Preface
Copyright
This publication, including all photographs, illustrations and software, is protected
under international copyright laws, with all rights reserved. Neither this manual, nor
any of the material contained herein, may be reproduced without written consent of
the author.
Version 1.0A
Disclaimer
The information in this document is subject to change without notice. The manufac-
turer makes no representations or warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. The manufacturer reserves the right to revise this publication and
to make changes from time to time in the content hereof without obligation of the
manufacturer to notify any person of such revision or changes.
Trademark Recognition
Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corp.
AMD, Athlon, Sempron, and Duron are registered trademarks of AMD Corporation.
Other product names used in this manual are the properties of their respective
owners and are acknowledged.
Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and the receiver
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Shielded interconnect cables and a shielded AC power cable must be employed with
this equipment to ensure compliance with the pertinent RF emission limits governing
this device. Changes or modifications not expressly approved by the system’s manu-
facturer could void the user’s authority to operate the equipment.
Preface
ii
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
•
•
This device may not cause harmful interference, and
This device must accept any interference received, including interfer-
ence that may cause undesired operation
Canadian Department of Communications
This class B digital apparatus meets all requirements of the Canadian Interference-
causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur
le matériel brouilieur du Canada.
About the Manual
The manual consists of the following:
Chapter 1
Introducing the Motherboard
Chapter 2
Installing the Motherboard
Chapter 3
Using BIOS
Chapter 4
Using the Motherboard Software
Chapter 5
Setting Up NVIDIA RAID Configuration
Chapter 6
NVIDIA®®®®® Hybrid SLI®®®®® Technology Support
Preface
Describes features of the
motherboard.
Go to page 1
Describes installation of
motherboard components.
Go to page 7
Provides information on us-
ing the BIOS Setup Utility.
Go to page 29
Describes the motherboard
software
Go to page 47
Provides information about
SATA RAID Setup
Go to page 57
Provides information about
SATA RAID Setup
Go to page 67
iii
Preface
Chapter 1
Introducing the Motherboard
TTTTTABLE OF CONTENTS
ABLE OF CONTENTS
ABLE OF CONTENTS
ABLE OF CONTENTS
ABLE OF CONTENTS
i
1
1
Introduction......................................................................................1
Feature ..............................................................................................2
Motherboard Components.............................................................5
7 7 7 7 7
Chapter 2
Installing the Motherboard 7
Safety Precautions...........................................................................7
Choosing a Computer Case............................................................7
Installing the Motherboard in a Case............................................7
Checking Jumper Settings...............................................................8
Setting Jumpers...................................................................8
Checking Jumper Settings...................................................9
Jumper Settings...................................................................9
Connecting Case Components.....................................................10
Front Panel Header...........................................................12
Installing Hardware........................................................................13
Installing the Processor.....................................................13
Installing Memory Modules...............................................14
Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive...19
Installing a Floppy Diskette Drive....................................20
Installing Add-on Cards....................................................21
Connecting Optional Devices............................................23
Connecting I/O Devices................................................................26
Chapter 3
Using BIOS
29
29
About the Setup Utility................................................................ 29
The Standard Configuration..............................................29
Entering the Setup Utility...................................................29
Updating the BIOS............................................................31
Using BIOS......................................................................................31
Standard CMOS Setup......................................................32
Advanced Setup.................................................................34
Advanced Chipset Setup....................................................36
iv
Integrated Peripherals.......................................................37
Power Management Setup.................................................38
PCI/PNP Configuration.....................................................40
PC Health Status................................................................41
M.I.B (MB Intelligent BIOS)..............................................42
Load Default Settings.......................................................45
Supervisor Password........................................................45
User Password..................................................................46
Save & Exit Setup..............................................................46
Exit Without Saving............................................................46
Chapter 4
Using the Motherboard Software
47 47 47 47 47
47
About the Software CD-ROM...............................................................47
Auto-installing under Windows XP/Vista..................................47
Running Setup....................................................................48
Manual Installation........................................................................52
Utility Software Reference............................................................52
HDMI Audio setting SOP.............................................................53
Chapter 5
Setting Up NVIDIA RAID Configuration
57 57 57 57 57
57
Setting Up a Non-Bootable RAID Array....................................57
Setting Up a Bootable RAID Array............................................59
Chapter 6
NVIDIA®®®®® Hybrid SLI®®®®® Technology Support
67 67 67 67 67
67
Key Features...................................................................................67
Hybrid SLI Products......................................................................68
Hybrid Requirements and Constraints.......................................69
Installation and Use.......................................................................70
1
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the GF8200A motherboard. This motherboard is a high
performance, enhanced function motherboard that supports socket for AMD
PhenomTM processor (socket AM2+)/AMD AthlonTM 64 X2 Dual-Core/AthlonTM 64/
SempronTM processors for high-end business or personal desktop markets.
This motherboard is based on NVIDIA® GeForce8200 (MCP78S) Premium media and
communications processor (MCP) for best desktop platform solution. GeForce8200
is a single-chip, highly integrated, high performance HyperTransport peripheral
controller, unmatched by any other single chip-device controller. The memory con-
troller supports DDR2 memory DIMM frequencies of 1066*1 (AM2+)/800/667/533/
400. It supports four DDR2 sockets with maximum memory size of 32 GB*2. High
resolution graphics via one PCI Express x16 slot, two PCI Express x1 slots, 12 USB
2.0 ports (6 USB ports and 3 USB 2.0 headers support additional 6 USB ports) and
SATA support with RAID function.
There is an advanced full set of I/O ports in the rear panel, including PS/2 mouse and
keyboard connectors, one VGA port, one HDMI port, one eSATA port, six USB
ports, one LAN port and audio jacks for microphone, line-in and 6/8-ch (optional)
line-out. This motherboard is designed in an ATX form factor using a four-layer
printed circuit board and measures 305 mm x 220 mm.
*
1. Due to the limitation of AMD CPU spec, please refer to Memory QVL
for more information.
2. Due to the DRAM maximum size (2 GB per dimm) at present, the
memory maximum size we have tested is 8 GB.
Introducing the Motherboard
2
Feature
Processor
This motherboard uses a socket AM2+/AM2 that carries the following features:
Accommodates AMD PhenomTM processor (socket AM2+)
AMD AthlonTM 64 X2 Dual-Core/AthlonTM 64/SempronTM processors
Supports HyperTransportTM (HT) 3.0 interface speeds
•
•
HyperTransportTM Technology is a point-to-point link between two devices, it
enables integrated circuits to exchange information at much higher speeds than
currently available interconnect technologies.
This board supports CPU up to 95W TDP only.
Chipset
The NVIDIA® GeForce8200 is a single-chip with proven reliability and perfor-
mance.
•
•
•
•
•
•
•
•
•
•
•
HyperTransport 3.0 x16 up and down links to the AMD socket AM2+/
AM2 CPU
PCI Express 16-lane link interface for external graphics processors
PCI Express Generation 2.0 compatible
Integrated NVIDIA GeForce® Series DirectX 10 Vertex Shader 4.0 graph-
ics processor
Compliant with PCI v2.3 interface at 33 MHz
Integrated SATA 3.0 Gb/s Host Controller
Twelve USB 2.0 ports supported
Fast ATA-133 IDE controller
NVIDIA® MediaShieldTM RAID with support for RAID 0, RAID 1, RAID 0+1,
RAID 5, and JBOD
NVIDIA® PureVideo® HD video supported
Integrated Hybrid SLI technology, NVIDIA® UltraShadowTM technology,
full NVIDIA® nView® multi-display technology capability
There are three Hybrid SLI modes for you to select: Save Power,
Boost Performance and Additional Displays.
Memory
•
•
•
Supports DDR2 1066 (AM2+)/800/667/533/400 DDR2 SDRAM with Dual-
channel architecture
Accommodates four unbuffered DIMMs
Up to 8 GB per DIMM with maximum memory size up to 32 GB*
Introducing the Motherboard