Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
Published July 2005
Copyright©2005 ASRock INC. All rights reserved.
ASRock K8NF4G-SATA2 Motherboard
11111
Motherboard L
Motherboard L
ayout
ayout
Motherboard Layout
ayout
Motherboard L
Motherboard L
ayout
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
PS2_USB_PW1 Jumper
18
ATX 12V Power Connector (ATX12V1)
19
754-Pin CPU Socket
20
CPU Heatsink Retention Module
21
184-pin DDR DIMM Slots (DDR1- 2)
22
Secondary IDE Connector (IDE2, Black)
23
Primary IDE Connector (IDE1, Blue)
24
North Bridge Controller
25
PCI Express Slot (PCIE1)
26
South Bridge Controller
Clear CMOS Jumper (CLRCMOS2)
27
Secondary Serial ATAII Connector (SATAII_2, red) 28
29
Primary Serial ATAII Connector (SATAII_1, red)
30
Chassis Fan Connector (CHA_FAN1)
System Panel Header (PANEL1)
31
Chassis Speaker Header (SPEAKER 1)
USB 2.0 Header (USB67, Blue)
Infrared Module Header (IR1)
USB 2.0 Header (USB45, Blue)
Floppy Connector (FLOPPY1)
Flash Memory
Game Port Header (GAME1)
PCI Express Slot (PCIE2)
AMR Slot (AMR1)
JR1 JL1 Jumper
Front Panel Audio Header (AUDIO1)
2 x PCI Slots (PCI1- 2)
Internal Audio Connector: CD1 (Black)
ATX Power Connector (ATXPWR1)
Serial Port Connector (COM1)
CPU Fan Connector (CPU_FAN1)
22222
ASRock K8NF4G-SATA2 Motherboard
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
1
2
3
4
5
6
*7
Parallel Port
RJ-45 Port
Side Speaker (Gray)
Rear Speaker (Black)
Central / Bass (Orange)
Line In (Light Blue)
Front Speaker (Lime)
8 Microphone (Pink)
USB 2.0 Ports (USB01)
9
10 USB 2.0 Ports (USB23)
11
12
13
VGA Port
PS/2 Keyboard Port (Purple)
PS/2 Mouse Port (Green)
* If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See
the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker
Central / Bass
Side Speaker
(No. 7)
(No. 4)
(No. 5)
(No. 3)
2
4
6
8
V
V
V
V
--
V
V
V
--
--
V
V
--
--
--
V
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
ASRock K8NF4G-SATA2 Motherboard
33333
Introduction
Introduction
Introduction
Introduction
Introduction
1.1.1.1.1.
Thank you for purchasing ASRock K8NF4G-SATA2 motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control. It de-
livers excellent performance with robust design conforming to ASRock’s commit-
ment to quality and endurance.
This Quick Installation Guide contains introduction of the motherboard and step-by-
step installation guide. More detailed information of the motherboard can be found in
the user manual presented in the Support CD.
Because the motherboard specifications and the BIOS software might
be updated, the content of this manual will be subject to change without
notice. In case any modifications of this manual occur, the updated
version will be available on ASRock website without further notice. You
may find the latest memory and CPU support lists on ASRock website
as well.
ASRock website http://www.asrock.com
Package Contents
Package Contents
Package Contents
Package Contents
Package Contents
1.11.11.11.11.1
1 x ASRock K8NF4G-SATA2 Motherboard
(Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm)
1 x ASRock K8NF4G-SATA2 Quick Installation Guide
1 x ASRock K8NF4G-SATA2 Support CD
1 x Ultra ATA 66/100/133 IDE Ribbon Cable (80-conductor)
1 x 3.5-in Floppy Drive Ribbon Cable
1 x Serial ATA (SATA) Data Cable (Optional)
1 x Serial ATA (SATA) HDD Power Cable (Optional)
1 x ASRock 8CH I/O Shield
1 x COM Port Bracket
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
44444
ASRock K8NF4G-SATA2 Motherboard
1.21.21.21.21.2
Specifications
Specifications
Specifications
Specifications
Specifications
Platform
CPU
Chipset
Memory
Hybrid Booster
Expansion Slot
Graphics
Audio
LAN
Rear Panel I/O
Connector
- Micro ATX Form Factor: 9.6-in x 8.0-in, 24.4 cm x 20.3 cm
- 754-Pin Socket Supporting advanced 64-bit AMD AthlonTM 64
and 32-bit/64-bit Sempron Processors
- Supports AMD’s Cool ‘n’ QuietTM Technology
(see CAUTION 1)
- Chipset capable to FSB 1 GHz (2.0 GT/s)
- Supports Untied Overclocking Technology (see CAUTION 2)
- Supports Hyper-Transport Technology
- Northbridge: nVidia® GeForce 6100
- Southbridge: nVidia® nForce 410 MCP
- 2 x DDR DIMM slots
- Support DDR400/333/266
- Max. capacity: 2GB
- CPU Frequency Stepless Control
- ASRock U-COP (see CAUTION 3)
- Boot Failure Guard (B.F.G.)
- 2 x PCI slots
- 1 x PCI Express x 16 slot
- 1 x PCI Express x 1 slot
- 1 x AMR slot
- Integrated NV44 graphics DX9.0 VGA
- Pixel Shader 3.0
- Max. shared memory 128MB
- Realtek ALC850 7.1 channel AC’97 audio codec
- Realtek PHY RTL8201CL
- Speed: 10/100 Ethernet
- Supports Wake-On-LAN
ASRock 8CH I/O
- 1 x PS/2 Mouse
- 1 x PS/2 Keyboard Port
- 1 x VGA Port
- 1 x Parallel Port (ECP/EPP Support)
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 Port
- Audio Jack: Side Speaker/Rear Speaker/Central Bass/Line
in/Front Speaker/Microphone (see CAUTION 4)
- 2 x Serial ATAII 3.0Gb/s connectors,
support RAID 0, 1, JBOD (Not Support “Hot Plug” function)
(see CAUTION 5)
ASRock K8NF4G-SATA2 Motherboard
55555
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
- 2 x ATA133 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- CPU/Chassis FAN connector
- 20 pin ATX power connector
- 4 pin 12V power connector
- CD in header
- Front panel audio connector
- 2 x USB 2.0 headers (support 4 USB 2.0 ports)
(see CAUTION 6)
- 4Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- SMBIOS 2.3.1 Support
- CPU Frequency Stepless Control (see CAUTION 7)
- Drivers, Utilities, AntiVirus Software
- CPU Temperature Sensing
- Motherboard Temperature Sensing
- CPU Overheat Shutdown to Protect CPU Life
- CPU Fan Tachometer
- Chassis Fan Tachometer
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore
- Microsoft® Windows® 2000 / XP / XP 64-bit compliant
- FCC, CE, WHQL
BIOS Feature
Support CD
Hardware
Monitor
OS
Certifications
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
66666
ASRock K8NF4G-SATA2 Motherboard
CAUTION!
1. For power-saving’s sake, it is strongly recommended to enable AMD’s Cool ‘n’
QuietTM technology under Windows system. See APPENDIX on page 40 of
“User Manual” in the Support CD to enable AMD’s Cool ‘n’ QuietTM technology.
Since not all K8 754-pin CPU can support AMD’s Cool ‘n’ QuietTM technology,
please check AMD’s website for details.
2. This motherboard supports Untied Overclocking Technology. Please read “Un-
tied Overclocking Technology” on page 18 for details.
3. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
4. For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 3 for proper connection.
5. Before installing SATAII hard disk to SATAII connector, please read the “SATAII
Hard Disk Setup Guide” on page 15 to adjust your SATAII hard disk drive to
SATAII mode. Besides, you are allowed to downgrade the SATAII hard disk to
SATA hard disk (from SATAII 3Gb/s down to SATA 1.5Gb/s), and connect it to
the SATAII connector. You can also connect SATA hard disk to SATAII connec-
tor directly.
6. Power Management for USB 2.0 works fine under Microsoft® Windows® XP
SP1 / 2000 SP4.
7. Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
ASRock K8NF4G-SATA2 Motherboard
77777
2.2.2.2.2.
Installation
Installation
Installation
Installation
Installation
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1.
2.
Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the car-
pet or the like. Also remember to use a grounded wrist strap or
touch a safety grounded object before you handle components.
Hold components by the edges and do not touch the ICs.
3.
4. Whenever you uninstall any component, place it on a
grounded antstatic pad or in the bag that comes with the
component.
5. When placing screws into the screw holes to secure the
motherboard to the chassis, please do not over-tighten the screws!
Doing so may damage the motherboard.
CPU Installation
CPU Installation
2.12.12.12.12.1 CPU Installation
CPU Installation
CPU Installation
Step 1. Unlock the socket by lifting the lever up to a 90° angle.
Step 2. Position the CPU directly above the socket such that the CPU corner with
the golden triangle matches the socket corner with a small triangle.
Step 3. Carefully insert the CPU into the socket until it fits in place.
The CPU fits only in one correct orientation. DO NOT force the CPU
into the socket to avoid bending of the pins.
Step 4. When the CPU is in place, press it firmly on the socket while you push
down the socket lever to secure the CPU. The lever clicks on the side tab
to indicate that it is locked.
Install CPU fan and heatsink. For proper installation, please kindly refer to
the instruction manuals of your CPU fan and heatsink vendors.
Step 5.
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
88888
ASRock K8NF4G-SATA2 Motherboard