MULTIMEDIA PROJECTOR
MODEL LC-X990
OWNER’S INSTRUCTION MANUAL
INFORMATION TO THE USER
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
This Projector has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit
into the power outlet. Do not try to defeat this safety feature.
This projector produces intense light from the projection lens. Do not stare directly into the lens as
possible eye damage could result. Be especially careful that children do not stare directly into the beam.
The Remote Control Unit, supplied to this projector, emits the laser beam as the Laser Pointer function
from the Laser Light Window while pressing the LASER button (for 1 minute). Do not look into the Laser
Light Window or shine the laser beam on yourself or other people. Eye damage may result.
This projector should be set in the way indicated. If not, it may result in fire hazard.
If the Projector will not be used for an extended time, unplug the new Projector from the power outlet.
READ AND KEEP THIS OWNER’S MANUAL FOR LATER USE.
IMPORTANT:
For your protection in the event of theft or loss of this LC Data-Grade
projector, please record the Model Number and Serial Number located Model No LC-X990
on the rear of unit and retain this information. Refer to these numbers
whenever you call upon your authorized dealer regarding this product. Serial No __________________________
Do not discard shipping carton and packing materials.
These items may be needed for storage or future servicing.
the
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners. Use
a damp cloth for cleaning.
Do not use attachments not recommended by
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a
child or adult, and serious damage to the projector. Use
only with a cart or stand recommended by
the
manufacturer, or sold with the projector. Wall or shelf
mounting should follow the manufacturer’s instructions,
and should use a mounting kit approved by
the
manufacturer.
Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Slots and openings in the back and bottom of the cabinet
are provided for ventilation, to insure reliable operation of
the equipment and to protect it from overheating.
The openings should never be covered with cloth or other
material, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other
similar surface. This projector should never be placed near
or over a radiator or heat register.
This projector should not be placed in a built-in
installation such as a bookcase unless proper ventilation is
provided.
This projector should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power supplied, consult your
authorized dealer or local power company.
Do not overload wall outlets and extension cords as this
can result in fire or electric shock. Do not allow anything
to rest on the power cord. Do not locate this projector
where the cord may be damaged by persons walking on it.
Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric
shock. Never spill liquid of any kind on the projector.
Do not attempt to service this projector yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
Unplug this projector from wall outlet and refer servicing
to qualified service personnel under
the following
conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions as
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
e. If the projector has been dropped or the cabinet has
been damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks
to determine that the projector is in
safe operating condition.
This projector is equipped with a
grounding type AC line plug. Should
you be unable to insert the plug into
the outlet, contact your electrician.
Do not defeat the safety purpose of
this grounding type plug.
Follow all warnings and instructions marked on the
projectors.
For added protection to the projector during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will
prevent damage due to lightning and powerline surges.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
If the projector is to be built into a compartment or
similarly enclosed, the minimum distances must be
maintained.
Do not cover the ventilation slot on the projector.
Heat build-up can reduce the service life of your projector,
and can also be dangerous.
PAGE
6-9
7
8
9
FEATURES AND DESIGN
5
5
COMPATIBILITY
IMAGE RESOLUTION
5
AUTOMATIC MULTISCANNING SYSTEM 5
MULTILANGUAGE MENU DISPLAY
5
5
LASER POINTER FUNCTION
5
OTHER FEATURES
UNPACKING THE PROJECTOR
5
TRADEMARKS
5
INSTALLATION
NAME OF EACH PART OF THE PROJECTOR 6
SETTING-UP THE PROJECTOR
MOVING THE PROJECTOR
POWER REQUIREMENTS
CONNECTING THE. PROJECTOR 10-18
TERMINAL OF THE PROJECTOR
CONNECTING THE COMPUTER
CONNECTING THE VIDEO EQUIPMENT
19-26
BEFORE OPERATION
CONTROLS AND INDICATORS
19-20
OPERATION OF THE REMOTE CONTROL 21-23
CONTROL THE PROJECTOR
24-26
24
DIRECT OPERATION
MENU OPERATION
25-26
BASIC OPERATION
TURNING ON/OFF THE PROJECTOR
DIRECT OPERATION
MODE SELECT
DIGITAL ZOOM FUNCTION
KEYSTONE FUNCTION
NO SHOW FUNCTION
SOUND VOLUME ADJUSTMENT
SOUND MUTE FUNCTION
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
10
11-15
16-18
27-31
27
27-29
27
28
28
28
28
28
28
29
29
29
29
29
P-TIMER FUNCTION
NORMAL PICTURE FUNCTION
AUTO IMAGE FUNCTION
FREEZE PICTURE FUNCTION
PAGE
36-48
36
30-31
30
31
31
32-35
32
33
34
35
MENU OPERATION
MODE SELECT
SOUND ADJUSTMENT
LANGUAGE ADJUSTMENT
VIDEO MODE
COLOR SYSTEM SELECT
VIDEO SOURCE SELECT
PICTURE IMAGE ADJUSTMENT
PICTURE SCREEN ADJUSTMENT
COMPUTER MODE
COMPUTER SYSTEM SELECT
COMPATIBLE COMPUTER SPECIFICATIONS 37
AUTO IMAGE FUNCTION
PICTURE IMAGE ADJUSTMENT
PICTURE POSITION ADJUSTMENT
PC ADJUSTMENT
PICTURE SCREEN ADJUSTMENT
OTHER FUNCTION SETTING
BLUE BACK
DISPLAY
CEILING
REAR
SPLIT WIPE
POWER MANAGEMENT
REMOTE CONTROL (Mode 1 or Mode 2)
LAMP AGE
APPENDIX
MAINTENANCE
TEMPERATURE WARNING INDICATOR 49
49
AIR FILTER CARE AND CLEANING
LAMP REPLACEMENT
50
51
CLEANING THE LENS
51-52
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
53
46-48
46-47
46-47
46-47
46-47
46-47
46-47
46-47
48
38
39
40
41-44
45
49-53
49-51
The projector is a multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive
controls. Built-in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal
display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that
demand exceptional color quality.
This projector has Motor Zoom/Focus, No Show,
Picture Freeze, Keystone, Mute Functions.
The projector comes with the parts listed below.
Check to
find all the parts are included. If any parts are
missing,
contact an authorized dealer or service station.
• Owner’s Manual.
• AC Power Cord.
• Remote Control Unit.
• Batteries for Remote Control Units.
• VGA Cable.
• Mouse Cable for PS/2 port.
• Mouse Cable for serial port.
• Mouse Cable for ADB port.
• VGA/MAC Adapter.
• Protective Dust Cover.
• Lens Cover.
• Apple, Macintosh, and PowerBook are
trademarks or registered
trademarks of Apple
Computer, Inc.
•
IBM and PS/2 are trademarks or registered
trademarks of International Business Machines, Inc.
• Windows is a trademarks or registered trademarks
of Microsoft Corporation.
• Other trademarks are the property of their
respective owners
The projector is compatible with many different
types of personal computers and video devices,
including:
•
IBM-compatible computers, including laptops, up
to 1280 x 1024 resolution.
• Apple Macintosh and PowerBook computers up
to 1280 x 1024 resolution.
• Various VCRs, video disc players, video
cameras, DVD players, satellite TV tuners or
other AV equipment using any of the worldwide
video standards, including NTSC, NTSC4.43,
PAL, PAL-M, PAL-N and SECAM.
The resolution of the projector’s projected image is
1024 x 768. The projector displays computer
images just as they appear on your computer’s
monitor. Screen resolutions between 1024 x 768
and 1280 x 1024 are compressed to 1024 x 768.
The projector cannot display screen resolutions
above 1280 x 1024. If your computer’s screen
resolution is higher than 1280 x 1024, reset it to a
lower resolution before you connect the projector.
This projector can detect display signals from most
personal computers currently distributed. It is free from
complicated adjustments to project picture images
from PC.
MENU DISPLAY
German, French, Italian, Spanish and Japanese.
is displayed with
; English,
The Remote Control Unit of this projector includes
the Laser Pointer function providing the ability to
point and highlight during presentations.
Picture tilt and projection angle can be adjusted by rotating the
ADJUSTABLE FEET. Projection angle can be adjusted 0 to 6°.
1. Lift the front of the projector and press the FEET LOCK
LATCHES on both sides of the projector.
2. Release the FEET LOCK LATCHES to lock the ADJUSTABLE
FEET and rotate the ADJUSTABLE FEET to fine tune the
position and the tilt.
3. To shorten the ADJUSTABLE FEET, lift the front of the projector
and press and undo the FEET LOCK LATCHES.
NOTE: The position and the keystone distortion of the image can also
be adjusted using the KEYSTONE function.
(See pages 28, 35 and 45).
Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet
when moving the projector to prevent damage to the
projector.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
• Do not drop or bump the projector, otherwise damages or malfunctions may result.
• When transporting the projector, use a Eiki recommended Carrying Case.
• Do not transport the projector by using a courier or transport service in an unsuitable transport case.
This may cause damage to the projector. To transport the projector through a courier or transport service, use a
Eiki recommended Case.
• For a carrying or transportation cases, contact a Eiki authorized dealer.