TEST REPORT
FROM
RFI GLOBAL SERVICES LTD
Partial Test of: BTM411
To: FCC Part 15.247: 2008 Subpart C, RSS-210 Issue 7 June 2007
& RSS-Gen Issue 2 June 2007
Test Report Serial No:
RFI/RPT1/RP76018JD03A
This Test Report Is Issued Under The Authority
Of Brian Watson, Operations Director:
Checked By:
Signature:
Tony Henriques
Date of Issue:
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
RFI Global Services Ltd. is under license. Other trademarks and trade names are those of their respective
owners. delete if not required
03 November 2009
This report is issued in Adobe Acrobat portable document format (PDF). It is only a valid copy of the report if
it is being viewed in PDF format with the following security options not allowed: Changing the document,
Selecting text and graphics, Adding or changing notes and form fields.
This report may not be reproduced other than in full, except with the prior written approval of RFI Global
Services Ltd. The results in this report apply only to the sample(s) tested.
TEST REPORT
This page has been left intentionally blank.
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
Page 2 of 28
RFI Global Services Ltd
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
Table of Contents
1. Customer Information ..................................................................................................................4
2. Summary of Testing .....................................................................................................................5
3. Equipment Under Test (EUT) .......................................................................................................6
4. Operation and Monitoring of the EUT during Testing ...............................................................8
5. Measurements, Examinations and Derived Results..................................................................9
6. Measurement Uncertainty..........................................................................................................27
Appendix 1. Test Equipment Used................................................................................................28
RFI Global Services Ltd
Page 3 of 28
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
1. Customer Information
Company Name:
Address:
Ezurio Ltd
Saturn House, Mercury Park
Wycome Lane
Woodburn Green
Bucks
HP10 0HH
Page 4 of 28
RFI Global Services Ltd
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
2. Summary of Testing
2.1. General Information
Specification Reference:
Specification Title:
47CFR15.247
Code of Federal Regulations Volume 47 (Telecommunications) 2008:
Part 15 Subpart C (Radio Frequency Devices) - Section 15.247
Specification Reference: RSS-210 Issue 7 June 2007
Specification Title:
Low-power Licence-exempt Radio communication Devices
(All Frequency Bands): Category I Equipment.
Specification Reference: RSS-GEN Issue 2 June 2007
Specification Title:
Site Registration:
Location of Testing:
Test Dates:
General Requirements and Information for the Certification of Radio
communication Equipment
FCC: 209735; Industry Canada: 3245B-2
RFI Global Services Ltd, Wade Road, Basingstoke, Hampshire, RG24 8AH.
28 September 2009 to 07 October 2009
2.2. Summary of Test Results
FCC Reference
(47CFR)
IC Reference
Measurement
Part 15.109
RSS-Gen 4.10/6 Receiver/Idle Mode Radiated Spurious
Emissions
Part 15.247(b)(3)
Part 15.247(d) &
15.209(a)
Part 15.247(d) &
15.209(a)
Key to Results
RSS-Gen 4.8
RSS-210 A8.4(2) Transmitter Maximum Peak Output Power
RSS-Gen 4.9
RSS-210 A8.5
RSS-Gen 4.9
RSS-210 A8.5
Transmitter Band Edge Radiated Emissions
Transmitter Radiated Emissions
= Complied
= Did not comply
Port
Type
Result
Antenna
Antenna
Antenna
Antenna
2.3. Methods and Procedures
Reference:
Title:
Reference:
Title:
ANSI C63.4 (2003)
American National Standard Methods of Measurement of Electromagnetic
Emissions from Low Voltage Electrical and Electronic Equipment in the Range
of 9 kHz to 40 GHz.
DA00-705 (2000)
Filing and Frequency Measurement Guidelines for Frequency Hopping Spread
Spectrum Systems.
2.4. Deviations from the Test Specification
Radiated testing only was performed as requested by the customer.
RFI Global Services Ltd
Page 5 of 28
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
3. Equipment Under Test (EUT)
3.1. Identification of Equipment Under Test (EUT)
Brand Name:
Model Name or Number:
Serial Number:
Hardware Version Number:
Software Version Number:
FCC ID Number:
Industry Canada Certification Number: 1931B-BTM411
Bluetooth Data Module
BTM411
None stated
02
16.1
PI4411B
3.2. Description of EUT
The equipment under test was a Bluetooth data module.
3.3. Modifications Incorporated in the EUT
No modifications were applied to the EUT during testing.
Page 6 of 28
RFI Global Services Ltd
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
3.4. Additional Information Related to Testing
Tested Technology:
Power Supply Requirement:
Type of Unit:
Channel Spacing:
Mode:
Modulation:
Packet Type: (Maximum Payload)
Data Rate (Mbit/s):
Maximum Transmit EIRP:
Transmit Frequency Range:
Transmit Channels Tested:
Bluetooth
Nominal
Transceiver
1 MHz
Basic Rate
GFSK
DH5
1
0.4 dBm
2402 to 2480 MHz
Channel ID
Receive Frequency Range:
Receive Channels Tested:
Bottom
Middle
Top
2402 to 2480 MHz
0
39
78
Channel ID
Channel Number
Bottom
Middle
Top
0
39
78
3.5. Support Equipment
The following support equipment was used to exercise the EUT during testing:
Description:
Brand Name:
Model Name or Number:
Serial Number:
Laptop
Sony
Vaio
218982505100620
5.0 V
Enhanced Data Rate
π/4-DQPSK
2DH5
2
8DQPSK
3DH5
3
Channel Number
Channel
Frequency
(MHz)
2402
2441
2480
Channel
Frequency
(MHz)
2402
2441
2480
RFI Global Services Ltd
Page 7 of 28
TEST REPORT
SERIAL NO: RFI/RPT1/RP76018JD03A
ISSUE DATE: 03 NOVEMBER 2009
4. Operation and Monitoring of the EUT during Testing
4.1. Operating Modes
The EUT was tested in the following operating mode(s):
• Transmit mode with Basic rate (DH5 packets) or EDR (2DH5 or 3DH5 packets) as required.
• Receive Mode: Standalone, with the Bluetooth mode active but not transmitting.
4.2. Configuration and Peripherals
The EUT was tested in the following configuration(s):
• EUT was connected via a radio link to a Bluetooth tester in order to place the EUT into
Bluetooth test mode. The laptop PC with the client’s bespoke application was used to place
the EUT into Bluetooth Test mode.
• For Transmitter Radiated Spurious Emissions, both EDR/Basic rate modes were compared
and tests were performed with the mode that presented a worse case result.
Page 8 of 28
RFI Global Services Ltd