DIGITAL VIDEO CAMERA
GR-DVL307
GR-DVL300
GR-DVL107
GR-DVL100
Please visit our Homepage on the World Wide
Web and answer our Consumer Survey
(in English only):
http://www.jvc-victor.co.jp/english/index-e.html
The camcorder illustrations
appearing in this instruction
manual are of the GR-DVL307.
INSTRUCTIONS
ENGLISH
CONTENTS
AUTOMATIC DEMONSTRATION 5
6 – 11
GETTING STARTED
12 – 28
RECORDING
Basic Recording ................................. 12
Advanced Features ............................ 19
29 – 35
PLAYBACK
Basic Playback .................................. 29
Advanced Features ............................ 30
Basic Connections .............................. 32
Advanced Connections ......................... 34
36 – 38
DUBBING
Dubbing To A VCR ............................. 36
Dubbing To A Video Unit
Equipped With A DV Connector ............ 37
Dubbing From A Video Unit Equipped
With A DV Connector ........................ 38
39 – 49
USING THE REMOTE
CONTROL UNIT
Slow-Motion Playback, Frame-By-Frame
Playback and Playback Zoom .............. 41
Playback Special Effects ...................... 42
Random Assemble Editing .................... 43
For More Accurate Editing .................... 47
Audio Dubbing .................................. 49
50 – 56
TROUBLESHOOTING
57 – 61
INDEX
Indications ...................................... 57
Controls, Connectors And Indicators ........ 60
USER MAINTENANCE
CAUTIONS
TERMS
SPECIFICATIONS
62
63 – 65
66 – 67
68 – 69
LYT0574-001A EN
2 EN
Dear Customer,
Thank you for purchasing this digital video camera. Before use, please read the safety information and
precautions contained in the following pages to ensure safe use of this product.
Using This Instruction Manual
•All major sections and subsections are listed in the Table Of Contents on the cover page.
•Notes appear after most subsections. Be sure to read these as well.
•Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
.... refer to the Index (墌 pgs. 57 – 61) and familiarize yourself with button locations, etc. before use.
.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe
use of this product.
You are recommended to carefully read the cautions on pages 63 – 65 before use.
SAFETY PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTIONS:
䡲 To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified
personnel.
䡲 When you are not using the AC Power Adapter/Charger for a long period of time, it is recommended that
you disconnect the power cord from AC outlet.
NOTES:
●The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main
unit.
●The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom.
This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for
playback with a television of a different standard. However, live recording and LCD monitor/viewfinder
playback are possible anywhere. Use the BN-V408U/V416U/V428U battery packs and, to recharge them,
the provided multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be
necessary to accommodate different designs of AC outlets in different countries.)
EN3
When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all
sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).
Do not block the ventilation holes.
(If the ventilation holes are blocked by a newspaper, or cloth etc. heat may not be able to get out.)
No naked flame sources, such as lighted candles, should be placed on the apparatus.
When discarding batteries, environmental problems must be considered and local rules or laws governing
the disposal of these batteries must be followed strictly.
The apparatus shall not be exposed to dripping or splashing.
Do not use this equipment in a bathroom or places with water.
Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases,
potted plants, cups etc.) on top of this unit.
(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)
Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to
the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.
CAUTION!
The following notes concern possible physical damage to the camcorder and to the user.
When carrying, be sure to always securely attach and use the provided shoulder strap. Carrying or
holding the camcorder by the viewfinder and/or the LCD monitor can result in dropping the unit, or in a
malfunction.
Take care not to get your finger caught in the cassette holder cover. Do not let children operate the
camcorder, as they are particularly susceptible to this type of injury.
Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the
camcorder.
CAUTION!
Connecting cables (Audio/Video, S-Video, Editing, DC, etc.) to the camcorder and leaving the unit on top
of the TV is not recommended, as tripping on the cables will cause the camcorder to fall, resulting in
damage.
䡲 This camcorder is designed exclusively for the digital video cassette. Only cassettes marked
can be used with this unit.
Before recording an important scene . . .
.... make sure you only use cassettes with the Mini DV mark
.... remember that this camcorder is not compatible with other digital video formats.
.... remember that this camcorder is intended for private consumer use only. Any commercial use without
.
proper permission is prohibited. (Even if you record an event such as a show, performance or exhibition for
personal enjoyment, it is strongly recommended that you obtain permission beforehand.)
4 EN
PROVIDED ACCESSORIES
•AC Power Adapter/
Charger AA-V40EG
•Remote
Control Unit
RM-V716U
•Battery Pack
BN-V408U
•Cable Adapter
•AAA (R03) Battery
x 2 (for remote
control unit)
•Lens Cap
(Already attached
to the camcorder)
•Editing Cable
GR-DVL307/DVL300:
One plug has 3 rings around
the pin, and the other has
1 ring around the pin.
GR-DVL107/DVL100:
Both plugs have 1 ring
around the pin.
•Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
•Core Filter x 2
(GR-DVL107/DVL100 only)
(for optional S-Video cable
and PC Connection cable
provided with optional
HS-V14KIT software)
•PC Connection Cable
(GR-DVL307/DVL300 only)
•DC Cord
•DV Cable
(GR-DVL307/DVL107 only)
•Core Filter x 1
(GR-DVL307/DVL300 only)
(for optional S-Video cable)
•Shoulder Strap
•CD-ROM
(GR-DVL307/DVL300 only)
The CD ROM contains the
following 2 software
programmes:
• JLIP Video Capture
• JLIP Video Producer
How To Attach The Core Filter
Attach the provided Core Filter to an optional S-Video cable or the PC connection cable provided with
optional HS-V14KIT software (GR-DVL107/DVL100 only). The Core Filter reduces interference.
1
2
3 cm
3
EN5
Stopper
Release the
stoppers on both
ends of the Core
Filter.
Wind once
Run the cable through the Core Filter, leaving approx.
3 cm of cable between the cable plug and the Core
Filter. Wind the cable once around the outside of the
Core Filter as shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
䡲 When connecting cables, attach the end with the Core Filter to the camcorder.
Close the Core Filter until it
clicks shut.
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when
“DEMO. MODE” is set to “ON” (factory-preset).
䡲 Available when the Power Switch is set to “
” or “
and no cassette is in the camcorder.
MENU/BRIGHT Wheel
”
䡲 Performing any operation during the demonstration stops
the demonstration temporarily. If no operation is per-
formed for more than 1 minute after that, the demonstra-
tion will resume.
䡲 “DEMO. MODE” remains “ON” even if the camcorder
power is turned off.
䡲 To cancel Automatic Demonstration, set the Power
”, then press MENU/BRIGHT while the
Switch to “
demo is in progress. This takes you directly to the demo
mode’s Setting Menu (so you will not have to go through
the Menu Screen). Rotate MENU/BRIGHT to select
“OFF” and press it. The normal screen appears.
C
T
A
U
M
D
R
E
M
N
R
E
D
O
O
M
ME
N
U
E
A
D
E
C
U
O
I
L
R
1
R
E
S
O
N
O
Z
M
A
G
N
T
A
L
I
D
N
D
E
M
O
S
I
E
D
U
P
Y
B
M
U
O
M
.
E
L
E
D
D
R
E
O
O
N
F
F
GR-DVL307/DVL300 only
6 EN
Battery pack
BN-V408U,
BN-V416U or
BN-V428U
To AC outlet
POWER
indicator
AC Power
Adapter/Charger
DC OUT connector
CHARGE indicator
Battery pack
Fully charging time
BN-V408U
approx. 1 hr. 30 min.
BN-V416U (optional)
approx. 2 hrs.
BN-V428U (optional)
approx. 3 hrs. 20 min.
GETTING STARTED
Power
This camcorder’s 2-way power supply system lets you
choose the most appropriate source of power. Do not use
provided power supply units with other equipment.
CHARGING THE BATTERY PACK
1 Make sure you unplug the camcorder’s DC cord from
the AC Power Adapter/Charger. Plug the AC Adapter/
Charger’s power cord into an AC outlet. The POWER
indicator lights.
2 Attach the battery pack with the
with the corresponding marks on the AC Power
Adapter/Charger. The CHARGE Indicator begins
blinking to indicate charging has started.
mark aligned
3 When the CHARGE indicator stops blinking but stays
lit, charging is finished. Slide the battery and lift off.
Remember to unplug the AC Adapter/Charger’s
power cord from the AC outlet.
NOTES:
● If the protective cap is attached to the battery pack, remove it first.
● Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature
range for charging. If the environment is too cold, charging may be incomplete.
● Charging times noted above are for a fully discharged battery pack.
● Charging time varies according to the ambient temperature and the status of the battery pack.
● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
● If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the
● Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to
camcorder and charging stops.
use it only in well-ventilated areas.
● When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may
not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.
● If the battery operation time remains extremely short even after having been fully charged, the battery is
worn out and needs to be replaced. Please purchase a new one.
Lithium-ion is vulnerable in colder
temperatures.
About Batteries
DANGER! Do not attempt to take the batteries apart, or
expose them to flame or excessive heat, as it may cause a fire
or explosion.
WARNING! Do not allow the battery or its terminals to come
in contact with metals, as this can result in a short circuit and
possibly start a fire.
The Benefits Of Lithium-Ion Batteries
Lithium-ion battery packs are small but have a large power
capacity. However, when one is exposed to cold temperatures
(below 10°C), its usage time becomes shorter and it may cease
to function. If this happens, place the battery pack in your
pocket or other warm, protected place for a short time, then
re-attach it to the camcorder. As long as the battery pack itself
is not cold, it should not affect performance.
(If you’re using a heating pad, make sure the battery pack does
not come in direct contact with it.)
BATTERY RELEASE
Button
1
3
2
ATTENTION:
Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.
INFORMATION:
VU-V856KIT is a set composed of the
BN-V856U battery pack and AA-V80EG AC
Power Adapter/Charger. Read the VU-V856KIT’s
instruction manuals before using.
It is impossible to charge the BN-V856U battery
pack using the provided AC Power Adapter/
Charger. Use the optional AA-V80EG AC Power
Adapter/Charger.
USING THE BATTERY PACK
EN7
1 Tilt the viewfinder upward 1.
2 With the arrow on the battery pack pointing
downward, push the battery pack slightly against the
battery pack mount 2, then slide down the battery
pack until it locks in place 3.
•If the battery pack is attached with its
mark set
in the wrong direction, a malfunction may occur.
To Detach The Battery Pack . . .
.... tilt the viewfinder upward 1 and slide the battery pack
up slightly while pressing BATTERY RELEASE to detach it.
Approximate recording time
Battery pack
LCD monitor on/
Viewfinder off
BN-V408U
BN-V416U
(optional)
BN-V428U
(optional)
BN-V856U
(optional)
1 hr.
(35 min.)
2 hrs.
(1 hr. 10 min.)
3 hrs. 30 min.
(2 hrs.)
7 hrs.
(4 hrs.)
LCD monitor off/
Viewfinder on
1 hr. 15 min.
(40 min.)
2 hrs. 30 min.
(1 hr. 20 min.)
4 hrs. 20 min.
(2 hrs. 20 min.)
8 hrs. 40 min.
(4 hrs. 40 min.)
( ) : when the video light is on.
NOTES:
● Recording time is reduced significantly under the
following conditions:
•Zoom or Record-Standby mode is engaged repeatedly.
•The LCD monitor is used repeatedly.
•The playback mode is engaged repeatedly.
● Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.
USING AC POWER
Use the AC Power Adapter/Charger (connect as shown in the illustration).
NOTES:
● The provided AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to
● For other notes, 墌 pg. 6.
240 V.
To AC outlet
Power cord
AC Power
Adapter/Charger
To DC Input
connector
To DC OUT
connector
DC cord
8 EN
Power
Zoom Lever
Recording
Start/Stop button
Power Switch
Dioptre
Adjustment
Control
PAUSE
2
1
3
GETTING STARTED (cont.)
Grip Adjustment
1 Separate the Velcro strip.
2 Pass your right hand through the loop and grasp
3 Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and
Power Zoom Lever. Refasten the Velcro strip.
the grip.
Viewfinder Adjustment
1 Set the Power Switch to “
2 Turn the Dioptre Adjustment Control until the
pressing down the Lock Button located on the
switch.
indications in the viewfinder are clearly
focused.
” or “
” while
Shoulder Strap Attachment
1 Make sure the battery pack or DC cord is
removed. Following the illustration, thread the
strap through the eyelet 1, then fold it back and
thread it through the buckle 2. Repeat the
procedure to attach the other end of the strap to
the other eyelet 3 located under the Grip Strap,
making sure the strap is not twisted.
Tripod Mounting
1 Align the screw and camera direction stud on
the tripod with the camera’s mounting socket
and stud hole. Then tighten the screw.
•Some tripods are not equipped with studs.
CAUTION:
When using a tripod, be sure to open and
extend its legs fully to stabilise the
camcorder. To prevent damage to the unit
caused by falling over, do not use a small-
sized tripod.