LG投影机-LXG120说明书.pdf-资料库

第1页 / 共44页

第2页 / 共44页

第3页 / 共44页

第4页 / 共44页

第5页 / 共44页

第6页 / 共44页

第7页 / 共44页

第8页 / 共44页

SAFETY INSTRUCTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: REFER LAMP REPLACEMENT TO QUALIFIED SERVICE PERSONNEL ONLY. . REGULATORY INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference when the equipment is operated in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm- ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: 3 Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product.

I N O T C U D O R T N I SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference. Observing the simple precautions discussed in this booklet can help you get many years of enjoyment and safe operation that are built into your new product. This product complies with all applicable U.S. Federal safety requirements, and those of the Canadian Standards Association. 1. Read Instructions All the safety and operating instruc- tions should be read before the prod- uct is operated. 2. Follow Instructions All operating and use instructions should be followed. 3. Retain Instructions The safety and operating instructions should be retained for future refer- ence. 4.Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 5. Cleaning Unplug this product from the wall out- let before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6. Water and Moisture Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. 7.Accessories Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, caus- ing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the prod- uct. Any mounting of the product should follow the manufacturer’s instructions, and should use a mount- ing accessory recommended by the manufacturer. 8. Transporting Product A product and cart combination should be moved with care. Quick PORTABLE CART WARNING 4

SAFETY INSTRUCTIONS stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 9. Attachments Do not use attachments not recom- mended by the product manufacturer as they may cause hazards. 10. Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or cov- ered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar sur- face. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufac- turer’s instructions have been adhered to. 11. Power Sources This product should be operated only from the type of power source indicat- ed on the marking label. If you are not sure of the type of power supply to your home, consult your product deal- er or local power company. For prod- ucts intended to operate from battery power, or other sources, refer to the operating instructions. 12. Line-Cord Polarization This product is equipped with a polar- ized alternating-current line plug (a plug having one blade wider than the 5 other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 13. Power-Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particu- lar attention to cords at plugs, conve- nience receptacles, and the point where they exit from the product. 14. Lightning For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent dam- age to the product due to lightning and power-line surges. 15. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid

I N O T C U D O R T N I SAFETY INSTRUCTIONS of any kind on the product. 17. Servicing Do not attempt to service this product yourself as opening or removing cov- ers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service person- nel. 18. Damage Requiring Service Unplug this product from the wall out- let and refer servicing to qualified ser- vice personnel under the following conditions: a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those con- trols that are covered by the oper- ating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a quali- fied technician to restore the prod- uct to its normal operation. e. If the product has been dropped or the cabinet has been damaged. f. If the product exhibits a distinct change in performance. 19. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other haz- ards. 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in prop- er operating condition. 21. Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 22. Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other prod- ucts (including amplifiers) that pro- duce heat. 23. Eye Protection Do not look directly into the lens when the projector is in use. Eye damage may occur. 6

Feature Locations Main Body Main Body Rear remote control sensor Speaker Power button Control panel R E W O P SOURCE BLANK VOL+ ENTER VOL- MENU Handle Horizontal leveler Front remote control sensor Zoom ring Foot Focus ring Lens cover Rear Connector Panel Rear Connector Panel Mouse Computer Audio Computer Out Computer In R Audio L/MONO Video S-Video AC K 7 Indicators Foot adjusting button Computer Out Computer Audio Mouse Computer In S-Video Audio / Video Main power button Kensington Security System Connector (Refer to page 12) Rear remote control sensor

I N O T C U D O R T N I Control Panel Control Panel MENU Button Selects or closes menus. Up/Down Buttons Selects menus and items in the menus. SOURCE Button Switches to PC or AV mode. MENU ENTER VOL- VOL+ SOURCE BLANK ENTER Button Checks present mode and saves the change of functions. VOLUME (Left/Right) Buttons Adjusts volume level and functions of menus. BLANK Button P O W E R POWER Button 8

资料库

LG投影机-LXG120说明书.pdf

相关推荐

投影机

热门标签

最新资料