Facsimile
Quick Reference Guide
Model No. KX-PW606DL
KX-PW606DW
KX-PW616DL
KX-PW616D
Main unit:
Portable handset:
KX-PW606
KX-PW616
KX-FKN514
KX-PW606DL
Thank you for purchasing a Panasonic facsimile.
Table of Contents
Finding the controls …………………………………………………………… 2
Installations and connections ………………………………………………… 4
Setting the date and time ……………………………………………………… 7
Setting your facsimile telephone number …………………………………… 7
Setting your logo ……………………………………………………………… 8
Character input and command key table …………………………………… 9
Voice guide …………………………………………………………………… 10
Automatic dialing on the main unit ………………………………………… 11
Automatic dialing on the portable handset (KX-FKN514) ……………… 13
Intercom ……………………………………………………………………… 14
Sending faxes ……………………………………………………………… 15
Receiving faxes ……………………………………………………………… 16
Operating the built-in answering device ………………………………… 19
Night mode …………………………………………………………………… 20
Call block …………………………………………………………………… 21
Specifications ……………………………………………………………… 22
This guide explains some basic features and operations, but not all of them.
For further details, see the Japanese operating instructions.
This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
Any details given in this guide are subject to change without notice.
This unit is equipped with the voice guide features. (Japanese only)
For details about voice guide, please see page 10.
KX-PW606_616DL_QG.indb 1
KX-PW606_616DL_QG.indb 1
2007/02/08 16:20:56
2007/02/08 16:20:56
Finding the controls
Main unit
1
2
3
4
5
6
7
8
9
10
11
12 13
14
15
1 Liquid crystal display
The display turns off after about 2 minutes
of inactivity.
PW606 has a monochrome display.
PW616 has a color display.
2 Volume/Change/Redial/Phonebook key
To adjust the volume.
To change Hiragana into Kanji.
To redial the phone numbers in
the redial list. The last 10 phone
numbers dialed are stored in
memory.
To use the phonebook.
3 Call/Fax List button starts a search in
— the Number Display (Caller ID) log.
— the fax list stored in memory.
Call/Fax List indicator lights when
— a call was missed.(For Number Display
service users.)
— a fax was stored in memory.
4 Auto Answer button & indicator
—light on: answering device activated.
—light off: used as a regular telephone.
5 Replay button plays back recorded
messages.
Record button records a telephone
conversation.
6 Speed Dialer button
7 Intercom button
8 Monitor button
9 Multi-operation buttons refer to the function
displayed on the display panel.
10 Fax button starts faxing.
11 Copy button starts copying.
12 Stop button
13 Tone button switches to tone dialing.
Night mode button
14 Sharp button
Key lock button can lock the main unit so
that no calls or settings can be made. To
turn key lock on, press this button for about
3 seconds until a single beep is heard.
“
To turn key lock off, press this button for
” is displayed.
about 3 seconds.
15 Power indicator
22
KX-PW606_616DL_QG.indb 2
KX-PW606_616DL_QG.indb 2
2007/02/08 16:20:57
2007/02/08 16:20:57
Finding the controls
Portable handset (KX-FKN514)
Ringer indicator flashes when you are receiving
an incoming call or a call is put on hold.
Liquid crystal display
How to use key
Earpiece
● To use the phonebook.
● To redial the phone
numbers in the redial
list. The last 10 phone
numbers dialed are
stored in memory.
● To adjust the volume.
● To change Hiragana into
Kanji.
● To make/answer calls.
● To end a call.
● To end or exit from editing
or other operations.
● To put a call on hold.
● To start a search in the
Number Display log.
(For Number Display
service users.)
● To use the speakerphone.
Dial buttons
Tone button
● To switch to tone dialing.
Sharp button
Key lock button
● To lock the portable
handset so that no calls
or setings can be made.
To turn key lock on,
press this button for
about 3 seconds until a
single beep is heard.
● “ ” is displayed.
● To turn key lock off,
press this button for
about 3 seconds.
Portable handset number
(and name)
No link to the main unit
Function menu that is
controlled by or
Battery strength
How to use buttons
and buttons refer to the function
displayed on the bottom of the display.
They function differently depending on
the mode.
● To change your voice.
● To mute your voice to the
other party by pressing this
button for about 2 seconds.
(To release the mute,
press this button again.)
● For call waiting service
users.
● To clear letters/numbers.
● To page the main unit
and/or portable handset(s).
Microphone
Do not cover the
microphone while
talking.
KX-PW606_616DL_QG.indb 3
KX-PW606_616DL_QG.indb 3
2007/02/08 16:21:01
2007/02/08 16:21:01
33
Installations and connections
Installing the ink film
Insert the orange
gear into the left slot
of the main unit.
1 Open the control panel.
2 Open the back cover.
3 Insert the ink film.
Insert the white gear into the right slot
of the main unit.
4 If the ink film is slack, tighten it by
5 Close the back cover pressing
winding this gear (orange).
“ ” down on both sides
until it clicks into place.
When the unit runs out of ink film, the following message will be displayed.
6 Close the control panel.
フィルムがなくなりました U23
交換してください
品番:KX−FAN190
Install a new ink film.
Replacement ink film:
KX-FAN190 (15 m)
KX-FAN190W (15 m X 2) ¥1,208
¥714
44
・As of February 2007.
・Tax included.
KX-PW606_616DL_QG.indb 4
KX-PW606_616DL_QG.indb 4
2007/02/08 16:21:02
2007/02/08 16:21:02
Installations and connections
Installing recording paper (A4 size)
1 Open the recording paper tray.
2 Set up the recording paper stands.
Pull out the front stand first.
Recording paper
● Printing side is
on the back.
3 Insert the recording paper into the
recording paper tray. (Up to 15 sheets)
● Fan the stack of recording paper.
Folding the recording paper tray
1 Remove the recording paper and fold the recording
2 Close the recording paper tray.
paper stands in.
KX-PW606_616DL_QG.indb 5
KX-PW606_616DL_QG.indb 5
2007/02/08 16:21:05
2007/02/08 16:21:05
55
Installations and connections
Connecting the main unit
1 Raise the antenna.
2 Connect the cord and
place the handset on
the main unit.
Telephone line cord
(supplied accessory)
Wall jack
3 Connect the telephone line cord.
Power cord
4 Connect the power cord.
Power outlet
(AC 100 V)
After the Power On...
1 This unit will automatically select the dialing
mode (Tone/Pulse).
2 When the following is displayed, press
(Stop).
選んでケータイ
,なし
あり
If you can not make a call...
Set the dialing mode with the main unit.
1. Press
2. Press
(Function).
.
3. Press
(Search button) repeatedly until the desired
Setting up the portable handset
(KX-FKN514)
1
Ni-MH
2
Battery
3
Terminals
Ni-MH
Power outlet
(AC 100 V)
AC adaptor
Charger
setting is selected.
Example :
回線種別
自動, プッシュ,
,10
20
4. Press
(Set).
5. Press
(Stop).
6
プッシュ : Tone
20
10
自動 : Auto (Default)
: Pulse (20 PPS)
: Pulse (10 PPS)
Plug
4 Charge the battery in the charger for 10 hours.
After your Panasonic battery is fully charged,
it will last up to about 5 hours of conversation.
KX-PW606_616DL_QG.indb 6
KX-PW606_616DL_QG.indb 6
2007/02/08 16:21:09
2007/02/08 16:21:09
Setting the date and time
Setting your facsimile
telephone number
1 Press
(Function).
2 Press
.
Example :
最初の設定
呼出音とベル回数
音声の設定
電話帳の設定
2007年09 月30 日
2
15:00
Cursor
1 Press
(Function).
2 Press
.
最初の設定
呼出音とベル回数
音声の設定
電話帳の設定
あなたの電話番号?
3 Enter the correct year/month/day.
Example: October 1, 2007
Press
.
2007年10 月01 日
1
15:00
4 Enter the correct hour/minute in a 24-hour clock entry.
Example: 15:45 (3:45 PM)
Press
.
3 Enter your facsimile telephone number, up to
あなたの電話番号?
20 digits.
Example: +098 7654··
+098 7654..
The
(Tone) button replaces
the digit with “+”.
2007年10 月01 日
2
15:45
登録しました
2007年10 月01 日
2
15:45
The
button replaces the digit with
a space.
4 Press
(Set).
登録しました
あなたの電話番号?
+
+098 7654..
5 Press
(Set).
6 Press
(Stop).
Example :
用件 0件
ファクス 0件
5 Press
(Stop).
Example :
用件 0件
ファクス 0件
KX-PW606_616DL_QG.indb 7
KX-PW606_616DL_QG.indb 7
2007/02/08 16:21:11
2007/02/08 16:21:11
7
Setting your logo
1 Press
(Function).
最初の設定
呼出音とベル回数
音声の設定
電話帳の設定
2 Press
.
名前(印刷用)?
[かな]
3 Enter your logo, up to 30 characters, using the dial
keypad.
To enter English characters easily, press
(Character input mode) repeatedly and select
“ 英 ” (English and sign input mode).
For details, see the table on page 9 for instructions.
_
Cursor
5. Press
five times.
Example: Micah
1. Press
once.
名前(印刷用)?
M
[英]
2. Press
six times.
3. Press
six times.
Cursor
名前(印刷用)?
M i
名前(印刷用)?
Micc
[英]
[英]
4. Press
to move the cursor to the next space
and press
four times.
名前(印刷用)?
Mica
名前(印刷用)?
Micahh
[英]
[英]
4 Press
(Set).
登録しました
名前(印刷用)?
Micah
M
_
[英]
5 Press
(Stop).
Example :
用件 0件
ファクス 0件
8
KX-PW606_616DL_QG.indb 8
KX-PW606_616DL_QG.indb 8
2007/02/08 16:21:12
2007/02/08 16:21:12