The N-TRON ® 716TX Industrial Ethernet Switch combines outstanding performance and ease of use. It is ideally suited for con- necting Ethernet enabled industrial and/or security equipment and is a fully managed switch. PRODUCT FEATURES • Sixteen 10/100BaseTX RJ-45 Ports • -40oC to 85oC Operating temperature • ESD and Surge Protection Diodes on all Ports • Auto Sensing 10/100BaseTX, Duplex, and MDIX • Store-and-forward Technology • Rugged DIN-Rail Enclosure • Redundant Power Inputs (10-30VDC) • High Voltage Option (110VDC) • Configurable Alarm Contact & Bi-Color Fault Status LED Fully Managed Features: • SNMP v1, v2, v3 and Web Browser Management • Detailed Ring Map and Fault Location Charting • N-Ring™ Technology with ~30ms Healing • N-View™ OPC Monitoring • N-Discover™ Utility Discovers IP and MAC addresses of devices on the network • N-Link™ Redundant N-Ring Coupling • Plug-and-play IGMP Support • 802.1Q tag VLAN and Port VLAN • 802.1p QoS and Port QoS • Port Trunking • Port Mirroring • 802.1d, 802.1w, 802.1D RSTP • DHCP Server, Option 82 relay Management Features The 716TX offers several management functions that can be easily configured using a Web Browser. IGMP Snooping - Internet Group Management Protocol is a feature that allows the 716TX switch to forward and filter multicast traffic intelligently. VLAN - Virtual Local Area Network allows you to segment the switch in order to create two or more separate local area network domains. QoS - Quality of Service provides prioritization of network traffic in order to provide better network service. The primary goal of QoS is to improve the latency of prioritized Ethernet packets required for ring management, real-time, and other interactive applications. Port Trunking - Trunking (Link Aggregation) enables multiple physical ports to be linked together and function as one uplink to another N-TRON trunking capable switch configured in the same manner, thereby increasing the bandwidth between switches. This configuration can provide increased bandwidth and redundancy to applications requiring high levels of fault tolerant operation. Port Mirroring - This function allows the traffic on one port to be duplicated and sent to a designated mirror port. Port mirroring can be used to monitor Ethernet traffic on the designated source port using the assigned mirror port. DHCP-DHCP Server / Client automates the assignment of IP addresses. DHCP Option 82 assures that if a device on a specific port is replaced, the replacement receives the same IP address as the original device. Rapid Spanning Tree Protocol - RSTP allows the switch to be configured in a Ring or Mesh topology, and provides support for redundant path communications with high speed (rapid) healing. Remote Monitoring Options For ease of configuration and monitoring, the 716TX offers Web Browser Management and N-View OLE for Process Control (OPC) Server Software. The N-TRON N-View Software can be combined with popular HMI software packages to add network traffic monitoring, trending, and alarming to any application using N-TRON switches. N-Discover™ automatically discovers MAC and IP addresses of other network devices. In addition SNMP is available for switch link and status monitoring. The Alarm Contact and Status LED can be configured to respond to power failure on power input 1 or input 2, N-Ring Broken, Partial Break High, Partial Break Low, or if multiple Ring managers are detected. N-Ring Technology N-TRON's 716TX Ring Manager using N-TRON's N-Ring technology offers expanded ring size capacity, detailed fault diagnostics, and a standard healing time of ~30ms. The 716TX Ring Manager periodically checks the health of the Ring via packets. If the Ring Manager stops receiving these health check packets, it converts the Ring to a linear topology within ~30ms. In addition to standard Ring Manager protocol, when using all N-TRON fully managed switches in the ring, a detailed ring map and fault location chart will also be provided on the Ring Manager’s web browser and OPC Server to identfy the health status of the ring. N-Link allows the linking of two N-Rings. Up to 250 fully managed N-TRON switches can participate in N-Ring topologies. Industrial Packaging and Specifications The 716TX is designed to operate in industrial environments. It is housed in a rugged steel DIN-Rail enclosure. It has extended industrial specifications and features to meet or exceed the operating parameters of the connected equipment. These include extended temperature ratings, extended shock and vibration specs, redundant power inputs, and high MTBF (greater than 2M hours). Ease of Use The 10/100BaseTX ports are auto sensing and auto configur- ing. Each copper port is automatically negotiated for maxi- mum speed and performance by default, but can also be hard coded using the user interface. A high speed processor allows wire speed capability on all 100BaseTX ports simultaneously. 

716TX Industrial Ethernet Switch Ordering Information 716TX 716TX-HV 700-PM 900-RM NTPS-24-1.3 Sixteen 10/100BaseTX Ports Sixteen 10/100BaseTX Ports - High Voltage option Panel Mount kit Universal Rack Mount Kit N-TRON Power Supply - (1.3 Amp @ 24VDC) Specifications Switch Properties Number of MAC Addresses: 8000 Aging Time: Latency Typical: Switching Method: Programmable 2.6 μs Store-and-Forward Physical 2.29" Height: Width: 8.56" Depth (incl. DIN rail mount): 5.28" Weight (max): DIN-Rail Mount: 3.26 lbs 35mm (5.82 cm) (21.74 cm) (13.41 cm) (1.48 kg) -HV option: Electrical Redundant Input Voltage: Input Current (max): -HV Option: N-TRON Power Supply: 10-30 VDC (Regulated) 110VDC (Regulated) 520mA max. @ 24VDC 180mA max. @ 110VDC NTPS-24-1.3 (1.3A@24V) Environmental Operating Temperature: Storage Temperature: Operating Humidity: Operating Altitude: -40oC to 85oC -40oC to 85oC 5% to 95% (Non Condensing) 0 to 10,000 ft. Shock and Vibration (bulkhead mounted) Shock: 200g @ 10ms 50g, 5-200Hz, Triaxial Vibration/Seismic: Reliability MTBF: >2 Million Hours Network Media 10BaseT: 100BaseTX: >Cat3 Cable >Cat5 Cable Connectors 10/100BaseTX: Sixteen (16) RJ-45 Copper Ports Recommended Wiring Clearance Front: Side: 4" 1" (10.16 cm) (2.54 cm) Regulatory Approvals FCC Title 47, Part 15, Subpart B - Class A CE: EN61000-6-2; EN50155: 2007 Railway; EN55022: 2006; EN61000-4-2, 3, 4, 5, 6 ATEX Zone 2, Category 3G, II 3G Ex nC IIC (DEMKO 03 ATEX 0316686U) GOST-R Certified, RoHS Compliant ABS certified for Marine, Offshore, and Industrial Network applicaitons Designed to comply with: UL Listed ANSI/ISA-12.12.01-2000 (US and Canada) Class I, Div 2, Groups A, B, C, D, and T4A ICES-003 - Class A IEEE 1613 for Electric Utility Substations NEMA TS1/ TS2 for Traffic control Contact Information N-TRON Corp. N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 Mobile, AL 36609 USA TEL: (251) 342-2164 FAX: (251) 342-6353 Website: www.n-tron.com Email: N-TRON_info@n-tron.com TEL: +41 41 7406636 FAX: +41 41 7406637 6330 Cham / Zg Switzerland ® 2008 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice. Printed in USA. REV 081222