JVC数码摄像机-GR-AXM368说明书.pdf

发布时间：2022-05-20 发布人：admin 分类：说明书资料大小：1.08M 资料格式：pdf 举报版权申诉

第1页 / 共46页

第2页 / 共46页

第3页 / 共46页

第4页 / 共46页

第5页 / 共46页

第6页 / 共46页

第7页 / 共46页

第8页 / 共46页

文本预览

2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa- tion and precautions contained in the following pages to ensure safe use of your new camcorder. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (墌 pg. 3). • Notes appear after most subsections. Be sure to read these as well. • Basic and advanced features/operation are separated for easier reference. It is recommended that you . . . .... refer to the Index (墌 pg. 42 – 43) and familiarize yourself with button locations, etc. before use. .... read thoroughly the Safety Precautions that follow and cautions (墌 pg. 45, 46). They contain extremely important information regarding the safe use of your new camcorder. SAFETY PRECAUTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTIONS: 䡲 To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel. 䡲 When you are not using the AC Power Adapter/Battery charger for a long period of time, it is recommended that you disconnect the power cord from AC outlet. NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ● The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom. PAL Warning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C or incinerate. Replace the battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another battery may present a risk of fire or explosion. 䡲 Dispose of used battery promptly. 䡲 Keep away from children. 䡲 Do not disassemble and do not dispose of in fire. This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere. Use the BN-V12U/V22U/V25U battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/ Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.) This unit is produced to comply with Standard IEC Publ. 65. 䡲 Camcorder is designed exclusively for the VHS-C video cassette. Only cassettes marked VHS-C can be used with this unit. 䡲 HQ VHS is compatible with existing VHS equipment.

EN 3 EN 3 CONTENTS 4 GETTING STARTED Power .............................................. 4 Clock (Lithium) Battery Insertion/Removal ..... 6 Date/Time Setting ................................ 7 Tape Length Setting ............................... 8 Recording Mode Setting .......................... 8 Loading/Unloading A Cassette .................. 9 Grip Adjustment ................................. 10 Viewfinder Adjustment ......................... 10 Shoulder Strap Attachment .................... 11 Tripod Mounting ................................. 11 12 RECORDING Basic Recording ................................. 12 Basic Features .................................. 16 Advanced Features ............................. 20 34 Basic Playback .................................. 34 Features ......................................... 35 Using The Cassette Adapter .................. 37 Basic Connections .............................. 38 39 40 42 Controls ......................................... 42 Connectors ...................................... 42 Indicators ........................................ 42 Other Parts ..................................... 42 LCD Monitor/Viewfinder Indications ........ 44 45 47 TAPE DUBBING TROUBLESHOOTING INDEX CAUTIONS SPECIFICATIONS PLAYBACK MAJOR FEATURES 䡲 LCD Colour Monitor (墌 pg. 14) 䡲 Program Manager II (墌 pg. 18 – 33) 䡲 Programme AE with Special Effects (墌 pg. 20, 21) •Auto Mode Lock •Auto Mode Release •Electronic Fog Filter •ND Effect •Sepia •Twilight •Sports •1/1000 sec. High Speed Shutter •1/2000 sec. High Speed Shutter 䡲 5Sec.-Rec (5 sec. Recording) (墌 pg. 18) 䡲 22x Optical Hyper Zoom (墌 pg. 16) The Logical Choice The only compact video cassettes that can be used with your VHS VCR* *With Cassette Adapter PROVIDED ACCESSORIES • AC Power Adapter/ Charger AA-V15EG • Cassette Adapter C-P7U •Shoulder Strap • Lithium Battery CR2025 x 1 (clock operation) • DC Cord • Battery Pack BN-V12U •AUDIO/VIDEO (A/V) Cable

4 EN CHG. (charge) indicator Marks To AC outlet REFRESH switch REFRESH indicator REFRESH The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging. Perform the REFRESH function after no less than 5 chargings. To discharge the battery . . . ..... attach the battery pack to the adapter as shown in the above illustration. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete. Hook on. 11 2 Push in. GETTING STARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power. NOTES: ● No function is available without power supply. ● Use only specified power supply. ● Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK SUPPLY POWER outlet. ATTACH BATTERY PACK 1 Connect the charger’s AC power cord to a wall 2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. •The CHG. indicator begins blinking to indicate charging has started. DETACH BATTERY PACK 3 When the CHG. indicator stops blinking but stays lit, charging is finished. Slide the battery pack opposite the direction of the arrow. CHARGE BATT. PACK BN-V12U approx. 1 hr. 10 min. BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs. BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs. DISCHARGE approx. 3 hrs. 30 min. USING THE BATTERY PACK ATTACH BATTERY PACK battery pack in until it locks in place. DETACH BATTERY PACK 1 Hook its top end to the camcorder and push the 2 Slide BATT. RELEASE and pull out the battery pack. BATT. RELEASE Approximate recording time (unit: min.) ATTENTION: Before detaching the power source, make sure that the camcorder’s power is turned off. Failure to do so can result in a camcorder malfunction. BATT. PACK BN-V12U BN-V22U BN-V25U LCD monitor on/ Viewfinder off Viewfinder on Viewfinder on LCD monitor off/ monitor on/ LCD 60 125 165 60 130 170 50 110 145

Charge marker EN 5 CHARGE MARKER A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)—you choose which one means charged and which means discharged. NOTES: ● The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs. ● Charging times noted on page 4 are for fully discharged battery pack, and discharging times are for fully charged battery pack. your camcorder. ● Charging and discharging times vary according to the ambient temperature and the status of the battery pack. ● Remember to set the charge marker after charging a battery pack or after detaching a discharged one from ● Perform the REFRESH function after no less than 5 chargings. ● While the AC Power Adapter/Charger’s power cord is disconnected from the AC outlet, it is possible to discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does not charge the battery. When disharging is complete, detach the battery from the AC Power Adapter/ Charger to store it. ● High temperatures can damage the battery pack, so use only where good ventilation is available. Don’t allow it to discharge in container, such as a bag. ● If you stop recharging or discharging part way through, make sure to remove the battery pack before unplugging the adapter’s AC cord. ● Remove the battery pack from the adapter immediately after discharging. ● To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio. ● Make sure you unplug the DC cord before charging or discharging the battery pack. ● The CHG. indicator may not light properly with a brand new battery pack, or with one that’s been stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG. indicator should blink during recharging. If not, contact your nearest JVC dealer. DC OUT terminal To DC IN jack DC cord To AC outlet AC Power Adapter/Charger AA-V15EG To car’s cigarette lighter socket Car Battery Charger/Adapter BH-V3E (optional) USING A CAR BATTERY Use the optional Car Battery Charger/Adapter (connect as shown in the illustration above). NOTES: ● When using the car battery, leave the engine idling. ● The optional Car Battery Charger (BH-V3E) can also be used to charge the battery pack. ● When using the optional Car Battery Charger, refer to the respective instruction booklet. USING AC POWER Use the AC Power Adapter (connect as shown in the illustration above). NOTE: The supplied AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.

6 EN A GETTING STARTED (cont.) Clock (Lithium) Battery Insertion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER supply unit. OPEN COVER 1 Switch off the unit’s power and remove the power 2 Open the clock battery compartment cover while pressing the release tab. REMOVE BATTERY (when replacing) 3 Insert a pointed, non-metallic object between the battery and the compartment ( A ) and pull the battery out. INSERT BATTERY CR2025 lithium battery and push it in. CLOSE COVER 4 Ensure that the plus (+) side is up and insert a 5 Close the compartment cover until it clicks in place. NOTE: See “SAFETY PRECAUTIONS” (墌 pg. 2) for information on safe handling of lithium batteries.

Date/Time Setting EN 7 ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DATE/TIME”, then press it. The DATE/TIME Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial to move highlight bar to “EXIT” and press it, then go to step 6. •If you want to set only the time without changing the date, go to step 4. SET DATE 3 Rotate the MENU Jog Dial to move the highlight bar to the item you want to set and then press it. When the setting begins blinking, rotate the MENU Jog Dial until the correct setting appears and then press it. The setting stops blinking. •Repeat this procedure until you’re satisfied with the Date settings (“YEAR”, “MONTH” and “DAY”). SET TIME 4 Rotate the MENU Jog Dial to move the highlight bar to “TIME” and then press it. When the hour setting begins blinking, rotate the MENU Jog Dial until the correct setting appears and then press it. When the hour setting stops blinking and the minute setting begins blinking, rotate the MENU Jog Dial until the correct setting appears and then press it. The minute setting stops blinking. START CLOCK OPERATION 5 When none of these settings (YEAR, MONTH, DAY, TIME) blinks, rotate the MENU Jog Dial to move the highlight bar to “EXIT”, and press it. The Menu Screen appears and “MENU END” is highlighted. CLOSE MENU 6 Press the MENU Jog Dial. NOTE: To display the date and time in the viewfinder and on a connected TV, see “Date/Time/Character Insert” (墌 pg. 19). Select Dial MENU Jog Dial LCD monitor or viewfinder MENU 4MENU END FOCUS EXPOSURE DATE TIME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4NEXT AUTO AUTO 1. 1. 98 OFF T30 AUTO FAST Menu Screen DATE TIME YEAR MONTH DAY TIME 1998 1 1 22:50 EXIT DATE/TIME Setting Menu 24-hour indication MENU 4MENU END FOCUS EXPOSURE DATE TIME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4NEXT AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST

8 EN LCD monitor or Viewfinder MENU 4MENU END FOCUS EXPOSURE DATE TIME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4NEXT AUTO AUTO 25. 12. 98 OFF T60 AUTO FAST Menu Screen TAPE LENGTH T30 T45 T60 EXIT TAPE LENGTH Setting Menu MENU 4MENU END FOCUS EXPOSURE DATE TIME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4NEXT AUTO AUTO 25. 12. 98 OFF T30 AUTO FAST SP/LP Recording Mode Button Select Dial MENU Jog Dial SP T60 Tape length indicator Recording mode indicator GETTING STARTED (cont.) Tape Length Setting Set the tape length according to the length of the tape used. ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. Turn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears. SET TAPE LENGTH 3 Rotate the MENU Jog Dial to move the highlight bar to the correct setting. T30=30 minutes of recording time, T45=45 minutes, and T60=60 minutes (in SP). •If you decide you want to return the tape length to the previous setting, rotate the MENU Jog Dial to move the highlight bar to “EXIT”. CLOSE MENU 4 Press the MENU Jog Dial. The Menu Screen reappears and the highlight bar is on “MENU END”. Then press the MENU Jog Dial again to close the Menu Screen. NOTES: ● The tape remaining time (墌 pg. 13) is correct only if the correct tape length has been selected. ● Once you have set the tape length, it remains un- changed even if the Select Dial is returned to AUTO LOCK. Recording Mode Setting Set depending on your preference. SET RECORDING MODE 1 First set the Power Switch to “CAMERA”. Press SP/LP Button for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “LP” (Long Play) is more economical, providing three times as the recording time. NOTE: If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

44 22 33 1 5 Turn to take up slack. Erase Protection Gear Loading/Unloading A Cassette EN 9 OPEN LCD MONITOR degrees. OPEN CASSETTE HOLDER to open. INSERT/REMOVE CASSETTE 1 Open the LCD monitor to an angle of over 45 2 Press EJECT until the holder opens. Do not use force 3 Make sure the label is facing outward. CLOSE CASSETTE HOLDER 4 Press PUSH and make sure the holder is closed and 5 First make sure the holder is closed. Then close the NOTES: ● Closing the LCD monitor while the cassette holder is locked. CLOSE LCD MONITOR LCD monitor. still open may cause damage to the LCD monitor. ● A cassette holder can’t be opened unless a power supply is attached. ● Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack. ● Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape. ● The cassette holder can’t be opened while the camcorder is in the record mode.

分享到：

赞收藏

资料库

JVC数码摄像机-GR-AXM368说明书.pdf

相关推荐

数码摄像机

热门标签

最新资料