第1页 / 共300页
第2页 / 共300页
第3页 / 共300页
第4页 / 共300页
第5页 / 共300页
第6页 / 共300页
第7页 / 共300页
第8页 / 共300页
Printronix打印机-SLPA7000r说明书.pdf
Table Of Contents
1 Introduction
Printronix Customer Support Center
Printronix Supplies Department
Corporate Offices
Warnings And Special Information
Manual Conventions
The SLPA8000/7000r Series
Standard Features
Optional Features
Thermal Printer Media
Ribbons
Thermal Printer Technology
Overview
General Operation
Operating Specifications
Storage, Shipping, & Handling
Safety
Warnings And Cautions
Operating Precautions
Operational Safety
Installing The SLPA
Unpacking Your SLPA
Mounting The SLPA
Optional Mounting Accessories
Mounting The Beacon
Air, Power, And Communications Connections
Adjusting The Voltage
Constructing The GPIO Cable Assembly
2 Operation
Control Panel
LCD
Keypad
Key and Indicator Descriptions
Pneumatic Control Valves And Gauges
Setup
Threading The Label Roll
Loading Ribbon
Positioning The Air Jets
Removing Label Backing
SLPA System Configuration Parameters
System Adjustments
Printhead Pressure Adjustment
Printhead Pressure Block Adjustments
Positioning The Media Sensors
Sensing Different Media Types
Calibrating The Media Sensors
Printing And Applying Labels
Label Application (Positioning) Adjustments
Adjusting The Cylinder Extend Time
The Print And Apply Process
3 Configuring The SLPA
Overview
Setting SLPA Configuration Parameters
Moving Within The Configuration Menu
Selecting A Menu Option
Changing SLPA Settings
Saving A Configuration
Auto Save Configuration
Specifying A Power-Up Configuration
Modifying A Saved Configuration
Printing A Configuration
Loading A Saved Configuration
Main Menu
QUICK SETUP Menu
QUICK SETUP Submenus
CONFIG. CONTROL Menu
CONFIG. CONTROL Submenus
MEDIA CONTROL Menu
MEDIA CONTROL Submenus
CALIBRATE CTRL Menu
CALIBRATE CTRL Submenus
PRINTER CONTROL Menu
PRINTER CONTROL Submenus
IGP/PGL SETUP Menu
IPG/PGL Setup Submenus
DIAGNOSTICS Menu
DIAGNOSTICS Submenus
PARALLEL PORT Menu
PARALLEL PORT Submenus
SERIAL PORT Menu
SERIAL PORT Submenus
C/T PORT Menu
C/T PORT Submenus
ETHERNET ADDRESS Menu
ETHERNET ADDRESS Submenus
ETHERNET PARAMS Menu
ETHERNET PARAMS Submenus
WLAN ADDRESS Menu
WLAN ADDRESS Submenus
WLAN PARAMS Menu
WLAN PARAMS Submenus
WLAN LEAP Menu
WLAN LEAP Submenus
BATTERY CONTROL
BATTERY CONTROL Submenus
DATE Menu
DATE Submenus
Applicator Delay Menu
4 Interfaces
Overview
Auto Switching
IEEE 1284 Parallel Interface
Compatibility Mode
Nibble Mode
Byte Mode
Signals
Terminating Resistor Configurations
RS-232 Serial Interface
USB
5 Preventive Maintenance
Cleaning
General Cleaning
Cleaning The Printhead, Platen Roller And Media Sensors
Cleaning Procedure
Cleaning The Applicator Pad
Cleaning/Replacing The Vacuum Generator
Cleaning Schedule
6 Troubleshooting
Introduction
What You Should Know About Print Quality
How To Maximize Printhead Life
Troubleshooting At A Glance
How To Troubleshoot
Printer Tests
To Print A Test Label
Troubleshooting Display Messages
List Of Messages
Troubleshooting Other Symptoms
General Symptom List
A Specifications
Applicator Orientation
Product Distance Variation
Application Rate
Printing
Media
Ribbon
Electrical
Pneumatic
Environmental
Physical
Connections
Communications Interface
B Options
Beacon Package Options
Fault/Warning Beacon Package
Label On Pad Sensor
Mounting The Beacon
Mounting Accessories
U-Arm And Accessories
Mounting Stand
Low Label Sensor
Product Sensor
Application Options
Cylinder Stroke Lengths
Soft Pad
Random Stroke Sensor
C Downloading Software
Loading Flash Memory
Loading Software With The Firmware Download Utility
Loading Through The Parallel Or Serial Port Using DOS
Loading Software If Flash Contains Only Boot Code
Loading Software Through The NIC
Downloading Optional Fonts To Flash Memory
Downloading TrueType Fonts
Printronix Windows Driver
Create And Send Download File – Online (PGL Only)
Create And Send Download File – Download Mode
Using PTX_SETUP
Labeling Applications
Using Downloaded TrueType Fonts
Numerics
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Index
User’s Manual
SLPA7000r Smart Label Printer Applicator
SLPA8000 Smart Label Printer Applicator
LPA8000 Label Printer Applicator
User’s Manual
SLPA7000r Smart Label Printer Applicator
SLPA8000 Smart Label Printer Applicator
LPA8000 Label Printer Applicator
IMPORTANT WARRANTY INFORMATION
SLPA (Smart Label Printer Applicator) WARRANTY
Printronix warrants to the purchaser that under normal use and service, this SLPA (excluding the
thermal printhead) purchased hereunder shall be free from defects in material and workmanship
for a period of ninety (90) days from the date of shipment from Printronix.
Consumable items such as media and ribbons are not covered under this warranty. This warranty
does not cover equipment or parts that have been misused, altered, or used for purposes other
than those for which they were manufactured. This warranty also does not cover loss, shipping
damage, damage resulting from accident or damages resulting from unauthorized service.
THERMAL PRINTHEAD
Printronix warrants the printhead for a period of one hundred eighty (180) days, or 1,000,000 linear
inches for direct thermal use, or 2,000,000 linear inches for thermal transfer use, whichever comes
first. The warranty does not cover printheads that have been misused, damaged due to improper
cleaning, or damaged due to use of improper ribbons or media.
SUPPLIES
For the nearest Printronix full-service distributor that carries Printronix genuine supplies, please
call (800) 733-1900 or fax (714) 368-2354. Supplies design, specification, and selection are
integral to the development of any computer imaging system. Printronix's extensive manufacturing
and research capabilities, along with years of experience in the design of printers and their
applications, assures that you will receive the exact materials that you require to maximize the
performance of your Printronix SLPA. For more information, call the Printronix Customer Solutions
Center at (714) 368-2686 or access the Printronix website at http://www.printronix.com.
ON-SITE MAINTENANCE SERVICE
Printronix offers on-site support services in the United States. Please contact the Printronix
Maintenance Contracts Group at (800) 854-6463 for detailed service agreement information.
Model ____________ Setup Values
Software Version
___________________________
Touch-Blo Control
___________________________
Print Mode
Apply Mode
___________________________
___________________________
Print Darkness
___________________________
Machine Type
___________________________
Pinch Roller
___________________________
Random Stroke Delay
___________________________
Cycle Time Delay
___________________________
Cylinder Extend Time ___________________________
Vacuum Delay Time
___________________________
CPU Dip Switch Settings __________________________
SLPA Serial Number
___________________________
Communication Notices
This equipment (see Note 1, next page) has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
•
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
Increase the separation between the equipment and receiver.
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Unauthorized changes or modifications could void the userís authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Any change or modification to this product voids the userís authority to operate it per FCC Part 15
Subpart A Section 15.21 regulations.
This product contains an intentional radiator with the following parameters:
Operating Frequency: 869.525 MHz (AWID 869) or 902 to 928 MHz (AWID 915)
Typical RF Power: 25 to 100 milliwatts
Maximum RF Power: 1 Watt under abnormal conditions
Printronix SLPA8000/7000r
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Canada
This Class B digital apparatus (see Note 1, next page) complies with Canadian ICES-003 and
RSS 210.
Cet appareil numrique de la classe B est conforme ‡ la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
This device has been designed to operate with the antennas listed below, and having a maximum
gain of 18 dBi. Antennas not included in this list or having a gain greater than 18 dBi dB are
strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for
successful communication.
CE Notice (European Union)
Marking by the CE symbol indicates compliance of this Printronix system (see Note 1 below) to the
EMC Directive and the Low Voltage Directive of the European Union. Such marking is indicative
that this Printronix system meets the following technical standards:
•
EN 300 220-1 (2000), Electromagnetic Compatibility and Radio Spectrum Matters; Short
Range Devices; Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with
power levels ranging up to 500 mW.
EN 55022 ó Limits and Methods of Measurement of Radio Interference Characteristics of
Information Technology Equipment.î
EN 50082-1: 1992 ó Electromagnetic compatibilityó Generic immunity standard Part 1:
Residential, commercial, and light industry.î
EN 60950 ó Safety of Information Technology Equipment.î
•
•
•
This SLPA is a Class B product for use in a typical Class B domestic environment.
CE Symbol
Taiwan
Note 1: Does not apply to All Electric model which is a Class A certified device.
Trademark Acknowledgements
Compatibility Software Copyright © 1989 Phoenix Technologies Ltd., All Rights Reserved.
Alien and Alien Technology are registered trademarks of Alien Technology Corporation.
Code V is a trademark of Quality Micro Systems, Inc.
EIA is a registered service mark of the Electronic Industries Association.
Epson is a registered trademark of Seiko Epson Corporation.
HP is a registered trademark of Hewlett-Packard Company.
IBM is a registered trademark of International Business Machines Corporation.
IGP, LinePrinter Plus, PGL, Printronix, and PSA are registered trademarks of Printronix, Inc.
IPDS is a trademark of International Business Machines Corporation.
LaserJet is a registered trademark of Hewlett-Packard Company.
Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation.
PCL is a registered trademark of Hewlett-Packard Company.
PhoenixPage PCL 5 is a registered trademark of Phoenix Technologies Ltd.
PostScript is a registered trademark of Adobe Systems.
Proprinter is a registered trademark of International Business Machines Corporation.
QMS is a registered trademark of Quality Micro Systems, Inc.
TEC is a registered trademark of the Toshiba TEC Corporation.
Zebra is a registered trademark of Zebra Technologies Corporation.
Copyright 2004, 2008, Printronix, Inc.
相关推荐
2023年江西萍乡中考道德与法治真题及答案.doc
2012年重庆南川中考生物真题及答案.doc
2013年江西师范大学地理学综合及文艺理论基础考研真题.doc
2020年四川甘孜小升初语文真题及答案I卷.doc
2020年注册岩土工程师专业基础考试真题及答案.doc
2023-2024学年福建省厦门市九年级上学期数学月考试题及答案.doc
2021-2022学年辽宁省沈阳市大东区九年级上学期语文期末试题及答案.doc
2022-2023学年北京东城区初三第一学期物理期末试卷及答案.doc
2018上半年江西教师资格初中地理学科知识与教学能力真题及答案.doc
2012年河北国家公务员申论考试真题及答案-省级.doc
2020-2021学年江苏省扬州市江都区邵樊片九年级上学期数学第一次质量检测试题及答案.doc
2022下半年黑龙江教师资格证中学综合素质真题及答案.doc
