惠普(康柏)投影机-Compaq Microportable Projector MP2800说明书.pdf-资料库

第1页 / 共61页

第2页 / 共61页

第3页 / 共61页

第4页 / 共61页

第5页 / 共61页

第6页 / 共61页

第7页 / 共61页

第8页 / 共61页

Notice  2000 Compaq Computer Corporation. COMPAQ and the Compaq logo Registered in U.S. Patent and Trademark Office. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or other countries. All other product names mentioned herein may be trademarks or registered trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is subject to change without notice and is provided “as is” without warranty of any kind. The entire risk arising out of the use of this information remains with the recipient. In no event shall Compaq be liable for any direct, consequential, incidental, special, punitive, or other damages whatsoever (including without limitation, damages for loss of business profits, business interruption, or loss of business information), even if Compaq has been advised of the possibility of such damages. The limited warranties for Compaq products are exclusively set forth in the documentation accompanying such products. Nothing herein should be construed as constituting a further or additional warranty. User’s Guide Compaq MP2800 Microportable Projector First Edition October 2000 Published in U.S.A., U.K., Singapore, and Taiwan. Documentation Part Number 216023-001 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 1 Words: 197 File Name: Notice Saved date: 09/22/00 10:46 AM

Preface Using This Guide The User’s Guide includes general information about your projector, troubleshooting and diagnostics, and technical specifications. Symbols and Conventions The following words and symbols mark special messages throughout this guide: ✎ Text set off in this manner presents clarifying information, specific instructions, commentary, sidelights, or interesting points of view. ! WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Preface 2 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Saved date: 08/25/00 3:16 PM - File Name: aqPrefac.doc

Warning Messages Before operating the projector, please read the following messages. ! WARNING: To reduce the risk of harm to your eyes, do not look directly into the bright light of the projection lens. To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. To reduce the risk of electric shock, do not disassemble the projector other than to replace the lamp module. To reduce the risk of personal injury, allow the unit to cool down before changing the lamp, and always unplug the power cord first. Preface 3 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Saved date: 08/25/00 3:16 PM - File Name: aqPrefac.doc

Chapter 1 Getting Started Product Features The Compaq MP2800 Microportable Projector generates crisp, clear images onto a projection screen by using Digital Light Processing (DLP) technology. The microportable projector offers the latest in portable projection technology, including: 1024 768 native XGA resolution Maximum resolution: 1280 x 1024 HDTV capable 720p and 1080i via DVI port and 1080p via VGA port User replaceable 130 watt high-efficiency, long-life lamp Manual 1.2:1 zoom lens Electronic scaling to 32X Weighs 3.00 pounds (1.36 kg) Convenient auto-image adjustment 16.7 million displayable colors Flash ROM upgradeable Connector options: I Standard analog VGA I Digital DVI I S-video (with Multimedia Adapter) [optional use] I Composite video (with Multimedia Adapter) [optional use] Multimedia Adapter with speaker [optional use] Full-featured remote control with remote mouse capabilities [optional use] Multilingual on-screen adjustment menu Plug and Play capability Projector carrying case Compaq Presentation utility allows quick setup with portable computers Getting Started 4 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc

Compaq Projector Display Assistant utility to adjust screen settings Security lock slot Introduction Before setting up your Compaq Microportable Projector, be sure your shipping box includes the following items: Getting Started 5 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc

Projector and lens cap 10-foot power cable RS232 (serial) to DVI upgrade adapter Eight signal cables: One VGA signal cable for use with computers, portables, and some handheld products One digital DVI to DVI signal cable for use with compatible S-video cable (for connecting digital devices such as a DVD Composite video cable (for connecting to a videocassette digital sources player, camcorder, etc.) recorder) Audio cables (2; one cable has mini connectors on both ends and is used to connect the Multimedia Adapter to a computer; the other cable has two RCA connectors on one end and a mini connector on the other end and is used to connect a videocassette recorder to a computer) Remote control Y-cable 8-pin to USB/RS232 Y-cable used to connect the Multimedia Adapter to a computer for use with the remote control. When using the Y-cable, do not connect both the USB and RS232 connectors to a computer at the same time. The USB connector is the preferred connector. NOTE: The remote control Page Up and Page Down functions require an additional driver when used with the RS232 connector. This driver can be found on the CD-ROM that came with your projector. Component HDTV to VGA cable (optional use) Compaq Multimedia Adapter (optional use) Remote control, including two AAA batteries (optional use) Carrying case CD-ROM containing the Compaq Presentation utility program, Compaq Projector Display Assistant utility, RS232 driver, and the Users Guide Two Quick Setup cards and the Agency Regulatory Notices booklet Getting Started 6 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc

If your shipping box does not contain all of the listed items, please contact your Compaq authorized dealer, reseller, or service provider. Setting Up the Projector Follow the instructions below and on the following pages to set up the projector. Separate setup instructions are described for the following products: Portable computers Desktop computers Compaq PC Companions with VGA capability Videocassette recorder, DVD, or camcorder (requires optional Multimedia Video Adapter) ✎ The projector is hot pluggable and can be connected to any video input source while the source is in use. IMPORTANT: Place the projector on a stable desk or table at a distance not less than 3.74 feet (1.14 meters) and not greater than 32.8 feet (10 meters) from the projection screen. ! WARNING: To reduce the risk of electric shock or damage to your equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the projector by unplug- ging the power cord from the electrical outlet. Do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug. Getting Started 7 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc

Balancing the Projector The projector has a built-in elevator foot used to balance and elevate the projector. Always balance the projector before connecting any device to it. Turn the elevator foot sideways to balance the projector. ! WARNING: To reduce the risk of the projector tipping or overturning, always turn the elevator foot 90° from its original position before pressing the elevator button. Refer to the Adjusting the Projector Height section later in this chapter. Getting Started 8 Part Number: 216023-001 - Writer: Carey Gregg - Saved by: The Integrity Group Pages: 18 Words: 2766 Saved date: 09/22/0010:37 AM File Name: Ch01.doc

资料库

惠普(康柏)投影机-Compaq Microportable Projector MP2800说明书.pdf

相关推荐

投影机

热门标签

最新资料