ARCHOS数码影音-Arnova 7cG2说明书.pdf-资料库

UserGuide_Arnova_7cG2_PN109940_book.pdf-第1页.png

第1页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第2页.png

第2页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第3页.png

第3页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第4页.png

第4页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第5页.png

第5页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第6页.png

第6页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第7页.png

第7页 / 共57页

UserGuide_Arnova_7cG2_PN109940_book.pdf-第8页.png

第8页 / 共57页

REGISTER YOUR PRODUCT! www ÄOn the web at http://arnovatech.com/register Thank you for choosing this ARNOVA product. We hope that you will enjoy using it and that it will give you satisfaction for many years to come. Once you unpack your ARNOVA product, we recommend that you take a few minutes to register it (http://arnovatech.com/register). This will allow you to get access to ARNOVA technical support (http://arnovatech.com/support). ? NEED HELP? SOFTWARE UPDATE On our Website: See the Frequently Asked Questions section on http://arnovatech.com/faq Contact our Technical Support Team: Visit http:// arnovatech.com/support for e-mail support. Please register your product before contacting Technical Support (see Register your Product). The ARNOVA operating system (the system that runs your device) is periodically updated to bring new features, improvements and bug fixes. Ä On the web at www.arnovatech.com > support&account > Downloads = firmware As we are often updating and improving our products, your device’s software may have a slightly different appearance or modified functionality than presented in this Quick Start Guide. E N G L I S H 0 4 9 9 0 1 N / P : 1

DESCRIPTION OF THE DEVICE Power Button: press and hold to switch on. - To switch off, when you press and hold on the Power button, a window appears with a list of options. Touch “Power Off” > “Ok” to fully shut down your ARNOVA. -To put your device in standby, press the Power button once. Volume buttons Built-in microphone Micro-SD card slot: a Micro-SD card should be inserted in the device. It allows the device to be identified as a removable storage when connected to a PC. SIM card slot: Any standard SIM card can be inserted. 6 8 6 7 9 Loudspeakers Headphone jack Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files via USB 2.0 or higher) . Power connector: to connect the supplied power cable. 1 2 3 4 5 6 7 9 8 9 10 Reset button: Your device is frozen.You can turn it off. Press the reset button. 4 1 2 3 5 10 Menu - gives menu options according to the current screen. Home - Short press: return to the Home screen. Hold: jump to one of the recent applications. Search - allows you to search for an item on the device or on the Internet. Back - returns to the previous screen. H S I L G N E 2

STARTING UP ▲! Before using your ARNOVA for the first time, completely charge the battery! Charging the Battery Connect the supplied power cable to the ARNOVA Power connector and to a wall outlet. The ARNOVA device will start charging. IMPORTANT: The device should not be charged via a USB port. E N G L I S H 3 12EURUK

H S I L G N E www CONNECTING TO A WIFI NETWORK For this procedure to work, you need to be in a WiFi zone that will allow you to connect to it. Every time the ARNOVA is in range of a network that you have already configured once, it will attempt to make a connection. 1 2 3 4 To configure a new WiFi network, go on the Home screen, tap on the Menu icon select Settings . , then In the Settings screen, select Wireless & networks. If the WiFi is off, tap on the Wi-Fi line to turn it on. Then select Wi-Fi settings. The ARNOVA will scan for available WiFi networks and display them at the bottom of the screen. Tap on the network you want to connect to, enter the required network information* and then tap on Connect. Your ARNOVA will now attempt to establish a connection to that WiFi hot spot with the network parameters you entered. * For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters) of the type WEP, WPA, or WPA2. To obtain the exact connection parameters required, contact the Internet service provider. 4

CONNECTING TO A 3G NETWORK Your Arnova 7c G2 is equipped with a SIM card slot. Any standard SIM card can be inserted. There is no provider restriction. Note that the Arnova 7c G2 will only have signal if you are in an area covered by your 3G provider’s 3G or EDGE network. Inserting your SIM card IMPORTANT: Before inserting a SIM card, you must turn off the device. Switch off the device. Insert the SIM card in the SIM card slot. Make sure to have the chip side up when you insert it. NOTE: If your device does not connect to your 3G provider’s network: 1. Contact your 3G provider to obtain the connection parameters. 2. On your device, tap the Menu icon, then settings. 3. Select Wireless & networks > Mobile networks. -In Network operators, select your operator. -In Access Point Names, select the correct access point name and enter the exact con- nection parameters. Turn on the device. A Pin number may be requested. Enter the SIM card pin number. Your device will attempt to connect to the 3G network of your provider. 1 2 3 4 E N G L I S H 5 Chip

CUSTOMIZING YOUR PRODUCT Customizing the Home screen items - To add a Home screen item (shortcuts, widgets, etc.), hold your finger on the screen at an empty location, then choose from , at the bottom of the screen. the list. You can also tap on the Menu icon and select Add - To move a Home screen item, hold your finger onto it until it gets larger, then drag it to the desired location, and release your finger. - To remove a Home screen item, hold your finger onto it, drag it onto the recycle bin (while you’re holding an item, the Applications tab, on the right side of the screen, turns into a recycle bin) and release your finger. Adding more applications with APPSLIB : With the ARNOVA connected to the Internet, tap on the AppsLib icon library of free and purchasable applications has thousands of fun games and useful applications to download and use. . This online Changing the Settings: From the Home screen, tap on the Menu icon and choose a category: Wireless controls, Sound & display, Date & time, etc. , tap on Settings H S I L G N E 6

THE ARNOVA INTERFACE Your ARNOVA device is equipped with a capacitive touchscreen. Use your finger pulp to navigate. Home Screen These are the default Android™ shortcuts (Web Browser, EMail, etc.). Tap on an icon to open the correspond- ing application. You can customize the Home screen by adding/removing shortcuts and widgets, changing the wallpaper, etc. See next page. The extended Home screen Slide your finger horizontally on the screen to go to the left or right side of the extended Home screen. Application button Tap on this icon to reveal all the An- droid™ applications installed on your ARNOVA (games, various tools, etc.). You can copy them onto the Home screen. You can get more Android™ applications from AppsLib . E N G L I S H 7

TRANSFERRING MEDIA TO YOUR ARNOVA IMPORTANT: A Micro-SD card should be inserted in the device. It works as your device storage. If there is no Micro-SD card, you can’t transfer files to your device. 1 2 3 Connect the supplied USB cable to the ARNOVA and to a running computer via USB 2.0 or higher. The ARNOVA will ask you if you want to connect it. Tap on Turn on USB storage to connect it and press OK to confirm. Within a few seconds the Micro-SD card will appear as an icon on your computer. You can transfer your media files to the Micro-SD card either by copy/pasting them into the respective folders using Windows® Explorer (or the Finder on a Mac®), or by using Windows Media® Player. Open Windows Media Player® and then use the Sync tab to synchronize your music, videos, and photos onto your Micro-SD card. See Windows Media Player®’s Help to learn more about this. 4 Once all your file transfers are finished, close Windows® Explorer and any other program that may have read or written to the Micro-SD card. Click on the ‘safely remove’ icon in the system tray, next to the clock. You can now unplug the USB cable. H S I L G N E 8 USB

资料库

ARCHOS数码影音-Arnova 7cG2说明书.pdf

相关推荐

数码影音

热门标签

最新资料