第1页 / 共118页
第2页 / 共118页
第3页 / 共118页
第4页 / 共118页
第5页 / 共118页
第6页 / 共118页
第7页 / 共118页
第8页 / 共118页
Mimaki打印机-GP-604说明书.pdf
TABLE OF CONTENTS
Foreword
On This Operation manual
Features
For safe operation
Pictorial signs
Example of pictorial signs
Never Do the Following
Precautions in installation
Precautions in use
How to read this operation manual
Display on the LCD and Indication of the Keys
Structure of this Operation manual
CHAPTER 1 Name and Function of each section
The Front
The Rear
Operation Panel
Carriage
Capping station
Heater
Setting the heater voltage
Ink station
MENU mode
CHAPTER 2 Operation
Operation
Switching on the power supply
Turning the power on
Front cover
Opening/closing the front cover
If opened the front cover during plotting...
Adjusting the suitable temperature of heater
Checking and solving nozzle clogging
Print the test pattern
If printed abnormal pattern
Setting Garment (T-shirt)
When using the T-shirt plate
Read the thickness of the garment (T-shirt)
Plotting an Image from source data
Starting the plotting operation
Interrupting the plotting operation
When the message [ERROR71 WORK TOO HIGH] is displayed ...
Heat with a press
To replenish ink, set a new ink cartridge in the ink station
Turning the power off
CHAPTER 3 Daily cleaning
Daily Maintenance
Notes on cleaning
If the frame components of the device/table/T-shirt plate have stained
Cleaning the wiper and ink caps
When the waste ink tank becomes full
CHAPTER 4 Setting Function
Basic operations of menus
Register the function on each purpose (Type Registration)
Registering a type
Changing the type
Setup functions
Effective Plotting Area
Set the print area
Set the type of ink to be used [INK TYPE]
Set the ORIGIN
Change the head height (the head-gap)
Correcting the garment feed rate [FEED COMP.]
Change the Language on LCD
CHAPTER 5 Maintenance
Maintenance of the device
Invoking a maintenance function
Setup functions
Cleaning the station interior [STATION]-[CARRIAGEout]
When the message [REPLACE WIPER] is displayed [STATION]-[WIPER EXCHANGE]
Cleaning the nozzle [NOZZLE WASH]
Ink discharge way cleaning [Disway WASH]
When not in use the plotter over the long term [CUSTODYwash]
Adjusting between the two plotting directions [PRINT ADJUST]
If nozzles are clogged even after the cleaning function is executed
[FILL UP INK]
[HEAD WASH]
Drawing setup conditions [LIST]
Plotting HEX CODE [DATA DUMP]
Wiper Life warning [WIPE LEVEL]
When charging ink different from the one in use [INKCHANGE]
2 types of ink are filled at the same time (The 2 way function)
Setting time [TIME SET]
Displaying device information [INFORMATION]
CHAPTER 6 When abnormal conditions are encountered
Before taking a phenomenon as a sign of failure
If an image failure occurs
Ink cartridge trouble
Troubles for which error messages are given on the LCD
Warning error
Error messages
APPENDIX
Basic specifications
Specification for ink
Moving the device
Position of the warning level
Function Flowchart
OPERATION MANUAL
MIMAKI ENGINEERING CO., LTD.
TKB Gotenyama Building, 5-9-41, Kitashinagawa, Shinagawa-ku, Tokyo 141-0001, Japan
Phone: +81-3-5420-8671 Fax: +81-3-5420-8687
URL: http: // www.mimaki. co. jp /
E-mail: trading@mimaki.jp
D200861-12
CAUTION
MIMAKI ENGINEERING CO., LTD. shall have no liability for any damage of any kind
(including but not limited to unearned profits, indirect damages, special losses and other
debts) caused by the use of malfunction of the product unless otherwise specified in
MIMAKI warranty provisions. The same applies to any case where MIMAKI ENGINEER-
ING CO., LTD. has been informed of the possible risk of such damages in prior.
For example, MIMAKI shall not be liable to any damage to medium (works) due to the use of
the product or any indirect damage that is caused by a product that is manufactured with
damaged medium.
Please be noted that MIMAKI ENGINEERING CO., LTD. shall have no liability for any
debts, unearned profits and any claims from any third party resulting from the use of the
device.
Requests
• This Operation manual has been carefully prepared for your easy understanding, how-
ever, please do not hesitate to contact a distributor in your district or our office if you have
any inquiry.
• Description contained in this Operation manual are subject to change without notice for
improvement.
• Generally, names and designations referred to in this Operation manual are trade marks or
registered trade marks of the manufacturers or suppliers.
Reproduction of this manual is strictly prohibited.
All Rights Reserved. Copyright © 2008 MIMAKI ENGINEERING Co., Ltd.
FCC Statement (USA)
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the Operation manual, may cause harmful interference
to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which cause the user will be required to correct the interference at his own expense.
•
In the case where MIMAKI-recommended cable is not used for
connection of this device, limits provided by FCC rules can be
exceeded.
To prevent this, use of MIMAKI-recommended cable is essential
for the connection of this device.
Interference to televisions and radios
The product described in this manual generates high frequency when operating.
The product can interfere with radios and televisions if set up or commissioned under
improper conditions. The product is not guaranteed against any damage to specific-
purpose radio and televisions.
The product’s interference with your radio or television will be checked by turning on/off
the power switch of the product.
In the event that the product is the cause of interference, try to eliminate it by taking one of
the following corrective measures or taking some of them in combination.
• Change the orientation of the antenna of the television set or radio to find a position
without reception difficulty.
• Separate the television set or radio from this product.
• Plug the power cord of this product into an outlet which is isolated from power circuits
connected to the television set or radio.
Foreword
Congratulations on your purchase of a MIMAKI "GP-604" model of color ink jet plotter.
The GP-604 is designed for printing directly on T-shirts using special printing pigment ink.
The flat-bed construction means it can also print on garment other than T-shirts.
Read this Operation manual carefully and make the most effective use of your plotter.
On This Operation manual
• Please read and fully understand this Operation manual before putting the machine into
service. It is also necessary to keep this Operation manual on hand.
• Make arrangements to deliver this Operation manual to the person in charge of the opera-
tion of this device.
• This Operation manual has been carefully prepared for your easy understanding, however,
please do not hesitate to contact a distributor in your district or our office if you have any
inquiry.
• Description contained in this Operation manual are subject to change without notice for
improvement.
•
In the case where this Operation manual should be illegible due to destruction or lost by fire
or breakage, purchase another copy of the Operation manual from our office.
- i -
Features
The features of the device are described below.
Pigment ink can be used
The device is designed for printing directly on T-shirts and other media using printing pigment ink of
high light stability. The ink does not require special preparation of the medium. Heat treatment
(simple postprint treatment) ensures a smooth finish.
Four-head, four-color, double-cartridge ink station
Two ink cartridges of the same color can be set in each head (four colors in all) for fast and high-
quality printing.
* Only when 2 way function is not used
Easy ink replacement
The ink cartridge can be replaced safely and easily without getting your hands dirty.
Indication of the INK remains
Since the amount of ink that remains can be checked even during operation of the device, you can use
the ink and medium without waste.
Printing heater mounting
The device detects the ambient temperature to perform temperature control, allowing heating tem-
perature setup which best suits the garment used.
It works on preserving the colors of inks and preventing from setting off of inks.
Simple display
The LCD panel displays the device setting menu in two lines (not one line), making it easier to see.
Since the LCD panel is provided with a backlight, the display can be clearly seen even in a dark place.
The LCD panel can display seven different languages for each, including English and Spanish.
High-speed interface
The "IEEE-1394" interface allows for high-speed data reception from the computer.
The 2 way function can be used
By setting TP ink and Sb51 ink and selecting the ink to be used, you may draw the images without
need for exchanging the ink cartridge.
- ii -
For safe operation
Pictorial signs
Pictorial signs are used in this Operation manual for safe operation of and in prevention of damages to
the device. Pictorial signs and their meanings are given below. Read and fully understand before
reading the text.
•
Indicates the case where it is assumed that misuse of the machine, ignoring this
sign, as this may cause fire or poisoning. Be sure to read this manual for proper
operation.
•
Indicates the case where it is assumed that misuse of the machine, ignoring this
sign, can cause damage only to property.
• The symbol "
" indicates helpful information that will facilitate the use of the
device.
•
Indicates the reference page for related contents.
Example of pictorial signs
• The symbol "
" indicates the case where some phenomenon that requires a
CAUTION sign (including "DANGER" and "WARNING" signs) exists. A concrete
precaution (precaution against an electric shock in the
case of the sketch given
on the left) is shown in the illustration.
• The symbol "
" indicates a prohibited behavior. A concrete illustration of prohibi-
tion (disassembly is prohibited in the sketch given on the left) is shown in or next
to the illustration.
• The symbol "
" indicates a thing that is forced to be done and instruction that is
forced to be followed. A concrete illustration of instruction (the removal of a plug
from the receptacle is instructed in the sketch given on the left) is drawn in the
illustration.
- iii -
WARNING
•
If anyone drinks ink in mistake, keep him or her quiet and see a doctor immedi-
ately. Do not allow him or her drink vomit. Then, contact the Poison Control
Center.
•
If you absorb a lot of vapor and feel bad, immediately move to a location where
fresh air is present and then keep yourself warm and quiet. Then, consult a doctor
as soon as possible.
• The ink contains a trace of substance classified as “harmful”.
If ink settles on the skin or clothes, immediately wash it off with detergent or water.
If you get ink in your eyes, immediately wash your eyes with a lot of clean water
for at least 15 minutes. In this case, also wash the backside of eyelids to rinse ink
away completely. Then, consult a doctor as soon as possible.
• You cannot use any other ink type than the exclusive one.
• Store ink cartridges and waste ink tank in a place that is out of the reach of chil-
dren.
• Never refill the ink cartridge with ink.
MIMAKI assumes no responsibility for malfunction caused by using the device
after replenishment of ink.
• Never disassemble or remodel the ink cartridge. Disassembling will result in
electric shocks or breakdown of the device.
• Dispose the waste ink according to the local regulations.
- iv -
相关推荐
2023年江西萍乡中考道德与法治真题及答案.doc
2012年重庆南川中考生物真题及答案.doc
2013年江西师范大学地理学综合及文艺理论基础考研真题.doc
2020年四川甘孜小升初语文真题及答案I卷.doc
2020年注册岩土工程师专业基础考试真题及答案.doc
2023-2024学年福建省厦门市九年级上学期数学月考试题及答案.doc
2021-2022学年辽宁省沈阳市大东区九年级上学期语文期末试题及答案.doc
2022-2023学年北京东城区初三第一学期物理期末试卷及答案.doc
2018上半年江西教师资格初中地理学科知识与教学能力真题及答案.doc
2012年河北国家公务员申论考试真题及答案-省级.doc
2020-2021学年江苏省扬州市江都区邵樊片九年级上学期数学第一次质量检测试题及答案.doc
2022下半年黑龙江教师资格证中学综合素质真题及答案.doc
