2. Specification
2-1. GSM & WCDMA & CDMA2000 General Specification
EGSM 900
Phase 2
DCS1800
Phase 1
PCS1900
WCDMA2100
(Band Ⅰ)
WCDMA1900
(Band Ⅱ)
880~915
925~960
1710~1785
1805~1880
1850~1910
1930~1990
1920~1980
2110~2170
1850~1910
1930~1990
0~124 &
975~1023
512~885
512~810
UL:9612~9888
DL:10562~10838
UL:9262~9538
DL:9662~9938
45MHz
95MHz
80MHz
190MHz
80MHz
270.833kbps
270.833kbps
3.692us
3.692us
270.833kbps
3.692us
3.84Mcps
3.84Mcps
576.9us
4.615ms
576.9us
4.615ms
576.9us
4.615ms
FrameLength:
FrameLength:
10ms
Slotlength:
0.667ms
10ms
Slotlength:
0.667ms
Freq.
Band[MHz]
Uplink/Downl
ink
ARFCN
range
Tx/Rx
spacing
Mod. Bit
rate/
Bit Period
Time Slot
Period/Fram
e Period
Modulation
0.3GMSK
0.3GMSK
0.3GMSK
QPSK ,HPSK
QPSK,HPSK
MS Power
33dBm~5dBm
30dBm~0dBm
30dBm~0dBm
24dBm~-50dBm
24dBm~-50dBm
Power Class
4
1
1
3
3
Sensitivity
-102dBm
-100dBm
-100dBm
-106.7dBm
-106.7dBm
TDMA Mux
8
8
8
/
/
Cell Radius
35Km
2Km
2Km
2Km
2Km
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
2-1
Specification
2-1. GSM & WCDMA & CDMA2000 General Specification
Freq.
Band[MHz]
Uplink/Downlink
ARFCN range
WCDMA850
(Band Ⅴ)
824~849
869~894
UL:4132~4233
DL:4357~4458
C D M A 2 00 0 B C 0
824~849
869~894
991~1023,1~779
Tx/Rx spacing
45MHz
45MHz
Mod. Bit
rate/
Bit Period
3.84Mcps
1.2288Mcps
Time Slot Period/Frame
Period
FrameLength:
10ms
Slotlength:
0.667ms
/
Modulation
QPSK ,HQPSK
QPSK
MS Power
Power Class
24dBm~
-50dBm
3
25.5dBm~
-50dBm
3
Sensitivity
-106.7dBm
-104dBm
TDMA Mux
Cell Radius
/
/
/
2Km
2-2
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
Specification
2-2. GSM Tx Power Class
TX Power
control level
EGSM900
TX Power
control level
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
33±2 dBm
31±3 dBm
29±3 dBm
27±3 dBm
25±3 dBm
23±3 dBm
21±3 dBm
19±3 dBm
17±3 dBm
15±3 dBm
13±3 dBm
11±5 dBm
9±5dBm
7±5 dBm
5±5 dBm
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DCS1800
30±2 dBm
28±3 dBm
26±3 dBm
24±3 dBm
22±3 dBm
20±3 dBm
18±3 dBm
16±3 dBm
14±3 dBm
12±4 dBm
10±4 dBm
8±4 dBm
6±4 dBm
4±4 dBm
2±5 dBm
0±5 dBm
TX Power
control level
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PCS1900
30±2 dBm
28±3 dBm
26±3 dBm
24±3 dBm
22±3 dBm
20±3 dBm
18±3 dBm
16±3 dBm
14±3 dBm
12±4 dBm
10±4 dBm
8±4 dBm
6±4 dBm
4±4 dBm
2±5 dBm
0±5 dBm
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
2-3
3. Operation Instruction and Installation
Main Function
• Android OS: Kitkat 4.4.4
• Qualcomm MSM8939 (1.5 Ghz)
• 2G GSM (900/1800/1900)
• 2G CDMA (850)
• 3G CDMA (850)
• 3G WCDMA (2100/1900/850)
• LTE FDD Band 1, 3,
• LTE TDD Band 41
• 2GB RAM + 16GB eMMC
• 13.0 MP Main CAM + 5.0 MP Sub CAM
• 5.5" 1920X1080 FHD OLED
• A-GPS / BT 4.0 / USB v2.0 / WiFi (802.11 b/g/a/n)
• 2600 mAh Battery
• Sensors: Accelerometer,Hall sensor,Light Sensor, Proximity Sensor,RGB sensor
• Additional :
- Samsung Wearable Device Support
- Battery 2600 mAh
- Charger 5V/1.55A
- Danta Link Cable 3.3PI, 1m
- Ear Phone 3.5PI, 4Pin
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
3-1
9. Reference Abbreviate
Reference Abbreviate
― AAC: Advanced Audio Coding.
― AVC : Advanced Video Coding.
― BER : Bit Error Rate
― BPSK: Binary Phase Shift Keying
― CA : Conditional Access
― CDM : Code Division Multiplexing
― C/I : Carrier to Interference
― DMB : Digital Multimedia Broadcasting
― EN : European Standard
― ES : Elementary Stream
― ETSI: European Telecommunications Standards Institute
― MPEG: Moving Picture Experts Group
― PN : Pseudo-random Noise
― PS : Pilot Symbol
― QPSK: Quadrature Phase Shift Keying
― RS : Reed-Solomon
― SI
― TDM : Time Division Multiplexing
― TS : Transport Stream
: Service Information
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
9-1
1. Safety Precautions
1-1. Repair Precaution
Before attempting any repair or detailed tuning, shield the device from RF noise or static
electricity discharges.
Use only demagnetized tools that are specifically designed for small electronic repairs,
as most electronic parts are sensitive to electromagnetic forces.
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can
easily damage the heads of screws.
Use only conductor wire of the properly gauge and insulation for low resistance, because of
the low margin of error of most testing equipment.
We recommend 22-gauge twisted copper wire.
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily
damaged, even with relatively low heat. Never use a soldering iron with a power rating of
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F).
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected.
Always use the replacement parts that are registered in the SEC system. Third-party replac
ement parts may not function properly.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1-1
Safety Precautions
1-2. ESD(Electrostatically Sensitive Devices) Precaution
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discha
rge and can be easily damaged by it. We recommend protecting these components with cond
uctive anti-static bags when you store or transport them.
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate
static electricity from your body before repairing ESDs.
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are
properly connected.
Use only desoldering tools with plastic tips to prevent static discharge.
Properly shield the work environment from accidental electrostatic discharge before opening
packages containing ESDs.
The potential for static electricity discharge may be increased in low humidity environments,
such as air-conditioned rooms. Increase the airflow to the working area to decrease the
chance of accidental static electricity discharges.
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
1-2
6. Level 1 Repair
6-1. S/W installation
6-1-1. Required items in order to install S/W
Installation program: Downloader Program (Odin3 v3.09.exe with odin3.ini)
SM-A7009 Mobile Phone
Data Cable (GH39-01578K)
• JIG BOX (GH81-11888A)
• RF Test Cable
• JIG Cable (GH81-10621A)
• Adapter (GH81-11888K)
• Serial Cable
Mobile device specific S/W: Binary files
※ Settings
Connect ANYWAY JIG BOX
with JIG CABLE (Phone to JIG)
or PC to Phone Using Data Cable
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
6-1