logo资料库

在arduino上使用315Mhz无线模块.pdf

第1页 / 共6页
第2页 / 共6页
第3页 / 共6页
第4页 / 共6页
第5页 / 共6页
第6页 / 共6页
资料共6页,全文预览结束
arduino315 mhz :315 mhz ,, ()/ Search :, , pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
1. : MX-FS-03V 2. :20-200 () 3. :3.5-12V 4. : 19 * 19mm 5. : AM 6. : 4KB / S Search 7. : 10mW 8. : 315Mh 9. : 25cm 10. : (DATA; VCC; GND) 1. : MX-05V 2. : DC5V 3. : 4mA 4. :315Mhz 5. :-105DB 6. : 30 * 14 * 7mm pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
,Arduino 1211 Search pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
Arduino: pin 12 VirtualWire /* VirtualWireArduino12 */ #include //VirtualWire void setup() { // Initialize the IO and ISR(IOISR) vw_setup(2000); // Bits per sec() } void loop() { send(”Hello there”);//Hello there delay(1000);//1000ms Search } void send (char *message)// { vw_send((uint8_t *)message, strlen(message));// vw_wait_tx(); // Wait until the whole message is gone() } --1212? :VirtualWire pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
Arduino: VirtualWire /* VirtualWireArduino11 */ #include byte message[VW_MAX_MESSAGE_LEN]; // byte messageLength = VW_MAX_MESSAGE_LEN; // void setup() { Serial.begin(9600);//9600 Serial.println(”Device is ready”);//‘Device is ready’ // Initialize the IO and ISR(IOISR) vw_setup(2000); // Bits per sec() vw_rx_start(); // Start the receiver() } void loop() { if (vw_get_message(message, &messageLength)) // Non-blocking { Serial.print(”Received: “);//’Received: ’ for (int i = 0; i < messageLength; i++) { Serial.write(message[i]);// } Serial.println();// } } Search pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
, Search pdfcrowd.com 该文档是极速PDF编辑器生成,如果想去掉该提示,请访问并下载:http://www.jisupdfeditor.com/
分享到:
收藏