三洋数码摄像机-VPC-HD700EX说明书.pdf

发布时间：2022-05-20 发布人：admin 分类：说明书资料大小：3.14M 资料格式：pdf 举报版权申诉

第1页 / 共241页

第2页 / 共241页

第3页 / 共241页

第4页 / 共241页

第5页 / 共241页

第6页 / 共241页

第7页 / 共241页

第8页 / 共241页

文本预览

INSTRUCTION MANUAL Digital Movie Camera VPC-HD700EX VPC-HD700 VPC-HD700GX Important note This manual explains how to safely operate the VPC-HD700EX, VPC-HD700 and VPC-HD700GX. Any information regarding only one of these products will be labeled as such. Please read these instructions carefully before using the camera. Make sure to read and understand the separate booklet “SAFETY MANUAL”. Keep this manual in a safe place for later reference.

Warning TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. FOR AMERICAN USERS The following advisory is included in accordance with the laws of the State of California (USA): WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling. i This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: h Reorient or relocate the receiving antenna. h Increase the separation between the equipment and receiver. h Connect the equipment into an outlet on a circuit different from that to i Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. which the receiver is connected. h Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity Model number: VPC-HD700 Trade Name: SANYO Responsible party: SANYO FISHER COMPANY Address: 21605 Plummer Street, Chatsworth, California 91311 Telephone No.: (818) 998-7322 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation. i English

FOR CANADIAN USERS i This Class B digital apparatus complies with Canadian ICES-003. FOR EU USERS Note: iThis symbol mark and recycle system apply only to EU countries and do not apply to countries in other areas of the world. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! SANYO FISHER Sales (Europe) GmbH Stahlgruberring 4, D-81829 München, Germany SANYO Electric Co., Ltd. 1-1, Sanyo-cho, Daito City, Osaka 574-8534, Japan FOR RUSSIAN USERS This product certified by official certification company which is authorized by Russian Federation. English ii

Symbols used in this manual HINT Points giving some extended instructions or special points to pay attention to. CAUTION Points that require special attention. (page xx) Refer to the page indicated for detailed information. You may find the answers to questions or problems concerning camera operation in the sections “COMMONLY ASKED QUESTIONS” (page 187) and “TROUBLESHOOTING” (page 195). iii English

SHOOT, PLAY BACK AND SAVE Install the battery pack and card 1 Insert the battery pack. Battery cover 1 2 Battery pack 3 2 Insert the SD Memory Card. h An SD Memory Card is not included with your camera. Please purchase a commercially sold card. h In this manual, the SD Memory Card is referred to as the “card”. Card slot cover Card slot SD Memory card English iv

SHOOT, PLAY BACK AND SAVE Before capturing those important shots, be sure to first take a test shot to confirm that your camera is set up and ready to go i Sanyo declines any claim for compensation for recorded contents etc. in case of photographing or recording failure due to a chance camera or card flaw. Shooting 1 Set the REC/PLAY switch REC/PLAY switch to REC. 2 Press the ON/OFF button for at least 1 second to turn the camera on. h If the screen to set the date and time appears, press the MENU button 2 times to cancel it. For how to set the date and time, see page 42. 3 Record. To record a video clip: h Press the [ ] button to begin recording a video clip. h Press the [ ] button again to end the recording. To take a photo: h Press the [ ] button. h A still image is captured. Set to REC [ [ Monitor ] button ] button ON/OFF button 362 00:05:08 362 00:05:08 362 00:05:08 HD-SHQ F3.5F3.5 F3.5 1/301/30 1/30 v English

Playback 1 Set the REC/PLAY switch to PLAY. h The display changes to the Playback Screen and the image that was just captured is shown. 2 Toggle the SET button to the left or right to display the image you wish to see.

SHOOT, PLAY BACK AND SAVE Burn your recorded video clips onto a DVD (Windows XP) Introduced here is the procedure to use the supplied DVD-ROM (Xacti Software DVD) to burn movies captured with your camera to a DVD, creating your original DVD. Install the application programs Install two programs from the Xacti Software DVD to your computer: Adobe Photoshop Album Starter Edition (in this manual, referred to as Photoshop Album SE) and, for creating DVDs, Adobe Premiere Elements 3.0 (in this manual, referred to as Premiere Elements). 1 Set the supplied DVD-ROM (Xacti Software DVD) in your computer’s DVD drive. h The installation window opens. 2 Click on the application program you wish to install. Install Photoshop Album SE. Install Premiere Elements. h After clicking on an application program, follow the instructions shown on the monitor to install the program. h When installing Premiere Elements, input the serial number found on the DVD-ROM envelope. It looks similar to the following: SERIAL NUMBER: XXXX-XXXX-XXXX-XXXX-XXXX-XXXX ( ↑ input this number) h When the installation is complete, the product registration window will appear, but click on the Exit button to close the window. vii English

分享到：

赞收藏

资料库

三洋数码摄像机-VPC-HD700EX说明书.pdf

相关推荐

数码摄像机

热门标签

最新资料