Fi-486PRRE(Fi-486PRRE_User).pdf

发布时间：2022-05-06 发布人：admin 分类：养殖资料大小：4.96M 资料格式：pdf 举报版权申诉

第1页 / 共93页

第2页 / 共93页

第3页 / 共93页

第4页 / 共93页

第5页 / 共93页

第6页 / 共93页

第7页 / 共93页

第8页 / 共93页

INTRODUCTION

CONTENTS

1 PREPARATIONS

1.1 Checking the Contents of the Imprinter Package

1.2 Outer View

2 BASIC OPERATIONS

2.1 Installing the Print Cartridge

2.2 Adjusting Print Position

2.3 Setting Imprinter

3 DAILY CARE

4 REPLACING PRINT CARTRIDGE

4.1 Replacing the Print Cartridge

4.2 Reset the remaining ink counter of imprinter

5 PRECAUTION

6 ERROR MESSAGES

7 SPECIFICATIONS

P3PC-E387-02XA fi-486PRRE Imprinter Operator’s Guide Operator’s Guide English Japanese

fi-486PRRE Imprinter Operator’s Guide Operator’s Guide English

Thank you for purchasing the fi-486PRRE Imprinter. The fi-486PRRE is the fi-4860C image scanner option. The fi-486PRFR and the fi-486PRRE can be installed in the fi-4860C image scanner together.However, they cannot be used at a time.Either fi-486PRRE or fi-486PRFR can be used during scanning. The fi-486PRRE installation should be done by a trained service engi- ATTENTION neer. fi-486PRRE The fi-486PRRE prints on the front side of documents. Printing is done prior to scanning a document and the printed characters are scanned and included in the scanned image. About this manual The contents of this manual are as follows. 1. PREPARATIONS This chapter explains the contents of the imprinter package and the part names. 2. BASIC OPERATIONS This chapter describes how to use the imprinters. 3. DAILY CARE This chapter describes how to clean the imprinter and the related area of the scanner. 4. REPLACING PRINT CARTRIDGE This chapter explains how to replace the Print cartridge and reset the Ink remain counter. 5. PRECAUTION This chapter explains important details for ensuring the correct use of the products.INTRODUCTIONi

6. ERROR MESSAGES This chapter explains the error messages and the recovery process. 7. SPECIFICATIONS This chapter describes the specifications of the fi-486PRRE imprinter option. This manual provides necessary information to make the best use of the fi-486PRRE. August, 2002ii

■ Revisions FCC declaration This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly CAUTION approved by the party responsible for compli- ance could void the user’s authority to operate the equipment. • The use of a shielded interface cable is ATTENTION required to comply with the Class A limits of Part 15 of FCC rules. The length of the SCSI interface cable must be 1.5 meters (5 feet) or less. • The length of the AC cable must be 3 meters (10 feet) or less. Canadian DOC Regulations This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. Le pésent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescridtes dans le Réglesment sur le brouillage radioélectrique dicté par le ministere des Communications du Canada. Cet appareil numérique de la classe A est conformme à la norme NMB-003 du Canada.iii

International ENERGY STAR® Program As an ENERGY STAR® Partner, PFU LIMITED has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the penetration of energy efficient computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos ( ) are uniform among participating nations. Use in High-safety Applications This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications. It has not been designed and manufactured for use in applications (simply called "high-safety applications" from here on) that directly involve serious danger to life and health when an extremely high degree of safety is required, for example, in the control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air traffic control, operation control in mass-transport systems, medical equipment for sustaining life, and missile firing control in weapons systems, and when provisionally the safety in question is not ensured. The user should use this product without adopting measures for ensuring safety in such high- safety applications. PFU LIMITED assumes no liability whatsoever for damages arising from use of this product by the user in high-safety applications, and for any claims or compensation for damages by the user or a third party. All Rights Reserved, Copyright© PFU LIMITED 2002.iv

分享到：

赞收藏

资料库

Fi-486PRRE(Fi-486PRRE_User).pdf

相关推荐

扫描仪

热门标签

最新资料