MODEL
UX-P200
FACSIMILE
OPERATION MANUAL
1. Installation
2. Sending Faxes
3. Receiving Faxes
4. Making Copies
5. Special Functions
6. Printing Lists
7. Maintenance
8. Troubleshooting
all.book⦆⦆Page⦆1⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
ABOUT THE TELEPHONE CONSUMER PROTECTION ACT OF 1991
"The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a
computer or other electronic device to send any message via a telephone facsimile machine
unless such message clearly contains in a margin at the top or bottom of each transmitted
page or on the first page of the transmission the following information:
(1) The date and time of transmission.
(2) Identification of either the business, business entity or individual sending the message.
(3) Telephone number of either the sending machine, business, business entity or individual.
In order to program this information into your facsimile machine, please refer to the
appropriate instructions in the operation manual."
As an ENERGY STAR partner, SHARP has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
FOR YOUR RECORDS
Please record the model number and serial number below, for easy
reference, in case of loss or theft. These numbers are located on the
rear side of the unit.Space is also provided for other relevant
information.
Model Number UX-P200
Serial Number
Date of Purchase
Place of Purchase
all.book⦆⦆Page⦆1⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
Introduction
Welcome, and thank you for
choosing a Sharp fax
machine! The features and
specifications of your new
Sharp fax are shown below.
Automatic dialing 30 numbers
Imaging film Initial starter roll (included with machine):
49 ft. (15 m) (approx. 45 letter-size pages)
Replacement roll (not included):
UX-5CR 164 ft. (50 m) (one roll yields
approx. 150 letter-size pages)
Memory size* 448 KB (approx. 24 average pages)
Modem speed 9,600 bps with automatic fallback to lower
speeds.
Transmission time* Approx. 15 seconds
Resolution Horizontal: 203 pels/inch (8 pels/mm)
Vertical:
Standard: 98 lines/inch (3.85 lines/mm)
Fine /Halftone:
196 lines/inch (7.7 lines/mm)
Super fine:
391 lines/inch (15.4 lines/mm)
Automatic document 10 pages max. (letter/A4, 20 lb paper)
feeder
Recording system Thermal transfer recording
Halftone (grayscale) 64 levels
Compression scheme MR, MH, H2
Display 16-digit LCD display
*Based on ITU-T Test Chart #1 at standard resolution is Sharp special mode, excluding
time for protocol signals (i.e., ITU-T phase C time only).
1
inbu.fm⦆⦆Page⦆2⦆⦆Thursday,⦆August⦆9,⦆2001⦆⦆10:50⦆AM
Applicable telephone line Public switched telephone network
Paper tray capacity Letter: Approx. 50 sheets (20-lb. copier paper
at room temperature; maximum stack height
should not be higher than the line on the tray)
Legal: 5 sheets
Recommended paper weight is 20-lb. Copy
Bond
Compatibility ITU-T (CCITT) G3 mode
Input document size Automatic feeding:
Width: 5.8 to 8.5" (148 to 216 mm)
Length: 5.5 to 11" (140 to 279 mm)
Manual feeding:
Width: 5.8 to 8.5" (148 to 216 mm)
Length: 5.5 to 23.6" (140 to 600 mm)
Effective scanning width 8.3" (210 mm) max.
Effective printing width 8.3" (210 mm) max.
Contrast control Automatic/Dark selectable
Reception modes TEL/FAX
Copy function Single / Multi (99 copies/page)
Telephone function Yes (cannot be used if power fails)
Power requirements 120 V AC, 60 Hz
Operating temperature 41 - 95°F (5 - 35°C)
Humidity Maximum: 85% RH
Power consumption Standby: 3.6 W
Maximum: 100 W
Dimensions (without Width: 12.9" (327 mm)
attachments) Depth: 7.6" (193 mm)
Height: 6.4" (163 mm)
Weight (without Approx. 6.2 lbs. (2.8 kg)
attachments)
As a part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
2
all.book⦆⦆Page⦆3⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
Important safety information
Do not disassemble this machine or attempt any procedures not described in this manual.
Refer all servicing to qualified service personnel.
Do not install or use the machine near water, or when you are wet. For example, do not use the
machine near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool. Take care not to spill any liquids on the machine.
Unplug the machine from the power outlet and telephone jack and consult a qualified service
representative if any of the following situations occur:
- Liquid has been spilled into the machine or the machine has been
exposed to rain or water.
- The machine produces odors, smoke, or unusual noises.
- The power cord is frayed or damaged.
- The machine has been dropped or the housing damaged.
Do not allow anything to rest on the power cord, and do not install the machine where people
may walk on the power cord.
This machine must only be connected to a 120 V, 60 Hz, grounded (3-prong) outlet.
Connecting it to any other kind of outlet will damage the machine and invalidate the warranty.
Never insert objects of any kind into slots or openings on the machine. This could create a risk
of fire or electric shock. If an object falls into the machine that you cannot remove, unplug the
machine and consult a qualified service representative.
Do not place this machine on an unstable cart, stand or table. The machine could be seriously
damaged if it falls.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
Never touch bare telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be
a remote risk of electric shock from lightning.
Do not use a telephone to report a gas leak in the vicinity of the leak.
The power outlet must be installed near the equipment and must be easily accessible.
3
all.book⦆⦆Page⦆4⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
Table of Contents
A Look at the Operation Panel 6
1. Installation 8
Unpacking Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Loading the Imaging Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Loading Printing Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Entering Your Name and Fax Number . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Setting the Reception Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. Sending Faxes 23
Transmittable Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Loading the Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Adjusting the Resolution and Contrast . . . . . . . . . . . . . . . . . . . . . . . 25
Sending a Fax by Normal Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Sending a Fax by Automatic Dialing. . . . . . . . . . . . . . . . . . . . . . . . . 28
Sending a Fax From Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3. Receiving Faxes 36
Using FAX Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using TEL Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Optional Reception Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Substitute Reception to Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
4. Making Copies 42
5. Special Functions 44
Caller ID (Requires Subscription to Service) . . . . . . . . . . . . . . . . . . 44
Distinctive Ring (Requires Subscription to Service) . . . . . . . . . . . . . 49
Blocking Reception of Unwanted Faxes. . . . . . . . . . . . . . . . . . . . . . 50
6. Printing Lists 51
4
all.book⦆⦆Page⦆5⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
Table of Contents
7. Maintenance 54
8. Troubleshooting 57
Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Messages and Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Clearing Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Ordering Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
FCC Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Quick Reference Guide 70
Guía de referencia rápida 71
Index 72
5
all.book⦆⦆Page⦆6⦆⦆Monday,⦆August⦆6,⦆2001⦆⦆2:24⦆PM
A Look at the Operation Panel
1 2 3 4 5
UP ABC DEF
TEL FAX 1 2 3
GHI JKL MNO
4 5 6
Z A
REDIAL PQRS TUV WXYZ
RESOLUTION/
RECEPTION MODE 7 8 9
STOP COPY/HELP START/MEMORY
FUNCTION SPEAKER
D 0
OWN
6 7 8 9 10 11
1 Display
This displays messages and prompts to help you operate the machine.
2 RESOLUTION / RECEPTION MODE key
When a document is in the feeder, press this key to adjust the resolution for
faxing or copying. At any other time, press this key to select the reception
mode (an arrow in the display will point to the currently selected reception
mode).
3 Left and right arrow keys
Auto-dial numbers: When sending a fax or making a phone call, press these
keys to scroll through your auto-dial numbers, the “REVIEW CALLS” list (only
available if you have Caller ID), and the last number dialed (redial).
FUNCTION key settings: Press the right arrow key after scrolling with the up
and down arrow keys to select a FUNCTION key setting.
4 Number keys
Use these keys to dial numbers, and enter numbers and letters when storing
auto-dial numbers.
5 Panel release
Press this release to open the operation panel.
6 STOP key
Press this key to cancel an operation before it is completed.
6