第1页 / 共180页
第2页 / 共180页
第3页 / 共180页
第4页 / 共180页
第5页 / 共180页
第6页 / 共180页
第7页 / 共180页
第8页 / 共180页
Agilent 66319B/D 66321B/D 使用手册（含 控制命令）.pdf
Warranty Information
Safety Summary
Declaration Page
Acoustic Noise Information
Printing History
Table of Contents
1 - Quick Reference
The Front Panel - At a Glance
The Rear Panel - At a Glance
Instrument Configuration
Use the front panel Address key to configure the interface
Front Panel Number Entry
Use the arrow keys and knob to change voltage or current settings
Use the Function keys and knob to change the displayed settings
Use the arrow keys to edit individual digits in the displayed setting
Use the Function keys and Entry keys to enter a new value
Front Panel Annunciators
Immediate Action Keys
Front Panel Menus - At a Glance
SCPI Programming Commands - At a Glance
2 - General Information
Document Orientation
Safety Considerations
Options and Accessories
Description and Model Differences
Agilent 66321B
Agilent 66319B
Agilent 66321D and 66319D
Common Features
Front Panel Controls
Remote Programming
Output 1 Characteristic
Programmable Output Resistance
Output 2 Characteristic
Option 521 Description (Agilent 66319B/D only)
3 - Installation
Installation and Operation Checklist
Inspection
Damage
Packaging Material
Items Supplied
Cleaning
Location
Bench Operation
Rack Mounting
Input Connections
Connect the Power Cord
Output Connections
Output 1
Output 2
Current Ratings
Voltage Drops and Lead Resistance
Remote Sense Connections
Load Regulation and Voltage Drop in the Remote Sense Leads
Maintaining Stability while Remote Sensing
Open Sense Lead Protection
Local Sensing
Output Compensation
OVP Considerations
Programmable Voltage Protection
DVM Connections
Measuring Circuits that are Not Powered by the Main Output
Measuring Circuits that are Floating with Respect to the Main Output
External Protection and Trigger Input Connections
Digital I/O Connections
Computer Connections
GPIB Interface
4 - Turn-On Checkout
Checkout Procedure
In Case of Trouble
Selftest Error Messages
Runtime Error Messages
Line Fuse
5 - Front Panel Operation
Introduction
Front Panel Description
System Keys
Function Keys
Immediate Action Keys
Scrolling Keys
Metering Keys
Output Control Keys
Entry Keys
Examples of Front Panel Programming
1 - Using the Front Panel Display
2 - Setting the Output Voltage, Current, Resistance, Compensation, and Relay Mode
3 - Setting the Output 2 Voltage and Current (Agilent 66319B/66319D only)
4 - Querying and Clearing Output Protection and Errors
5 – Making Basic Front Panel Measurements
6 – Making Enhanced Front Panel Measurements
7 – Making DVM Measurements (Agilent 66321D/66319D only)
8 - Programming Output Port Functions
9 - Setting the GPIB Address
10 - Storing and Recalling Instrument States
6 - Introduction to Programming
External References
GPIB References
SCPI References
VXIplug&play Power Products Instrument Drivers
Supported Applications
System Requirements
Downloading and Installing the Driver
Accessing Online Help
GPIB Capabilities of the DC Source
GPIB Address
Introduction to SCPI
Conventions Used in This Guide
Types of SCPI Commands
Multiple Commands in a Message
Moving Among Subsystems
Including Common Commands
Using Queries
Types of SCPI Messages
The Message Unit
Headers
Query Indicator
Message Unit Separator
Root Specifier
Message Terminator
SCPI Data Formats
Numerical Data Formats
Suffixes and Multipliers
Response Data Types
SCPI Command Completion
Using Device Clear
SCPI Conformance Information
SCPI Conformed Commands
Non-SCPI Commands
7 - Programming the DC Source
Introduction
Programming the Output
Power-on Initialization
Enabling the Output
Output Voltage
Maximum Voltage
Overvoltage Protection
Output Current
Maximum Current
Overcurrent Protection
Output Resistance
Triggering Output Changes
SCPI Triggering Nomenclature
Output Trigger Model
Setting the Voltage, Current, or Resistance Transient Levels
Enabling the Output Trigger System
Selecting the Output Trigger Source
Generating Triggers
Single Trigger
Multiple Triggers
Making Basic Measurements
Average Measurements
Controlling Measurement Samples
Window Functions
Measuring Output 2 Voltage and Current (Agilent 66319B/66319D only)
Making Enhanced Measurements
Current Ranges and Measurement Detector
RMS Measurements
Pulse Measurements
Minimum and Maximum Measurements
High/Low Measurements
Returning All Measurement Data From the Data Buffer
Making DVM Measurements
Average Measurements
RMS Measurements
Triggered Measurements
SCPI Triggering Nomenclature
Measurement Trigger Model
Enabling the Measurement Trigger System
Selecting the Measurement Trigger Source
Selecting the Sensing Function
Generating Measurement Triggers
Single Triggers
Multiple Triggers
Pre-trigger and Post-trigger Data Acquisition
Programming the Status Registers
Power-On Conditions
Operation Status Group
Questionable Status Group
Standard Event Status Group
The PON (Power On) Bit
Status Byte Register
The MSS Bit
The RQS Bit
The MAV Bit and Output Queue
Determining the Cause of a Service Interrupt
Servicing Operation Status and Questionable Status Events
Monitoring Both Phases of a Status Transition
Inhibit/Fault Indicator
Remote Inhibit (RI)
Discrete Fault Indicator (DFI)
Using the Inhibit/Fault Port as a Digital I/O
8 - Language Dictionary
Introduction
Subsystem Commands
Common Commands
Programming Parameters
Calibration Commands
CALibrate:CURRent
CALibrate:CURRent2
CALibrate:CURRent:MEASure:R3
CALibrate:CURRent:MEASure:LOWRange
CALibrate:CURRent:MEASure:AC
CALibrate:DATA
CALibrate:DATE
CALibrate:DVM
CALibrate:LEVel
CALibrate:PASSword
CALibrate:RESistance
CALibrate:SAVE
CALibrate:STATe
CALibrate:VOLTage
CALibrate:VOLTage2
Display Commands
DISPlay
DISPlay:CHANnel
DISPlay:MODE
DISPlay:TEXT
Measurement Commands
FORMat
FORMat:BORDer
MEASure:ARRay:CURRent? FETCh:ARRay:CURRent?
MEASure:ARRay:VOLTage? FETCh:ARRay:VOLTage?
MEASure:CURRent? [MAX | MIN | ] FETCh:CURRent?
MEASure:CURRent2?
MEASure:CURRent:ACDC? FETCh:CURRent:ACDC?
MEASure:CURRent:HIGH? FETCh:CURRent:HIGH?
MEASure:CURRent:LOW? FETCh:CURRent:LOW?
MEASure:CURRent:MAXimum? FETCh:CURRent: MAXimum?
MEASure:CURRent:MINimum? FETCh:CURRent:MINimum?
MEASure:DVM? FETCh:DVM?
MEASure:DVM:ACDC? FETCh:DVM:ACDC?
MEASure:VOLTage? FETCh:VOLTage?
MEASure:VOLTage2
MEASure:VOLTage:ACDC? FETCh:VOLTage:ACDC?
MEASure:VOLTage:HIGH? FETCh:VOLTage:HIGH?
MEASure:VOLTage:LOW? FETCh:VOLTage:LOW?
MEASure:VOLTage:MAXimum? FETCh:VOLTage:MAXimum?
MEASure:VOLTage:MINimum? FETCh:VOLTage:MINimum?
SENSe:CURRent:DETector
SENSe:CURRent:RANGe
SENSe:LEAD:STATus?
SENSe:FUNCtion
SENSe:PROTection:STATe
SENSe:SWEep:OFFSet:POINts
SENSe:SWEep:POINts
SENSe:SWEep:TINTerval
SENSe:WINDow
Output Commands
INSTrument:COUPle:OUTPut:STATe
OUTPut[1 | 2]
OUTPut[1 | 2]:RELay:MODE
OUTPut:COMPensation:MODE
OUTPut:DFI
OUTPut:DFI:SOURce
OUTPut:PON:STATe
OUTPut:PROTection:CLEar
OUTPut:PROTection:DELay
OUTPut:RI:MODE
[SOURce:]CURRent
[SOURce:]CURRent2
[SOURce:]CURRent:PROTection:STATe
[SOURce:]CURRent:TRIGger
[SOURce:]CURRent2:TRIGger
[SOURce:]DIGital:DATA
[SOURce:]DIGital:FUNCtion
[SOURce:]RESistance
[SOURce:]RESistance:TRIGger
[SOURce:]VOLTage
[SOURce:]VOLTage2
[SOURce:]VOLTage:PROTection
[SOURce:]VOLTage:PROTection:STATe
[SOURce:]VOLTage:TRIGger
[SOURce:]VOLTage2:TRIGger
Status Commands
STATus:PRESet
STATus:OPERation?
STATus:OPERation:CONDition?
STATus:OPERation:ENABle
STATus:OPERation:NTR STATus:OPERation:PTR
STATus:QUEStionable?
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle
STATus:QUEStionable:NTR STATus:QUEStionable:PTR
System Commands
SYSTem:ERRor?
SYSTem:LANGuage
SYSTem:VERSion?
Trigger Commands
ABORt
INITiate:SEQuence INITiate:NAME
INITiate:CONTinuous:SEQuence1 INITiate:CONTinuous:NAME TRANsient
TRIGger
TRIGger:SOURce
TRIGger:SEQuence2 TRIGger:ACQuire
TRIGger:SEQuence2:COUNt:CURRent TRIGger:ACQuire:COUNt:CURRent
TRIGger:SEQuence2:COUNt:DVM TRIGger:ACQuire:COUNt:DVM
TRIGger:SEQuence2:COUNt:VOLTage TRIGger:ACQuire:COUNt:VOLTage
TRIGger:SEQuence2:HYSTeresis:CURRent TRIGger:ACQuire:HYSTeresis:CURRent
TRIGger:SEQuence2:HYSTeresis:DVM TRIGger:ACQuire:HYSTeresis:DVM
TRIGger:SEQuence2:HYSTeresis:VOLTage TRIGger:ACQuire:HYSTeresis:VOLTage
TRIGger:SEQuence2:LEVel:CURRent TRIGger:ACQuire:LEVel:CURRent
TRIGger:SEQuence2:LEVel:DVM TRIGger:ACQuire:LEVel:DVM
TRIGger:SEQuence2:LEVel:VOLTage TRIGger:ACQuire:LEVel:VOLTage
TRIGger:SEQuence2:SLOPe:CURRent TRIGger:ACQuire:SLOPe:CURRent
TRIGger:SEQuence2:SLOPe:DVM TRIGger:ACQuire:SLOPe:DVM
TRIGger:SEQuence2:SLOPe:VOLTage TRIGger:ACQuire:SLOPe:VOLTage
TRIGger:SEQuence2:SOURce TRIGger:ACQuire:SOURce
TRIGger:SEQuence1:DEFine TRIGger:SEQuence2:DEFine
Common Commands
*CLS
*ESE
*ESR?
*IDN?
*OPC
*OPT?
*PSC
*RCL
*RST
*SAV
*SRE
*STB?
*TRG
*TST?
*WAI
A - Specifications
Specifications
Supplemental Characteristics
B - Performance, Calibration, and Configuration
Introduction
Equipment Required
Measurement Techniques
Test Setup
Electronic Load
Current-Monitoring Resistor
Performance Tests
Programming
Constant Voltage (CV) Tests
CV Setup
Voltage Programming and Readback Accuracy (performance, calibration)
CV Load Effect (performance)
CV Source Effect (performance)
CV Noise (performance)
Transient Recovery Time (performance)
Constant Current (CC) Tests
CC Setup
Current Programming and Readback Accuracy (performance, calibration)
1A Range Current Readback Accuracy (performance, calibration)
0.02A Range Current Readback Accuracy (performance, calibration)
- 0.02A Range Current Sink Operation (performance, calibration)
- 3A Range Current Sink Operation (performance, calibration)
CC Load and Line Regulation (performance)
CC Load Effect (performance)
CC Source Effect (performance)
CC Noise (performance)
Resistance Tests
Resistance Programming (performance, calibration)
DVM Tests
DVM Measurement Accuracy (calibration)
Performance Test Equipment Form
Performance Test Record Form
Performing the Calibration Procedure
Front Panel Calibration Menu
Front Panel Calibration Procedure
Calibration Error Messages
Changing the Calibration Password
Calibration Over the GPIB
Performing the Configuration Procedure
C - Error Messages
Error Number List
D - Example Programs
Pulse Measurements
Current Pulse Measurement Using BASIC
Voltage Pulse Measurement Using VISA Library Calls
E - Line Voltage Conversion
Index
Manual Updates
USER’S GUIDE
Agilent Technologies
Model 66319B/D, 66321B/D
Mobile Communications DC Source
Featuring programmable output resistance
(Refer to page 18 for a brief description of the model differences.)
Agilent Part No. 5964-8184
Microfiche No. 5964-8185
Printed in Malaysia
February 2005
Warranty Information
CERTIFICATION
Agilent Technologies certifies that this product met its published specifications at time of shipment from the factory.
Agilent Technologies further certifies that its calibration measurements are traceable to the United States National
Bureau of Standards, to the extent allowed by the Bureau's calibration facility, and to the calibration facilities of other
International Standards Organization members.
WARRANTY
This Agilent Technologies hardware product is warranted against defects in material and workmanship for a period
of one year from date of delivery. Agilent Technologies software and firmware products, which are designated by
Agilent Technologies for use with a hardware product and when properly installed on that hardware product, are
warranted not to fail to execute their programming instructions due to defects in material and workmanship for a
period of 90 days from date of delivery. During the warranty period Agilent Technologies will, at its option, either
repair or replace products which prove to be defective. Agilent does not warrant that the operation for the software
firmware, or hardware shall be uninterrupted or error free.
For warranty service, with the exception of warranty options, this product must be returned to a service facility
designated by Agilent Technologies. Customer shall prepay shipping charges by (and shall pay all duty and taxes)
for products returned to Agilent Technologies for warranty service. Except for products returned to Customer from
another country, Agilent Technologies shall pay for return of products to Customer.
Warranty services outside the country of initial purchase are included in Agilent Technologies' product price, only if
Customer pays Agilent Technologies international prices (defined as destination local currency price, or U.S. or
Geneva Export price).
If Agilent is unable, within a reasonable time to repair or replace any product to condition as warranted, the
Customer shall be entitled to a refund of the purchase price upon return of the product to Agilent Technologies.
LIMITATION OF WARRANTY
The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by the
Customer, Customer-supplied software or interfacing, unauthorized modification or misuse, operation outside of the
environmental specifications for the product, or improper site preparation and maintenance. NO OTHER
WARRANTY IS EXPRESSED OR IMPLIED. AGILENT TECHNOLOGIES SPECIFICALLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
EXCLUSIVE REMEDIES
THE REMEDIES PROVIDED HEREIN ARE THE CUSTOMER'S SOLE AND EXCLUSIVE REMEDIES. AGILENT
SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
ASSISTANCE
The above statements apply only to the standard product warranty. Warranty options, extended support contacts,
product maintenance agreements and customer assistance agreements are also available. Contact your nearest
Agilent Technologies Sales and Service office for further information on Agilent Technologies' full line of Support
Programs.
2
Safety Summary
The following general safety precautions must be observed during all phases of operation of this instrument.
Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety
standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability
for the customer's failure to comply with these requirements.
GENERAL
This product is a Safety Class 1 instrument (provided with a protective earth terminal). The protective features of
this product may be impaired if it is used in a manner not specified in the operation instructions.
Any LEDs used in this product are Class 1 LEDs as per IEC 825-1.
This ISM device complies with Canadian ICES-001. Cet appareil ISM est conforme à la norme NMB-001 du Canada.
ENVIRONMENTAL CONDITIONS
This instrument is intended for indoor use in an installation category II, pollution degree 2 environment. It is
designed to operate at a maximum relative humidity of 95% and at altitudes of up to 2000 meters. Refer to the
specifications tables for the ac mains voltage requirements and ambient operating temperature range.
BEFORE APPLYING POWER
Verify that the product is set to match the available line voltage, the correct fuse is installed, and all safety
precautions are taken. Note the instrument's external markings described under "Safety Symbols".
GROUND THE INSTRUMENT
To minimize shock hazard, the instrument chassis and cover must be connected to an electrical ground. The
instrument must be connected to the ac power mains through a grounded power cable, with the ground wire firmly
connected to an electrical ground (safety ground) at the power outlet. Any interruption of the protective (grounding)
conductor or disconnection of the protective earth terminal will cause a potential shock hazard that could result in
personal injury.
ATTENTION: Un circuit de terre continu est essentiel en vue du fonctionnement sécuritaire de l'appareil.
Ne jamais mettre l'appareil en marche lorsque le conducteur de mise … la terre est d‚branch‚.
FUSES
Only fuses with the required rated current, voltage, and specified type (normal blow, time delay, etc.) should be
used. Do not use repaired fuses or short-circuited fuseholders. To do so could cause a shock or fire hazard.
Vous devrez impérativement utiliser des fusibles calibrés aux spécifications de courant, tension et type
(coupure, délai de coupure, etc ...). N'utilisez jamais de fusibles réparés et ne court-circuitez pas les supports
de fusibles. Sinon, vous risquez de provoquer un choc électrique ou un incendie.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the instrument in the presence of flammable gases or fumes.
DO NOT REMOVE THE INSTRUMENT COVER
Operating personnel must not remove instrument covers. Component replacement and internal adjustments must be
made only by qualified service personnel.
Instruments that appear damaged or defective should be made inoperative and secured against unintended
operation until they can be repaired by qualified service personnel.
3
SAFETY SYMBOLS
Direct current
Alternating current
Both direct and alternating current
Three-phase alternating current
Earth (ground) terminal
Protective earth (ground) terminal
Frame or chassis terminal
Terminal is at earth potential. Used for measurement and control circuits designed to be
operated with one terminal at earth potential.
Terminal for Neutral conductor on permanently installed equipment
Terminal for Line conductor on permanently installed equipment
On (supply)
Off (supply)
Standby (supply). Units with this symbol are not completely disconnected from ac mains when
this switch is off. To completely disconnect the unit from ac mains, either disconnect the power
cord or have a qualified electrician install an external switch.
In position of a bi-stable push control
Out position of a bi-stable push control
Caution, risk of electric shock
Caution, hot surface
Caution (refer to accompanying documents)
WARNING
Caution
The WARNING sign denotes a hazard. It calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in personal injury. Do not proceed
beyond a WARNING sign until the indicated conditions are fully understood and met.
The CAUTION sign denotes a hazard. It calls attention to an operating procedure, or the like,
which, if not correctly performed or adhered to, could result in damage to or destruction of part
or all of the product. Do not proceed beyond a CAUTION sign until the indicated conditions
are fully understood and met.
4
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer’s Name and Address
Responsible Party
Agilent Technologies, Inc.
550 Clark Drive, Suite 101
Budd Lake, New Jersey 07828
USA
Alternate Manufacturing Site
Agilent Technologies (Malaysia) Sdn. Bhd
Malaysia Manufacturing
Bayan Lepas Free Industrial Zone, PH III
11900 Penang,
Malaysia
Bill Darcy/ Regulations Manager
For further information, please contact your local Agilent Technologies sales office, agent or distributor, or
Agilent Technologies Deutschland GmbH, Herrenberger Straβe 130, D71034 Böblingen, Germany
Revision: B.00.00
Issue Date: Created on 11/24/2003 3:14
Document No. Eagle.11.24.doc
PM
To obtain the latest Declaration of Conformity, go to http://regulations.corporate.agilent.com and click on “Declarations of
Conformity.”
5
Declares under sole responsibility that the product as originally delivered
Product Names a) Mobile Communications DC Source
b) System DC Power Supply
Model Numbers a) 66332A, 66312A, 66311B, 66311D
66309B, 66309D, 66319B, 66319D, 66321B, 66321D
b) 6631B, 6632B, 6633B, 6634B 6611C
6612C, 6613C, 6614C
Product Options This declaration covers all options and customized products based on
the above products.
Complies with the essential requirements of the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC (including 93/68/EEC) and carries the CE Marking accordingly.
EMC Information ISM Group 1 Class A Emissions
As detailed in Electromagnetic Compatibility (EMC), Certificate of Conformance Number
CC/TCF/00/030 based on Technical Construction File (TCF) HPNJ8, dated
Apr. 25, 2000
Assessed by: Celestica Ltd, Appointed Competent Body
Westfields House, West Avenue
Kidsgrove, Stoke-on-Trent
Straffordshire, ST7 1TL
United Kingdom
Safety Information and Conforms to the following safety standards.
IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 1010.1:1992
UL 61010B-1: 2003
This DoC applies to above-listed products placed on the EU market after:
January 1, 2004
Date
Acoustic Noise Information
Herstellerbescheinigung
Diese Information steht im Zusammenhang mit den Anforderungen der
Maschinenläminformationsverordnung vom 18 Januar 1991.
* Schalldruckpegel Lp <70 dB(A)
* Am Arbeitsplatz
* Normaler Betrieb
* Nach EN 27779 (Typprüfung).
Manufacturer's Declaration
This statement is provided to comply with the requirements of the German Sound Emission Directive,
from 18 January 1991.
* Sound Pressure Lp <70 dB(A)
* At Operator Position
* Normal Operation
* According to EN 27779 (Type Test).
Printing History
The edition and current revision of this manual are indicated below. Reprints of this manual containing
minor corrections and updates may have the same printing date. Revised editions are identified by a new
printing date. A revised edition incorporates all new or corrected material since the previous printing
date.
Changes to the manual occurring between revisions are covered by change sheets shipped with the
manual. In some cases, the manual change applies only to specific instruments. Instructions provided on
the change sheet will indicate if a particular change applies only to certain instruments.
This document contains proprietary information protected by copyright. All rights are reserved. No part
of this document may be photocopied, reproduced, or translated into another language without the prior
consent of Agilent Technologies. The information contained in this document is subject to change without
notice.
© Copyright 2000, 2001, 2003, 2005, 2008 Agilent Technologies, Inc. Edition 1 ____May, 2000
Update 1 ____January, 2001
Update 2 ____May, 2003
Update 3 ____February, 2005
Update 4 ____September, 2008
6
Table of Contents
Warranty Information
Safety Summary
Declaration Page
Acoustic Noise Information
Printing History
Table of Contents
1 - QUICK REFERENCE
The Front Panel - At a Glance
The Rear Panel - At a Glance
Instrument Configuration
Front Panel Number Entry
Front Panel Annunciators
Immediate Action Keys
Front Panel Menus - At a Glance
SCPI Programming Commands - At a Glance
2 - GENERAL INFORMATION
Document Orientation
Safety Considerations
Options and Accessories
Description and Model Differences
Option 521 Description (Agilent 66319B/D only)
3 - INSTALLATION
Installation and Operation Checklist
Inspection
Location
Input Connections
Output Connections
DVM Connections
External Protection and Trigger Input Connections
Digital I/O Connections
Computer Connections
4 - TURN-ON CHECKOUT
Checkout Procedure
In Case of Trouble
5 - FRONT PANEL OPERATION
Introduction
Front Panel Description
System Keys
Function Keys
Entry Keys
Examples of Front Panel Programming
6 - INTRODUCTION TO PROGRAMMING
External References
VXIplug&play Power Products Instrument Drivers
GPIB Capabilities of the DC Source
Introduction to SCPI
Types of SCPI Commands
2
3
5
6
6
7
9
9
10
10
11
12
12
13
14
15
15
16
16
17
21
23
23
24
25
26
26
34
36
38
38
39
39
41
43
43
43
45
46
49
50
59
59
60
61
61
62
7
Types of SCPI Messages
SCPI Data Formats
SCPI Command Completion
Using Device Clear
SCPI Conformance Information
7 - PROGRAMMING THE DC SOURCE
Introduction
Programming the Output
Triggering Output Changes
Making Basic Measurements
Making Enhanced Measurements
Making DVM Measurements
Triggered Measurements
Programming the Status Registers
Inhibit/Fault Indicator
8 - LANGUAGE DICTIONARY
Introduction
Calibration Commands
Display Commands
Measurement Commands
Output Commands
Status Commands
System Commands
Trigger Commands
Common Commands
A - SPECIFICATIONS
Specifications
Supplemental Characteristics
B - PERFORMANCE, CALIBRATION, AND CONFIGURATION
Introduction
Equipment Required
Measurement Techniques
Performance Tests
Constant Voltage (CV) Tests
Constant Current (CC) Tests
Resistance Tests
DVM Tests
Performance Test Equipment Form
Performance Test Record Form
Performing the Calibration Procedure
Performing the Configuration Procedure
C - ERROR MESSAGES
Error Number List
D - EXAMPLE PROGRAMS
Pulse Measurements
E - LINE VOLTAGE CONVERSION
8
63
65
66
66
67
69
69
69
71
73
74
77
78
82
87
89
89
94
97
98
108
117
121
122
130
137
137
138
141
141
141
142
143
144
146
150
151
151
152
154
159
161
161
165
165
171
相关推荐
2023年江西萍乡中考道德与法治真题及答案.doc
2012年重庆南川中考生物真题及答案.doc
2013年江西师范大学地理学综合及文艺理论基础考研真题.doc
2020年四川甘孜小升初语文真题及答案I卷.doc
2020年注册岩土工程师专业基础考试真题及答案.doc
2023-2024学年福建省厦门市九年级上学期数学月考试题及答案.doc
2021-2022学年辽宁省沈阳市大东区九年级上学期语文期末试题及答案.doc
2022-2023学年北京东城区初三第一学期物理期末试卷及答案.doc
2018上半年江西教师资格初中地理学科知识与教学能力真题及答案.doc
2012年河北国家公务员申论考试真题及答案-省级.doc
2020-2021学年江苏省扬州市江都区邵樊片九年级上学期数学第一次质量检测试题及答案.doc
2022下半年黑龙江教师资格证中学综合素质真题及答案.doc
