技嘉移动电话-GSmart Classic Lite说明书.pdf-资料库

GSmart Classic Lite User Manual Classic Lite｜0

Copyright All mobile products by GIGA-BYTE COMMUNICATIONS INC. mentioned in this document, including the device, accessories, software, text, music, and pictures, are owned by, or authorized by original manufacturers to GIGA-BYTE COMMUNICATIONS INC. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the prior written permission of GIGA-BYTE COMMUNICATIONS INC. is prohibited. GIGA-BYTE COMMUNICATIONS INC. Classic Lite｜1

General Information This section contains important information on safe and efficient operation. Please read this information before using the device. Ignorance of the following notices may lead to violations of the law.  Before using the device, please make sure you have fully charged the battery.  Do NOT remove the battery from the device during charging.  Before inserting SIM card into the device, make sure that the device is switched off.  Keep the battery in low battery status for long time might cause battery over-discharged or even reduce battery life. To maintain battery in good lifecycle please recharges it once in low battery.  Please fully charge the battery if you are going to leave the phone without use for long time to prevent battery goes over-discharged.  Do NOT attempt to dissemble the device on your own. This should be done by an authorized person.  Use the device in accordance to instructions when in public facilities.  In some countries, it is a violation against the law to record phone conversations. Always ask permission of the other party when you are going to record a conversation.  To protect your ears, turn down the volume before you use stereo headsets or other audio devices.  To avoid damaging the touch screen and the device, do NOT apply excessive pressure on them, and remove the device from your pants’ pocket before you sit down. It is also recommended that you only use the stylus or your finger to interact with the touch screen. It is not covered by the warranty that you crack the touch screen because of the improper usage.  When you use the device for a long time, such as talking on the phone, browsing online, or charging the battery, the device may become warm. In most cases, this condition is normal.  Refer servicing to the provider, or an authorized technician under the following conditions: 1. The device has been damaged. 2. When you follow the instructions to use your device, it does not operate normally. 3. The device has been exposed to water. 4. Liquid has been spilled or an object has fallen onto the device.  Do NOT push unauthorized objects into slots and openings in your device.  The device should be placed away from heat sources such as stoves, radiators, heat registers, or other products that produce heat.  Condensation may form on or within your device, when you move your device between environments with very different temperature and/or humidity ranges. To avoid damaging your device, make the moisture to evaporate before you use the device.  To avoid damaging your device, do NOT put your device on an unstable table, stand, bracket, or other places.  Before you clean your device, unplug it, please. Use a damp cloth for cleaning, but do NOT use water, liquid cleaners, or aerosol cleaners to clean the touch screen. Classic Lite｜2

Table of Contents Copyright General Information 1. Getting Started 1.1 Your Phone 1.2 Installing or uninstalling the SIM Card, Battery, and Memory Card 1.3 Charging the Battery 1.4 Turning the Phone On or Off 2. Basic 2.1 The Home Screen 2.2 Contacts 2.3 Phone Lock/Unlock 2.4 Personalization 2.5 Time Management 3. Phone Calls & Messages 3.1 Voice & Video Calls 3.2 Creating and sending a text message 3.3 Multimedia Message 4. Wi-Fi & Bluetooth 4.1 Wi-Fi 4.2 Bluetooth 5. Multimedia Applications 5.1 Camera 5.2 Music 6. Pre-Installed Programs Introduction 7. Managing Your Phone 7.1 Protecting Your Phone 7.2 Backup or Reset Your Phone 8. Specifications 1 2 4 4 4 6 6 7 7 9 9 10 11 12 12 13 14 14 14 15 16 16 17 18 19 19 19 20 Classic Lite｜3

1. Getting Stared 1.1 Your Phone This section introduces you to the hardware of the device. No items Earphone Jack Micro-USB Port Receiver Front Camera Display & Touch Screen Overview Home 1 2 3 4 5 6 7 No 8 9 10 11 12 13 14 Items Back Volume Key Power Key Camera Flash LED Battery Cover Speaker 1.2 Installing or uninstalling the SIM Card, Battery, and Memory Card To install the SIM card There are two SIM card slots. The right slot is SIM1 (to use with Micro SIM card) and left slot is SIM2 (to use with Mini SIM card). To install the SIM1 card To install the SIM2 card Classic Lite｜4

To remove the SIM card Please turn off your phone first, and use your finger to slide the SIM card out of card slot. NOTE: SIM Card Data Switch 3G (GSM+WCDMA) is set in SIM1 by default however switchable to SIM2 by manual setup. SIM1 Default Setting GSM+WCDMA SIM2 GSM User Switchable GSM GSM+WCDMA Tap Applications tab > More… > Mobile networks > 3G service > Enable 3G. Choose one SIM card for WCDMA+GSM, then the other one will be for GSM automatically. If you insert single SIM card, the default setting will be set up as GSM+WCDMA. SIM1 SIM1 inserted GSM+WCDMA SIM2 X SIM2 inserted X GSM+WCDMA Data ON/OFF Switch > SIM management > Data connection. Choose the same Tap Applications tab > SIM card as 3G (GSM+WCDMA) SIM card. Battery Your phone comes with a rechargeable battery. Battery life may vary depending on the availability of local networks and the individual usage. To install the battery Make sure the contact of the battery is close to connectors in the battery slot. To remove the battery Use your fingertip to lift the battery, and then remove it. To replace the back cover (1) Insert the cover into the slot from the bottom. (2) Then, press all around back cover fully until hearing clicks. Memory card You may need a micro SD card to store photos, music, videos and other data. Classic Lite｜5

To install the memory card To remove the memory card (1) For safe removal, tap Applications tab > Settings > Storage > Unmount SD card > OK. (2) Push the memory card to eject it from the slot. 1.3 Charging the Battery Your battery has been partially charged at the factory, but you may need to recharge it before you can switch on your phone for the first time. (1) Connect the USB cable to the AC adapter, and then, connect to the device via the USB cable. (2) Plug the AC adapter to a socket to start charging. (3) For safety, please only use the original charger that comes with your device. Any possible damage caused by using non-original charger or any other equipment will not be under GIGABYTE Communication Inc.’s liability. NOTE: To ensure safety, do not remove the battery from the phone while the AC adapter is connected or while it is being charged. 1.4 Turning the Phone on or off To turn on your phone Press and hold the power button until the display appears “GSmart” logo. To turn off your phone (1) Press and hold the power button for several seconds. (2) A pop-up window appears, then tap “Power off”. (3) Select “OK” to confirm. Classic Lite｜6

2. Basic 2.1 The Home Screen On Home Screen, you can quickly access common features and view notifications of missed calls, received messages, battery, and the status of the connection. Default Home Screen: Main functions. Icons Descriptions Favorites Tray can keep your most important shortcuts and folders. Tap to launch Application Drawer. You can slide the Home Screen from the left side to the right side or from the right side to the left side to switch it. The icons located at the bottom of the home page have different functions: Self-defined Home Screen: You can add the shortcuts and widgets. Icons Functions Enable/disable Wi-Fi. Enable/disable Bluetooth. Enable/disable Google Location service. Enable/disable Data Synchronization. Tap to adjust the brightness. Classic Lite｜7

资料库

技嘉移动电话-GSmart Classic Lite说明书.pdf

相关推荐

移动电话

热门标签

最新资料