Mobile Device 
 
SM-G950D/SM-G950J 
Common 
 
 
CONTENTS 
1.  Safety Precautions 
2.  Specification 
3.  Product Function 
4.   Exploded View and Parts list  
5.   MAIN Electrical Parts List 
6.   Level 1 Repair 
7.   Level 2 Repair 
8.   Level 3 Repair 
9.   Reference data 
Notice: All functionality, features, specifications, 
and other product information provided in this 
document, including but not limited to, benefits, 
design, pricing, components, performance, 
availability, and capabiliti-es of the product are 
subject to change without notice. Samsung 
reserves the right to alter this doc-ument or the 
product described herein at anytime, without 
obligation to provide notification of such 
changes. 
 
 
 
1. Safety Precautions 
 
 
1-1. Repair Precaution 
 
Before attempting any repair or detailed tuning, shield the device from RF noise or static   
electricity discharges. 
 
Use only demagnetized tools that are specifically designed for small electronic repairs,   
as most electronic parts are sensitive to electromagnetic forces.   
 
Use only high quality screwdrivers when servicing products. Low quality screwdrivers can   
easily damage the heads of screws. 
 
Use only conductor wire of the properly gauge and insulation for low resistance, because of the low margin 
of error of most testing equipment. 
We recommend 22-gauge twisted copper wire. 
 
Hand-soldering is not recommended, because printed circuit boards (PCBs) can be easily   
damaged, even with relatively low heat. Never use a soldering iron with a power rating of   
more than 100 watts and use only lead-free solder with a melting point below 250°C (482°F). 
 
Prior to disassembling the battery charger for repair, ensure that the AC power is disconnected. 
Always use the replacement parts that are registered in the SEC system. Third-party replacement parts 
may not function properly. 
 
 
 
 
 
 
 
 
1. Safety Precautions 
 
 
1-2. ESD(Electrostatically Sensitive Devices) Precaution   
 
Many semiconductors and ESDs in electronic devices are particularly sensitive to static discharge and can 
be easily damaged by it. We recommend protecting these components with conductive anti-static bags 
when you store or transport them. 
 
Always use an anti-static strap or wristband and remove electrostatic buildup or dissipate   
static electricity from your body before repairing ESDs. 
 
Ensure that soldering irons have AC adapter with ground wires and that the ground wires are properly 
connected. 
 
Use only desoldering tools with plastic tips to prevent static discharge. 
 
Properly shield the work environment from accidental electrostatic discharge before opening   
packages containing ESDs. 
 
The potential for static electricity discharge may be increased in low humidity environments,   
such as air-conditioned rooms. Increase the airflow to the working area to decrease the   
chance of accidental static electricity discharges. 
 
 
 
 
 
6. Level 1 Repair 
 
 
 
6-1.  S/W  Download 
 
6-1-1.  Prepare  for  S/W  Downloading 
  
  Installation program: Downloader Program (Odin3 v3.12.10.exe) 
  Mobile Phone 
  Data Cable 
  Mobile device specific S/W: Binary files 
  
※ Settings 
  
 
 
 
 
 
 
Data Cable : GH39-01887A 
 
 
 
 
2. Specification 
 
 
2-1. LTE General Specification 
 
 
Tx Freq. range 
GPS 
 
LTE FDD B1 
LTE FDD B3 
LTE FDD B19 
1920~1980 MHz 
1710~1785 MHz 
830~845 MHz 
Rx Freq. range 
1575.42MHz 
2110~2170 MHz 
1805~1880 MHz 
875~890 MHz 
Channel Bandwidth 
2MHz 
5, 10,15, 20 MHz 
5, 10,15, 20 MHz 
5, 10, 15 MHz 
Channel Spacing 
Not Used 
100KHz 
100KHz 
100KHz 
Number of Channel 
Duplex Separation 
Modulation 
Tx Local Frequency 
1 
- 
- 
- 
Rx Local Frequency 
FRx * 2 
Frequency Stability 
 
25, 50, 75, 100 
25, 50, 75, 100 
25, 50, 75 
90MHz 
95MHz 
45 MHz 
Uplink 
Uplink 
Uplink 
DCM : QPSK/16QAM 
DCM : QPSK/16QAM 
DCM : QPSK/16QAM 
KDDI : QPSK/16QAM/64QAM 
KDDI : QPSK/16QAM/64QAM 
KDDI : QPSK/16QAM/64QAM 
Downlink 
DCM : 
Downlink 
DCM : 
Downlink 
DCM : 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
KDDI : 
KDDI : 
KDDI : 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
 
 
 
 
 
 
 
 
 
Operating 
Temperature 
 
 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
 
 
 
2. Specification 
 
 
 
LTE FDD B21 
LTE FDD B26 
LTE FDD B28 
LTE TDD B41 
Tx Freq. range 
1447.9~1462.9 MHz 
814 ~ 849 MHz 
703~748 MHz 
2496 ~ 2690 MHz 
Rx Freq. range 
1495.9~1510.9 MHz 
859 ~ 894 MHz 
758~803 MHz 
2496 ~ 2690 MHz 
Channel 
Bandwidth 
5, 10, 15 MHz 
1.4, 3, 5, 10 MHz 
5, 10, 15, 20 MHz 
5, 10, 15, 20 MHz 
Channel Spacing 
100KHz 
100Khz 
100KHz 
100KHz 
Number of 
Channel 
Duplex 
Separation 
25, 50, 75 
6, 15, 25, 50, 75 
25, 50, 75,100 
25, 50, 75,100 
48 MHz 
45 MHz 
55 MHz 
N/A 
Uplink 
Uplink 
Uplink 
Uplink 
DCM : QPSK/16QAM 
DCM : QPSK/16QAM 
DCM : QPSK/16QAM 
DCM : QPSK/16QAM 
KDDI : QPSK/16QAM/64QAM 
KDDI : QPSK/16QAM/64QAM 
KDDI : QPSK/16QAM/64QAM 
KDDI : QPSK/16QAM/64QAM 
Type of Emission 
Downlink 
DCM : 
Downlink 
DCM : 
Downlink 
DCM : 
Downlink 
DCM : 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
KDDI : 
KDDI : 
KDDI : 
KDDI : 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
QPSK/16QAM/64QAM/256QAM 
Tx Local 
Frequency 
Rx Local 
Frequency 
Frequency Stabilit
y 
Operating 
Temperature 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
-30℃ ~ +60℃ 
 
 
 
2. Specification 
 
 
2-2. GSM/WCDMA General Specification 
 
 
GSM850  
EGSM 900  
DCS1800  
PCS1900  
WCDMA 
2100  
WCMDA 
850  
Freq.  
Band[MHz]  
Uplink/  
Downlink  
824~849  
869~894  
880~915  
925~960  
1710~1785  
1805~1880  
1850~1910  
1930~1990  
1922~1977  
2112~2167  
824~849  
869~894  
ARFCN range  
128~251  
0~124 
& 975~1023
512~885  
512~810  
UL:  
DL:  
9612~9888  
4132~4233  
10562~10838  
4357~4458  
UL:  
DL:  
Tx/Rx spacing  
45MHz  
45MHz  
95MHz  
80MHz  
190MHz  
45MHz  
Mod. Bit rate/  
Bit Period  
270.833kbps
3.692us  
270.833kbps
3.692us  
270.833kbps
3.692us  
270.833kbps
3.692us  
3.84Mcps  
3.84Mcps  
Time Slot 
Period/  
Frame Period  
576.9us  
4.615ms  
576.9us  
4.615ms  
576.9us  
4.615ms  
576.9us  
4.615ms  
FrameLength:  
FrameLength:
10ms  
Slotlength:  
0.667ms  
10ms  
Slotlength:  
0.667ms  
Modulation  
0.3GMSK  
0.3GMSK  
0.3GMSK  
0.3GMSK  
QPSKHQPSK   QPSKHQPSK
MS Power  
33dBm~5dBm 33dBm~5dBm 30dBm~0dBm 30dBm~0dBm
24dBm~  
-50dBm  
24dBm~  
-50dBm  
Power Class  
5pcl ~ 19pcl
5pcl ~ 19pcl 
0pcl ~ 15pcl 
0pcl ~ 15pcl 
3(max+24dBm) 
3(max+24dBm)
Sensitivity  
-102dBm  
-102dBm  
-100dBm  
-100dBm  
-106.7dBm  
-106.7dBm  
TDMA Mux 
8  
8  
8  
8  
8  
8  
Cell Radius  
35Km  
35Km  
2Km  
2Km  
2Km  
2Km