the image with narrow print width .. 6.4 Problems where error messages are given on the LCD ...................... 6.5 Errors accompanied by warnings................................................ 6.5 Error messages........................................................................... 6.8 - iv -

分享到：

赞收藏

资料库

Mimaki打印机-GP-1810D说明书.pdf

相关推荐

打印机

热门标签

最新资料