DC-M50
digital camera
user's guide
SYSTEM REQUIREMETS WINDOWS
Windowsfi98 / 98 SE / Windowsfi2000 Prof./ Windowsfi Me / WindowsfiXP
32 MB RAM
110 MB free memory capacity
VGA color monitor
CD ROM drive
USB
SYSTEM REQUIREMETS
IMac,iBook,G3 blue&white series,G4 series
MacOS 9.0~10.1.3
64 MB RAM or higher
110 MB free memory capacity
VGA color monitor
CD ROM drive
USB
Take the time to read through this instruction manual so you can enjoy all your
cameras features.
Canada
Industry Canada (IC)
Unintentional emitter per ICES-003 / NMB-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le prØsent appareil numØrique n’Ømet pas de bruits radioØlectriques dØpassant les limites
applicables aux appareils numØriques de Classe B prescrites dans le rŁglement sur le brouillage
radioØlectrique ØdictØ par Industrie Canada.
3
Regulatory compliance statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference to
radio and television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment to an outlet on a different circuit from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help.
4
Compliance Accessories: The compliance accessories associated with this equipment are shipped
with it. These accessories are required to be used in order to ensure compliance with FCC rules.
Do not remove the ferrite cores from the cables.
FCC declaration of conformity
Responsible party:
Gateway Companies, Inc.
610 Gateway Drive, North Sioux City, SD 57049
(605) 232-2000 Fax: (605) 232-2023
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
5
Digital Camera
DC-M50
Tested To Comply
With FCC
Standards
FOR HOME OR OFFICE USE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference recieved, including interference that
may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Do not remove the ferrite cores from the cables.
Caution
Changes or modifications not expressly approved by Gateway could void the FCC compliance and
negate your authority to operate the product.
6
FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
This is a descriptive statement that warns of the result if the instructions are
ignored or not understood.
WARNING
Batteries may become hot or explode due to improper use.
Use only the batteries specified in this instruction manual.
Do not install the batteries with the polarity (+/-) reversed.
Do not attempt to recharge, short, or disassemble.
Do not mix batteries of different types, brands, ages or charge levels.
Follow local regulations for battery disposal.
Use caution, accidents may occur when using this product near young children. Keep batteries or
things that could be swallowed away from young children. Contact a doctor immediately if an object
is swallowed. Immediately remove the batteries and discontinue use if:
The camera is dropped or subjected to an impact in which the interior is exposed.
The product emits a strange smell, heat, or smoke.
Do not walk while looking at the monitor.
Do not disassemble. Electric shock may occur if a high voltage circuit inside
the camera is touched.
Do not use batteries which show wear or damaged.
Do not expose batteries to fire, high temperature environment, water or moist places.
Do not store the batteries nearby metalic products.
7
Never charge alkaline batteries.
Do not use leaking batteries. If fluid from the batteries gets in your eyes, immediately rinse eyes
with lots of fresh water and contact the doctor.If fluid from the batteries makes contact with your
skin or clothing, wash the area thoroughly.
Do not fire the flash directly into the eyes or at vehicle operators. It may cause eyesight injury or
cause an accident.
Do not use the camera in a humid environment, or operate with wet hands. If any liquid flows into
the camera, immediately remove the power supply (including batteries and adapter) and
discontinue use. Or it may cause electric shock.
Do not use the camera near flammable gases or liquids or use them to clean the camera like
gasoline,benzine,or paint thinner. Or it may cause an explosion or fire.
Do not just pull on the power cord while unplugging from the outlet on the wall. Holding the adapter
Do not continue to use if the camera has an odor, or smoke. Immediately remove the power supply
plug unit is recommend.
taking care not to burn yourself.
Contact Gateway when repairs are required.
8