Description
Features
Device Structure
Absolute Maximum Ratings
Application Conditions
USE RESTRICTION NOTICE
Optical Center
Pixel Arrangement
Block Diagram and Pin Configuration
Pin Description
Electrical Characteristics
DC Characteristics
Current Consumption
AC Characteristics
Master Clock Waveform (INCK)
XVS / XHS Input Characteristics In Slave Mode (XMASTER pin = High)
XVS / XHS Input Characteristics In Master Mode (XMASTER pin = Low)
Serial Communication
DLCKP / DLCKM, DLOP / DLOM
I/O Equivalent Circuit Diagram
Spectral Sensitivity Characteristics
Image Sensor Characteristics
Zone Definition
Image Sensor Characteristics Measurement Method
Measurement Conditions
Color Coding of Physical Pixel Array
Definition of standard imaging conditions
Measurement Method
Setting Registers Using Serial Communication
Description of Setting Registers (4-wire)
Register Communication Timing (4-wire)
Register Write and Read (4-wire)
Description of Setting Registers (I2C)
Register Communication Timing (I2C)
Communication Protocol
Register Write and Read (I2C)
Single Read from Random Location
Single Read from Current Location
Sequential Read Starting from Random Location
Sequential Read Starting from Current Location
Single Write to Random Location
Sequential Write Starting from Random Location
Register Map
Readout Drive mode
Sync code (Serial LVDS output)
Sync Code Output Timing
Image Data Output Format (CSI-2 output)
Frame Format
Frame Structure
Embedded Data Line
Image Data Output Format
All-pixel scan mode (Full HD 1080p)
Window Cropping Mode
HD720p mode
Description of Various Function
Standby Mode
Slave Mode and Master Mode
Gain Adjustment Function
Black Level Adjustment Function
Normal Operation and Inverted Operation
Shutter and Integration Time Settings
Example of Integration Time Setting
Normal Exposure Operation (Controlling the Integration Time in 1H Units)
Long Exposure Operation (Control by Expanding the Number of Lines per Frame)
Example of Integration Time Settings
Signal Output
Output Pin Settings
CSI-2 output
MIPI Transmitter
Output Pin Bit Width Selection
Number of Internal A/D Conversion Bits Setting
Output Rate Setting
Output Signal Range
INCK Setting
Register Hold Setting
Software Reset (Low voltage LVDS serial only)
Mode Transitions
Power-on and Power-off Sequence
Power-on sequence
Power-off sequence
Sensor Setting Flow
Setting Flow in Sensor Slave Mode
Setting Flow in Sensor Master Mode
Peripheral Circuit
Spot Pixel Specifications
Zone Definition
Notice on White Pixels Specifications
Measurement Method for Spot Pixels
Spot Pixel Pattern Specification
Marking
Notes On Handling
Package Outline
List of Trademark Logos and Definition Statements
Revision History