bizhub PRO 920
Shortcut Manual
For detail informationA Please refer to the User Manual
PRO 920 Shortcut manual
Sub Switch
Main Switch
Power ON
To power on, please turn on the Main Switch A and then the Sub Switch
Power OFF
To power offA please turn off the Sub SwitchA and then the Main Switch (Please wait 10
seconds before restart the machine)
Warm-up takes aprox. 5.5 minutes. the machine will display message ”Ready to copy”
after the warm-up process completed.
Meter
1
Replace Toner
When Please add toner or this signal appears,
Please replace the toner
2
Place the original on the document feeder (max 100 sheets 80g/T , face up), or using
original glass (face down)
Separate Scan
Use the original glass to scan original unsuitable for the document feeder
1. Touch Separate Scan
2. Position originals, then press Start
-Using original glass:
Place original FACE DOW N, starts scanning from the first page, then repeat for all
originals
-Using ADF:
Position original FACE UP, if number exceeding 100 sheets, divides them into blocks.
3. After scan, touch Complete scan and press start
3
Input the length X and width Y
Change Paper Size
The capacity of the manual feed tray is 150 sheets (80g/T )
1. Touch Basic, and Paper
2. Choose manual feed tray, and touch Bypass Setting
3. Choose suitable paper (Thick, Thin, OHP Paper)
4. For custom size input, touch Custom
5.
6. Touch Ok
Density Adjustment
1. Touch Basic, and Density
2. Choose Lighter or Darker to adjust
4
Zoom
1.
2.
3.
Touch Basic, and Zoom
Touch desired ratio or touch XY Zoom to change the zoom ratio by input 4 digit ratio
Touch Ok to confirm
5
--Simplex / Duplex
Touch Simplex / Duplex
Can choose
a. Single side original to double side copy 1 4 2
b. Double side original to single side copy 2 4 1
c. Double side original to double side copy 2 4 2
6
Combine Originals
Lay out 2 pages (2in1)A or 4 pages onto one sheet (4in1)
Touch Combine Originals
Choose 2in1A 4in1
Special Orig.
1. Touch Combined Original
2. Touch Special Original
3. Touch Mixed Original
Bind
1. Combined Original
2. Touch Bind
Choose different binding direction
For example Left
Original Size
1. Touch Combined Original
2. Touch Original Size
3. Touch Custom Size
4. Choose different size for the original,
Or choose Full Area
Orig. Image Type
Choose different original type
Choose Dot Matrix for pencil written original
7