TABLE OF CONTENTS
Foreword
On This Operation manual
Features
For safe operation
Pictorial signs
Example of pictorial signs
Never Do the Following
Precautions in installation
Precautions in use
How to read this operation manual
Display on the LCD and Indication of the Keys
Structure of this Operation manual
CHAPTER 1 Name and Function of each section
The Front
The Rear
Operation Panel
Carriage
Capping station
Heater
Setting the heater voltage
Ink station
Initial filling of ink
MENU mode
CHAPTER 2 Operation
Operation
Switching on the power supply
Turning the power on
Filling of discharge liquid at the time of starting works
Front cover
Opening/closing the front cover
If opened the front cover during plotting...
Adjusting the suitable temperature of heater
Checking and solving nozzle clogging
Print the test pattern
If printed abnormal pattern
Setting Garment (T-shirt)
Set the area plate
Remove the area plate
Read the thickness of the garment (T-shirt)
Plotting an Image from source data
Perform the printing ( Same operations both for color printing and discharging )
Interrupting the plotting operation
When the message [ERROR71 WORK TOO HIGH] is displayed ...
Heat with a press
To replenish ink, set a new ink cartridge in the ink station
Filling of Cleaner at the end of the works
Turning the power off
CHAPTER 3 Daily cleaning
Daily Maintenance
Notes on cleaning
If the frame components of the device/table/T-shirt plate have stained
Cleaning the wiper and ink caps
When the waste ink tank becomes full
CHAPTER 4 Setting Function
Basic operations of menus
Register the function on each purpose (Type Registration)
Registering a type
Changing the type
Setup functions
Effective Plotting Area
Set the print area
Set the ORIGIN
Change the head height (the head-gap)
Correcting the garment feed rate [FEED COMP.]
Change the Language on LCD
CHAPTER 5 Maintenance
Maintenance of the device
Invoking a maintenance function
Setup functions
Cleaning the station interior [STATION]-[CARRIAGEout]
When the message [REPLACE WIPER] is displayed [STATION]-[WIPER EXCHANGE]
Adjusting between the two plotting directions [PRINT ADJUST]
If nozzles are clogged even after the cleaning function is executed
Cleaning the nozzle [NOZZLE WASH]
[FILL UP INK]
Wash the color head with cleaning fluid [HEAD WASH]
Wash the discahrge head with cleaning fluid [HEAD WASH]
Ink discharge way cleaning [Disway WASH]
When not in use the plotter over the long term [CUSTODYwash]
Drawing setup conditions [LIST]
Plotting HEX CODE [DATA DUMP]
Wiper Life warning [WIPE LEVEL]
Setting time [TIME SET]
Displaying device information [INFORMATION]
CHAPTER 6 When abnormal conditions are encountered
Before taking a phenomenon as a sign of failure
The device cannot be energized
The device cannot perform printing
The device cannot perform printing after data transmission.
The [HEAT] or [CONSTANT] indicator does not go on
If an image failure occurs
White lines/thin spots obvious or dark stripes occur (In the direction of travel of the head)
Displacement is observed between outward and inward printing
Ink does not properly overlap
Ink drops on the garment during plotting
Ink beadings occur
Splotch the outside of the effective plotting area
Difference in color appearance
Ink cartridge trouble
Troubles for which error messages are given on the LCD
Warning error
Error messages
APPENDIX
Basic specifications
Specification for ink
Specification for cleaner and discharge liquid
Moving the device
Position of the warning level
Operation Flow