Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
Published November 2004
Copyright©2004 ASRock INC. All rights reserved.
ASRock P4i65PE-M Motherboard
11111
Motherboard L
Motherboard L
ayout
ayout
Motherboard Layout
ayout
Motherboard L
Motherboard L
ayout
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PS2_USB_PWR1 Jumper
ATX 12V Connector (ATX12V1)
CPU Socket
CPU Fan Connector (CPU_FAN1)
CPU Heatsink Retention Module
184-pin DDR DIMM Slots (DDR1- 2)
Secondary IDE Connector (IDE2, Black)
Primary IDE Connector (IDE1, Blue)
North Bridge Controller
AGP Slot (1.5V_AGP1)
South Bridge Controller
USB 2.0 Header (USB67, Blue)
Secondary Serial ATA Connector (SATA2)
Primary Serial ATA Connector (SATA1)
System Panel Header (PANEL1)
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Chassis Speaker Header (SPEAKER 1)
Chassis Fan Connector (CHA_FAN1)
Clear CMOS Jumper (CLRCMOS0)
Infrared Module Header (IR1)
Floppy Connector (FLOPPY1)
Game Port Connector (GAME1)
Internal Audio Connector: AUX1 (White)
Internal Audio Connector: CD1 (Black)
JR1 / JL1 Jumpers
Front Panel Audio Header (AUDIO1)
PCI Slots (PCI1- 3)
Shared USB 2.0 Header (USB4_5, Blue)
BIOS FWH Chip
ATX Power Connector (ATXPWR1)
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
22222
ASRock P4i65PE-M Motherboard
ASRock I/O Plus
ASRock I/O Plus
ASRock I/O PlusTMTMTMTMTM
ASRock I/O Plus
ASRock I/O Plus
1
2
3
4
5
6
Parallel Port
RJ-45 Port
Line In (Light Blue)
Line Out (Lime)
Microphone (Pink)
Shared USB 2.0 Ports (USB45)
7
8
9
10
11
USB 2.0 Ports (USB01)
USB 2.0 Ports (USB23)
Serial Port: COM1
PS/2 Keyboard Port (Purple)
PS/2 Mouse Port (Green)
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
ASRock P4i65PE-M Motherboard
33333
1. Introduction
1. Introduction
1. Introduction
1. Introduction
1. Introduction
Thank you for purchasing ASRock P4i65PE-M motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality and
endurance.
This Quick Installation Guide contains introduction of the motherboard and step-by-
step installation guide. More detailed information of the motherboard can be found in
the user manual presented in the Support CD.
Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest memory and CPU support lists on ASRock website as
well. ASRock website http://www.asrock.com
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
ASRock P4i65PE-M Motherboard
(Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm)
ASRock P4i65PE-M Quick Installation Guide
ASRock P4i65PE-M Support CD
One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable
One Ribbon Cable for a 3.5-in Floppy Drive
One Serial ATA (SATA) Data Cable
One Serial ATA (SATA) HDD Power Cable (Optional)
One ASRock I/O PlusTM Shield
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
44444
ASRock P4i65PE-M Motherboard
Chipsets:
Memory:
IDE:
Serial ATA:
Intel® 865PE chipset, FSB @ 800 / 533 / 400MHz,
supports Hyper-Threading Technology (see CAUTION 1)
South Bridge:
Intel® ICH5, supports SATA 1.5Gb/s
2 DDR DIMM Slots: DDR1 and DDR2
2 DDR DIMM Slots Supports PC3200 (DDR400) / PC2700
(DDR333) / PC2100 (DDR266), Max. 2GB
(see CAUTION 2)
Dual Channel Memory Technology support (see CAUTION 3)
IDE1: ATA 100 / Ultra DMA Mode 5
IDE2: ATA 100 / Ultra DMA Mode 5
Supports up to 4 IDE devices
Supports up to 2 SATA devices at 1.5Gb/s data transfer rate
(Not Support “RAID and “Hot Plug” functions)
Supports up to 2 floppy disk drives
5.1 channels AC’97 Audio
Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN
1.2 Specifications
1.2 Specifications
1.2 Specifications
1.2 Specifications
1.2 Specifications
Platform:
CPU:
Micro ATX Form Factor: 9.6-in x 7.8-in, 24.4 cm x 19.8 cm
Socket 478, supports Intel® Pentium® 4 / Celeron® (Prescott,
Northwood, Willamatte) processor
North Bridge:
Floppy Port:
Audio:
PCI LAN:
Hardware Monitor: CPU temperature sensing,
Chassis temperature sensing,
CPU overheat shutdown to protect CPU life
(ASRock U-COP)(see CAUTION 4),
CPU fan tachometer,
Chassis fan tachometer,
Voltage monitoring: +12V, +5V, +3.3V, Vcore
3 PCI slots with PCI Specification 2.3
1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 5)
8 USB 2.0 ports:
includes 6 default USB 2.0 ports on the rear panel,
plus two headers to support 2 additional USB 2.0 ports
(see CAUTION 6)
ASRock I/O PlusTM: 1 PS/2 mouse port,
PCI slots:
AGP slot:
USB 2.0:
1 PS/2 keyboard port,
1 serial port: COM1,
1 parallel port: ECP/EPP support,
6 default USB 2.0 ports,
1 RJ 45 port,
Audio Jack: Line In / Line Out / Microphone
ASRock P4i65PE-M Motherboard
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
55555
BIOS:
OS:
AMI legal BIOS,
Supports “Plug and Play”,
ACPI 1.1 compliance wake up events,
Supports jumperfree,
CPU frequency stepless control
(only for advanced users’ reference, see CAUTION 7)
Microsoft® Windows® 98 SE / ME / 2000 / XP compliant
CAUTION!
1. About the setting of “Hyper Threading Technology”, please check page 22
of “User Manual” in the Support CD.
2. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
Memory Support Frequency
800
533
400
DDR266, DDR320*, DDR400
DDR266, DDR333
DDR266
* When you use an FSB800-CPU on this motherboard, it will run at
DDR320 if you adopt a DDR333 memory module.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 8 for proper installation.
4. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
5. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
6. Power Management for USB 2.0 works fine under Microsoft® Windows® XP
SP1 / 2000 SP4. It may not work properly under Microsoft® Windows® 98/
ME.
7. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
66666
ASRock P4i65PE-M Motherboard
2. Installation
2. Installation
2. Installation
2. Installation
2. Installation
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet
or the like. Also remember to use a grounded wrist strap or touch
a safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded
antstatic pad or in the bag that comes with the component.
CPU Installation
CPU Installation
2.12.12.12.12.1 CPU Installation
CPU Installation
CPU Installation
Step 1. Unlock the socket by lifting the lever up to a 90o angle.
Step 2. Position the CPU directly above the socket such that its marked corner
matches the base of the socket lever.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push down
the socket lever to secure the CPU. The lever clicks on the side tab to
indicate that it is locked.
Install CPU fan and heatsink. For proper installation, please kindly refer to
the instruction manuals of your CPU fan and heatsink vendors.
Step 5.
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
ASRock P4i65PE-M Motherboard
77777
2.22.22.22.22.2 Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
Installation of Memory Modules (DIMM)
P4i65PE-M motherboard provides two 184-pin DDR (Double Data Rate) DIMM slots.
Please make sure to disconnect power supply before adding or
removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.
Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
The DIMM only fits in one correct orientation. It will cause permanent
damage to the motherboard and the DIMM if you force the DIMM into
the slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully
snap back in place and the DIMM is properly seated.
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
88888
ASRock P4i65PE-M Motherboard