华擎主板-K7NF2-RAID说明书.pdf-资料库

第1页 / 共88页

第2页 / 共88页

第3页 / 共88页

第4页 / 共88页

第5页 / 共88页

第6页 / 共88页

第7页 / 共88页

第8页 / 共88页

Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Disclaimer: Disclaimer: Disclaimer: Disclaimer: Disclaimer: Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ASRock Website: http://www.asrock.com Published March 2005 Copyright©2005 ASRock INC. All rights reserved. h h h h h s s s s s i i i i i l l l l l g g g g g n n n n n E E E E E ASRock K7NF2-RAID Motherboard 11111

Motherboard L Motherboard L ayout ayout Motherboard Layout ayout Motherboard L Motherboard L ayout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PS2_USB_PWR1 Jumper FID Jumpers (FID0, FID1, FID2, FID3, FID4) CPU Socket North Bridge Controller CPU Fan Connector (CPU_FAN1) 184-pin DDR DIMM Slots (DDR1- 3) AGP Slot (AGP1) Secondary Serial ATA Connector (SATA2) Primary Serial ATA Connector (SATA1) South Bridge Controller Primary IDE Connector (IDE1, Blue) Secondary IDE Connector (IDE2, Black) Chassis Fan Connector (CHA_FAN1) System Panel Connector (PANEL1) Chassis Speaker Connector (SPEAKER 1) 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Infrared Module Connector (IR1) USB 2.0 Header (USB67, Blue) Floppy Connector (FLOPPY1) Game Connector (GAME1) JR1 / JL1 Jumpers Front Panel Audio Connector (AUDIO1) Flash Memory PCI Slots (PCI1- 5) Clear CMOS Jumper (CLRCMOS2) Internal Audio Connector: AUX1 (White) Internal Audio Connector: CD1 (Black) ATX Power Connector (ATXPWR1) Shared USB 2.0 Header (USB45E, Blue) FSB Select Jumper (FSB_SEL1) FSB Select Jumper (FSB_SEL0) ASRock K7NF2-RAID Motherboard E E E E E n n n n n g g g g g l l l l l i i i i i s s s s s h h h h h 22222

ASRock I/O Plus ASRock I/O Plus ASRock I/O PlusTMTMTMTMTM ASRock I/O Plus ASRock I/O Plus 1 2 3 4 5 6 Parallel Port RJ-45 Port Line In (Light Blue) Line Out (Lime) Microphone (Pink) USB 2.0 Ports (USB45) 7 8 9 10 11 USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) Serial Port: COM1 PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green) h h h h h s s s s s i i i i i l l l l l g g g g g n n n n n E E E E E ASRock K7NF2-RAID Motherboard 33333

1. Introduction 1. Introduction 1. Introduction 1. Introduction 1. Introduction Thank you for purchasing ASRock K7NF2-RAID motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest memory and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com 1.1 Package Contents 1.1 Package Contents 1.1 Package Contents 1.1 Package Contents 1.1 Package Contents ASRock K7NF2-RAID Motherboard (ATX Form Factor: 12.0-in x 7.8-in, 30.5 cm x 19.8 cm) ASRock K7NF2-RAID Quick Installation Guide ASRock K7NF2-RAID Support CD One 80-conductor Ultra ATA 66/100/133 IDE Ribbon Cable One Ribbon Cable for a 3.5-in Floppy Drive One Serial ATA (SATA) Cables One Serial ATA (SATA) HDD Power Cable (Optional) One ASRock I/O PlusTM Shield One Game Port Bracket (Optional) E E E E E n n n n n g g g g g l l l l l i i i i i s s s s s h h h h h 44444 ASRock K7NF2-RAID Motherboard

1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications Platform: CPU: Chipsets: ATX Form Factor (12.0-in x 7.8-in, 30.5-cm x 19.8-cm) Supports Socket A (462 pins) for AMD AthlonTM / AthlonTM XP / SempronTM / DuronTM processor North Bridge: nVidia nForce 2 Ultra 400, FSB @ 400/333/266/200 MHz, AGP 8X; South Bridge: Memory: 3 DDR DIMM slots: DDR1, DDR2, and DDR3 MCP-RAID, supports USB 2.0, ATA 133, SATA 1.5Gb/s PC2100 (DDR266) / PC2700 (DDR333) / PC3200 (DDR400) for 3 DDR DIMM slots, Max. 3GB; IDE: Serial ATA: IDE1: ATA 133 / Ultra DMA Mode 6; IDE2: ATA 133 / Ultra DMA Mode 6; Supports up to 4 IDE devices 2 SATA connectors, support up to 2 SATA devices at1.5Gb/s data transfer rate (Not Support “Hot Plug” function) Supports up to 2 floppy disk drives 5.1 channels AC’97 Audio Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN Floppy Port: Audio: LAN: Hardware Monitor: CPU temperature sensing; PCI slots: AGP slot: USB 2.0: Chassis temperature sensing; CPU overheat shutdown to protect CPU life (ASRock U-COP)(see CAUTION 1); CPU fan tachometer; Chassis fan tachometer; Voltage monitoring: +12V, +5V, +3.3V, Vcore 5 slots with PCI Specification 2.3 1 AGP slot, supports 1.5V, AGP 8X card (see CAUTION 2) 8 USB 2.0 ports: includes 6 default USB 2.0 ports on the rear panel, plus two headers to support 2 additional USB 2.0 ports (see CAUTION 3) ASRock I/O PlusTM: 1 PS/2 keyboard port, 1 PS/2 mouse port; 1 serial port: COM1; 1 parallel port: ECP/EPP support; 1 RJ 45 port; 6 default USB 2.0 ports; Audio Jack: Line Out / Line In / Microphone h h h h h s s s s s i i i i i l l l l l g g g g g n n n n n E E E E E ASRock K7NF2-RAID Motherboard 55555

BIOS: OS: AMI legal BIOS; Supports “Plug and Play”; ACPI 1.1 compliance wake up events; SMBIOS 2.3.1 support; CPU frequency stepless control (only for advanced users’ reference, see CAUTION 4) Microsoft® Windows® 98 SE / ME / 2000 / XP compliant CAUTION! 1. While CPU overheat is detected, the system will automatically shutdown. Please check if the CPU fan on the motherboard functions properly before you resume the system. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system. 2. Do NOT insert a 3.3V AGP card into the AGP slot of K7NF2-RAID motherboard! It may cause permanent damage! 3. Power Management for USB 2.0 works fine under Microsoft® Windows® XP SP1/2000 SP4. It may not work properly under Microsoft® Windows® 98/ME. 4. Although K7NF2-RAID offers stepless control, it is not recommended to perform over clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU. The CPU host frequency of this motherboard is determined by the jumper- setting. You must set the FSB jumper according to your AMD CPU before you use the “Manual” option as the FSB setting in BIOS setup to perform over clocking. Please check page 24 of “User Manual” in the Support CD for details. E E E E E n n n n n g g g g g l l l l l i i i i i s s s s s h h h h h 66666 ASRock K7NF2-RAID Motherboard

2. Installation 2. Installation 2. Installation 2. Installation 2. Installation Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3. Hold components by the edges and do not touch the ICs. 4. Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. 2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation STEP 1: Unlock the socket by lifting the lever up to a 90o angle. STEP 2: Position the CPU directly above the socket such that its marked corner matches the base of the socket lever. STEP 3: Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins. STEP 4: When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked. Install CPU fan and heatsink. For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink vendors. STEP 5: h h h h h s s s s s i i i i i l l l l l g g g g g n n n n n E E E E E ASRock K7NF2-RAID Motherboard 77777

2.22.22.22.22.2 Installation of Memory Modules (DIMM) Installation of Memory Modules (DIMM) Installation of Memory Modules (DIMM) Installation of Memory Modules (DIMM) Installation of Memory Modules (DIMM) K7NF2-RAID motherboard provides three 184-pin DDR (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology. To enable Dual-Channel mode, you need to install 2 DIMMs into DDR1 and DDR3 slots. Although this chipset can work on the Dual-Channel mode with 2 different modules, we recommend users to use two identical (the same brand, speed, size and chip-type) memory modules in the DDR DIMM slots for optimized performance. If you install only one memory module, please install it on DDR1 first. If you install 2 memory modules, please install them on DDR1 and DDR3. Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. E E E E E n n n n n g g g g g l l l l l i i i i i s s s s s h h h h h 88888 The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock K7NF2-RAID Motherboard

资料库

华擎主板-K7NF2-RAID说明书.pdf

相关推荐

主板

热门标签

最新资料