第1页 / 共7页
第2页 / 共7页
第3页 / 共7页
第4页 / 共7页
第5页 / 共7页
第6页 / 共7页
第7页 / 共7页
使用Python3+PyQT5+Pyserial 实现简单的串口工具方法.pdf
使用使用Python3+PyQT5+Pyserial 实现简单的串口工具方法
实现简单的串口工具方法
练手项目，先上图
练手项目，先上图
先实现一个简单的串口工具，为之后的上位机做准备
代码如下：
代码如下：
github 下载地址
pyserial_demo.py
import sys
import serial
import serial.tools.list_ports
from PyQt5 import QtWidgets
from PyQt5.QtWidgets import QMessageBox
from PyQt5.QtCore import QTimer
from ui_demo_1 import Ui_Form
class Pyqt5_Serial(QtWidgets.QWidget, Ui_Form):
def __init__(self):
super(Pyqt5_Serial, self).__init__()
self.setupUi(self)
self.init()
self.setWindowTitle("串口小助手")
self.ser = serial.Serial()
self.port_check()
# 接收数据和发送数据数目置零
self.data_num_received = 0
self.lineEdit.setText(str(self.data_num_received))
self.data_num_sended = 0
self.lineEdit_2.setText(str(self.data_num_sended))
def init(self):
# 串口检测按钮
self.s1__box_1.clicked.connect(self.port_check)
# 串口信息显示
self.s1__box_2.currentTextChanged.connect(self.port_imf)
# 打开串口按钮
self.open_button.clicked.connect(self.port_open)
# 关闭串口按钮
self.close_button.clicked.connect(self.port_close)
# 发送数据按钮
self.s3__send_button.clicked.connect(self.data_send)
# 定时发送数据
self.timer_send = QTimer()
self.timer_send.timeout.connect(self.data_send)
self.timer_send_cb.stateChanged.connect(self.data_send_timer)
# 定时器接收数据
self.timer = QTimer(self)
self.timer.timeout.connect(self.data_receive)
# 清除发送窗口
self.s3__clear_button.clicked.connect(self.send_data_clear)
# 清除接收窗口
self.s2__clear_button.clicked.connect(self.receive_data_clear)
# 串口检测
def port_check(self):
# 检测所有存在的串口，将信息存储在字典中
self.Com_Dict = {}
port_list = list(serial.tools.list_ports.comports())
self.s1__box_2.clear()
for port in port_list:
self.Com_Dict["%s" % port[0]] = "%s" % port[1] self.s1__box_2.addItem(port[0])
if len(self.Com_Dict) == 0:
self.state_label.setText(" 无串口")
# 串口信息
def port_imf(self):
# 显示选定的串口的详细信息
imf_s = self.s1__box_2.currentText()
if imf_s != "":
self.state_label.setText(self.Com_Dict[self.s1__box_2.currentText()])
# 打开串口
def port_open(self):
self.ser.port = self.s1__box_2.currentText()
self.ser.baudrate = int(self.s1__box_3.currentText())
self.ser.bytesize = int(self.s1__box_4.currentText())
self.ser.stopbits = int(self.s1__box_6.currentText())
self.ser.parity = self.s1__box_5.currentText()
try:
self.ser.open()
except:
QMessageBox.critical(self, "Port Error", "此串口不能被打开！")
return None
# 打开串口接收定时器，周期为2ms
self.timer.start(2)
if self.ser.isOpen():
self.open_button.setEnabled(False)
self.close_button.setEnabled(True)
self.formGroupBox1.setTitle("串口状态（已开启）")
# 关闭串口
def port_close(self):
self.timer.stop()
self.timer_send.stop()
try:
self.ser.close()
except:
pass
self.open_button.setEnabled(True)
self.close_button.setEnabled(False)
self.lineEdit_3.setEnabled(True)
# 接收数据和发送数据数目置零
self.data_num_received = 0
self.lineEdit.setText(str(self.data_num_received))
self.data_num_sended = 0
self.lineEdit_2.setText(str(self.data_num_sended))
self.formGroupBox1.setTitle("串口状态（已关闭）")
# 发送数据
def data_send(self):
if self.ser.isOpen():
input_s = self.s3__send_text.toPlainText()
if input_s != "":
# 非空字符串
if self.hex_send.isChecked():
# hex发送
input_s = input_s.strip()
send_list = [] while input_s != '':
try:
num = int(input_s[0:2], 16)
except ValueError:
QMessageBox.critical(self, 'wrong data', '请输入十六进制数据，以空格分开!')
return None
input_s = input_s[2:].strip()
send_list.append(num)
input_s = bytes(send_list)
else:
# ascii发送
input_s = (input_s + '\r\n').encode('utf-8')
num = self.ser.write(input_s)
self.data_num_sended += num
self.lineEdit_2.setText(str(self.data_num_sended))
else:
pass
# 接收数据
def data_receive(self):
try:
num = self.ser.inWaiting()
except:
self.port_close()
return None
if num > 0:
data = self.ser.read(num)
num = len(data)
# hex显示
if self.hex_receive.checkState():
out_s = ''
for i in range(0, len(data)):
out_s = out_s + '{:02X}'.format(data[i]) + ' '
self.s2__receive_text.insertPlainText(out_s)
else:
# 串口接收到的字符串为b'123',要转化成unicode字符串才能输出到窗口中去
self.s2__receive_text.insertPlainText(data.decode('iso-8859-1'))
# 统计接收字符的数量
self.data_num_received += num
self.lineEdit.setText(str(self.data_num_received))
# 获取到text光标
textCursor = self.s2__receive_text.textCursor()
# 滚动到底部
textCursor.movePosition(textCursor.End)
# 设置光标到text中去
self.s2__receive_text.setTextCursor(textCursor)
else:
pass
# 定时发送数据
def data_send_timer(self):
if self.timer_send_cb.isChecked():
self.timer_send.start(int(self.lineEdit_3.text()))
self.lineEdit_3.setEnabled(False)
else:
self.timer_send.stop()
self.lineEdit_3.setEnabled(True)
# 清除显示
def send_data_clear(self):
self.s3__send_text.setText("")
def receive_data_clear(self):
self.s2__receive_text.setText("")
if __name__ == '__main__':
app = QtWidgets.QApplication(sys.argv)
myshow = Pyqt5_Serial()
myshow.show()
sys.exit(app.exec_())
ui_demo_1.py
# -*- coding: utf-8 -*-
# Form implementation generated from reading ui file 'demo_1.ui'
#
# Created by: PyQt5 UI code generator 5.6
#
# WARNING! All changes made in this file will be lost!
from PyQt5 import QtCore, QtGui, QtWidgets
class Ui_Form(object):
def setupUi(self, Form):
Form.setObjectName("Form")
Form.resize(707, 458)
self.formGroupBox = QtWidgets.QGroupBox(Form)
self.formGroupBox.setGeometry(QtCore.QRect(20, 20, 167, 301))
self.formGroupBox.setObjectName("formGroupBox")
self.formLayout = QtWidgets.QFormLayout(self.formGroupBox)
self.formLayout.setContentsMargins(10, 10, 10, 10)
self.formLayout.setSpacing(10)
self.formLayout.setObjectName("formLayout")
self.s1__lb_1 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_1.setObjectName("s1__lb_1")
self.formLayout.setWidget(0, QtWidgets.QFormLayout.LabelRole, self.s1__lb_1)
self.s1__box_1 = QtWidgets.QPushButton(self.formGroupBox)
self.s1__box_1.setAutoRepeatInterval(100)
self.s1__box_1.setDefault(True)
self.s1__box_1.setObjectName("s1__box_1")
self.formLayout.setWidget(0, QtWidgets.QFormLayout.FieldRole, self.s1__box_1)
self.s1__lb_2 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_2.setObjectName("s1__lb_2")
self.formLayout.setWidget(1, QtWidgets.QFormLayout.LabelRole, self.s1__lb_2)
self.s1__box_2 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_2.setObjectName("s1__box_2")
self.formLayout.setWidget(1, QtWidgets.QFormLayout.FieldRole, self.s1__box_2)
self.s1__lb_3 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_3.setObjectName("s1__lb_3")
self.formLayout.setWidget(3, QtWidgets.QFormLayout.LabelRole, self.s1__lb_3)
self.s1__box_3 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_3.setObjectName("s1__box_3")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.s1__box_3.addItem("")
self.formLayout.setWidget(3, QtWidgets.QFormLayout.FieldRole, self.s1__box_3)
self.s1__lb_4 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_4.setObjectName("s1__lb_4")
self.formLayout.setWidget(4, QtWidgets.QFormLayout.LabelRole, self.s1__lb_4)
self.s1__box_4 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_4.setObjectName("s1__box_4")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.s1__box_4.addItem("")
self.formLayout.setWidget(4, QtWidgets.QFormLayout.FieldRole, self.s1__box_4)
self.s1__lb_5 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_5.setObjectName("s1__lb_5")
self.formLayout.setWidget(5, QtWidgets.QFormLayout.LabelRole, self.s1__lb_5)
self.s1__box_5 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_5.setObjectName("s1__box_5")
self.s1__box_5.addItem("")
self.formLayout.setWidget(5, QtWidgets.QFormLayout.FieldRole, self.s1__box_5)
self.open_button = QtWidgets.QPushButton(self.formGroupBox)
self.open_button.setObjectName("open_button")
self.formLayout.setWidget(7, QtWidgets.QFormLayout.SpanningRole, self.open_button)
self.close_button = QtWidgets.QPushButton(self.formGroupBox)
self.close_button.setObjectName("close_button")
self.formLayout.setWidget(8, QtWidgets.QFormLayout.SpanningRole, self.close_button)
self.s1__lb_6 = QtWidgets.QLabel(self.formGroupBox)
self.s1__lb_6.setObjectName("s1__lb_6")
self.formLayout.setWidget(6, QtWidgets.QFormLayout.LabelRole, self.s1__lb_6)
self.s1__box_6 = QtWidgets.QComboBox(self.formGroupBox)
self.s1__box_6.setObjectName("s1__box_6")
self.s1__box_6.addItem("")
self.formLayout.setWidget(6, QtWidgets.QFormLayout.FieldRole, self.s1__box_6)
self.state_label = QtWidgets.QLabel(self.formGroupBox)
self.state_label.setText("")
self.state_label.setTextFormat(QtCore.Qt.AutoText)
self.state_label.setScaledContents(True)
self.state_label.setAlignment(QtCore.Qt.AlignRight|QtCore.Qt.AlignTrailing|QtCore.Qt.AlignVCenter)
self.state_label.setObjectName("state_label")
self.formLayout.setWidget(2, QtWidgets.QFormLayout.SpanningRole, self.state_label)
self.verticalGroupBox = QtWidgets.QGroupBox(Form)
self.verticalGroupBox.setGeometry(QtCore.QRect(210, 20, 401, 241))
self.verticalGroupBox.setObjectName("verticalGroupBox")
self.verticalLayout = QtWidgets.QVBoxLayout(self.verticalGroupBox)
self.verticalLayout.setContentsMargins(10, 10, 10, 10)
self.verticalLayout.setObjectName("verticalLayout")
self.s2__receive_text = QtWidgets.QTextBrowser(self.verticalGroupBox)
self.s2__receive_text.setObjectName("s2__receive_text")
self.verticalLayout.addWidget(self.s2__receive_text)
self.verticalGroupBox_2 = QtWidgets.QGroupBox(Form)
self.verticalGroupBox_2.setGeometry(QtCore.QRect(210, 280, 401, 101))
self.verticalGroupBox_2.setObjectName("verticalGroupBox_2")
self.verticalLayout_2 = QtWidgets.QVBoxLayout(self.verticalGroupBox_2)
self.verticalLayout_2.setContentsMargins(10, 10, 10, 10)
self.verticalLayout_2.setObjectName("verticalLayout_2")
self.s3__send_text = QtWidgets.QTextEdit(self.verticalGroupBox_2)
self.s3__send_text.setObjectName("s3__send_text")
self.verticalLayout_2.addWidget(self.s3__send_text)
self.s3__send_button = QtWidgets.QPushButton(Form)
self.s3__send_button.setGeometry(QtCore.QRect(620, 310, 61, 31))
self.s3__send_button.setObjectName("s3__send_button")
self.s3__clear_button = QtWidgets.QPushButton(Form)
self.s3__clear_button.setGeometry(QtCore.QRect(620, 350, 61, 31))
self.s3__clear_button.setObjectName("s3__clear_button")
self.formGroupBox1 = QtWidgets.QGroupBox(Form)
self.formGroupBox1.setGeometry(QtCore.QRect(20, 340, 171, 101))
self.formGroupBox1.setObjectName("formGroupBox1")
self.formLayout_2 = QtWidgets.QFormLayout(self.formGroupBox1)
self.formLayout_2.setContentsMargins(10, 10, 10, 10)
self.formLayout_2.setSpacing(10)
self.formLayout_2.setObjectName("formLayout_2")
self.label = QtWidgets.QLabel(self.formGroupBox1)
self.label.setObjectName("label")
self.formLayout_2.setWidget(0, QtWidgets.QFormLayout.LabelRole, self.label)
self.label_2 = QtWidgets.QLabel(self.formGroupBox1)
self.label_2.setObjectName("label_2")
self.formLayout_2.setWidget(1, QtWidgets.QFormLayout.LabelRole, self.label_2)
self.lineEdit = QtWidgets.QLineEdit(self.formGroupBox1)
self.lineEdit.setObjectName("lineEdit")
self.formLayout_2.setWidget(0, QtWidgets.QFormLayout.FieldRole, self.lineEdit)
self.lineEdit_2 = QtWidgets.QLineEdit(self.formGroupBox1)
self.lineEdit_2.setObjectName("lineEdit_2")
self.formLayout_2.setWidget(1, QtWidgets.QFormLayout.FieldRole, self.lineEdit_2)
self.hex_send = QtWidgets.QCheckBox(Form)
self.hex_send.setGeometry(QtCore.QRect(620, 280, 71, 16))
self.hex_send.setObjectName("hex_send")
self.hex_receive = QtWidgets.QCheckBox(Form)
self.hex_receive.setGeometry(QtCore.QRect(620, 40, 71, 16))
self.hex_receive.setObjectName("hex_receive")
self.s2__clear_button = QtWidgets.QPushButton(Form)
self.s2__clear_button.setGeometry(QtCore.QRect(620, 80, 61, 31))
self.s2__clear_button.setObjectName("s2__clear_button")
self.timer_send_cb = QtWidgets.QCheckBox(Form)
self.timer_send_cb.setGeometry(QtCore.QRect(260, 390, 71, 16))
self.timer_send_cb.setObjectName("timer_send_cb")
self.lineEdit_3 = QtWidgets.QLineEdit(Form)
self.lineEdit_3.setGeometry(QtCore.QRect(350, 390, 61, 20))
self.lineEdit_3.setAlignment(QtCore.Qt.AlignRight|QtCore.Qt.AlignTrailing|QtCore.Qt.AlignVCenter)
self.lineEdit_3.setObjectName("lineEdit_3")
self.dw = QtWidgets.QLabel(Form)
self.dw.setGeometry(QtCore.QRect(420, 390, 54, 20))
self.dw.setObjectName("dw")
self.verticalGroupBox.raise_()
self.verticalGroupBox_2.raise_()
self.formGroupBox.raise_()
self.s3__send_button.raise_()
self.s3__clear_button.raise_()
self.formGroupBox.raise_()
self.hex_send.raise_()
self.hex_receive.raise_()
self.s2__clear_button.raise_()
self.timer_send_cb.raise_()
self.lineEdit_3.raise_()
self.dw.raise_()
self.retranslateUi(Form)
QtCore.QMetaObject.connectSlotsByName(Form)
def retranslateUi(self, Form):
_translate = QtCore.QCoreApplication.translate
Form.setWindowTitle(_translate("Form", "Form"))
self.formGroupBox.setTitle(_translate("Form", "串口设置"))
self.s1__lb_1.setText(_translate("Form", "串口检测："))
self.s1__box_1.setText(_translate("Form", "检测串口"))
self.s1__lb_2.setText(_translate("Form", "串口选择："))
self.s1__lb_3.setText(_translate("Form", "波特率："))
self.s1__box_3.setItemText(0, _translate("Form", "115200"))
self.s1__box_3.setItemText(1, _translate("Form", "2400"))
self.s1__box_3.setItemText(2, _translate("Form", "4800"))
self.s1__box_3.setItemText(3, _translate("Form", "9600"))
self.s1__box_3.setItemText(4, _translate("Form", "14400"))
self.s1__box_3.setItemText(5, _translate("Form", "19200"))
self.s1__box_3.setItemText(6, _translate("Form", "38400"))
self.s1__box_3.setItemText(7, _translate("Form", "57600"))
self.s1__box_3.setItemText(8, _translate("Form", "76800"))
self.s1__box_3.setItemText(9, _translate("Form", "12800"))
self.s1__box_3.setItemText(10, _translate("Form", "230400"))
self.s1__box_3.setItemText(11, _translate("Form", "460800"))
self.s1__lb_4.setText(_translate("Form", "数据位："))
self.s1__box_4.setItemText(0, _translate("Form", "8"))
self.s1__box_4.setItemText(1, _translate("Form", "7"))
self.s1__box_4.setItemText(2, _translate("Form", "6"))
self.s1__box_4.setItemText(3, _translate("Form", "5"))
self.s1__lb_5.setText(_translate("Form", "校验位："))
self.s1__box_5.setItemText(0, _translate("Form", "N"))
self.open_button.setText(_translate("Form", "打开串口"))
self.close_button.setText(_translate("Form", "关闭串口"))
self.s1__lb_6.setText(_translate("Form", "停止位："))
self.s1__box_6.setItemText(0, _translate("Form", "1"))
self.verticalGroupBox.setTitle(_translate("Form", "接受区"))
self.verticalGroupBox_2.setTitle(_translate("Form", "发送区"))
self.s3__send_text.setHtml(_translate("Form", "\n"
"\n"
"
123456
")) self.s3__send_button.setText(_translate("Form", "发送")) self.s3__clear_button.setText(_translate("Form", "清除")) self.formGroupBox1.setTitle(_translate("Form", "串口状态")) self.label.setText(_translate("Form", "已接收：")) self.label_2.setText(_translate("Form", "已发送：")) self.hex_send.setText(_translate("Form", "Hex发送")) self.hex_receive.setText(_translate("Form", "Hex接收")) self.s2__clear_button.setText(_translate("Form", "清除")) self.timer_send_cb.setText(_translate("Form", "定时发送")) self.lineEdit_3.setText(_translate("Form", "1000")) self.dw.setText(_translate("Form", "ms/次")) 以上这篇使用Python3+PyQT5+Pyserial 实现简单的串口工具方法就是小编分享给大家的全部内容了，希望能给大家一个参 考，也希望大家多多支持软件开发网。 您可能感兴趣的文章:Python使用pyserial进行串口通信的实例Python socket实现的简单通信功能示例Python网络编程使用 您可能感兴趣的文章 select实现socket全双工异步通信功能示例python多进程实现进程间通信实例Python中的FTP通信模块ftplib的用法整理Python 多进程通信Queue、Pipe、Value、Array实例Python通过websocket与js客户端通信示例分析Python实现串口通信 （pyserial）过程解析相关推荐
2023年江西萍乡中考道德与法治真题及答案.doc
2012年重庆南川中考生物真题及答案.doc
2013年江西师范大学地理学综合及文艺理论基础考研真题.doc
2020年四川甘孜小升初语文真题及答案I卷.doc
2020年注册岩土工程师专业基础考试真题及答案.doc
2023-2024学年福建省厦门市九年级上学期数学月考试题及答案.doc
2021-2022学年辽宁省沈阳市大东区九年级上学期语文期末试题及答案.doc
2022-2023学年北京东城区初三第一学期物理期末试卷及答案.doc
2018上半年江西教师资格初中地理学科知识与教学能力真题及答案.doc
2012年河北国家公务员申论考试真题及答案-省级.doc
2020-2021学年江苏省扬州市江都区邵樊片九年级上学期数学第一次质量检测试题及答案.doc
2022下半年黑龙江教师资格证中学综合素质真题及答案.doc
