PV-GS55PP_Eng.book 1 ページ 2004年2月10日 火曜日 午前11時51分
Operating Instructions
Digital Video Camcorder
Model No. PV-GS55
Before attempting to connect, operate or adjust this product,
please read these instructions thoroughly.
Spanish Quick Use Guide is included.
Guía para rápida consulta en español está incluida.
Mini
For USA assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
For Canadian assistance, please call: 1-800-561-5505 or visit us at www.panasonic.ca
LSQT0760 B
PV-GS55PP_Eng.book 2 ページ 2004年2月10日 火曜日 午前11時51分
Things You Should Know
Thank you for choosing Panasonic!
You have purchased one of the most
sophisticated and reliable products on the
market today. Used properly, we’re sure it will
bring you and your family years of enjoyment.
Please take time to fill in the information on the
right.
The serial number is on the tag located on the
underside of your Palmcorder. Be sure to retain
this manual as your convenient Palmcorder
information source.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
Safety Precautions
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Your
Ò
(LP) mode
It is recommended that only cassette tapes that have been tested and inspected for use in Palmcorder
with the
Palmcorder is designed to record and play back in Standard Play (SP) mode and Long Play
Ò
mark be used.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
AC Adaptor
≥The rating plate is on the underside of the AC Adaptor.
This symbol warns the user
that uninsulated voltage within
the unit may have sufficient
magnitude to cause electric
shock.
Therefore, it is dangerous to
make any kind of contact with
any inside part of this unit.
This symbol alerts the user that
important literature concerning
the operation and maintenance
of this unit has been included.
Therefore, it should be read
carefully in order to avoid any
problems.
-2-
PV-GS55PP_Eng.book 3 ページ 2004年2月10日 火曜日 午前11時51分
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
≥Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use
only shielded interface cables with ferrite core when connecting to computer or peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
Panasonic
PV-GS55
Declaration of Conformity
Trade Name:
Model No.:
Responsible party: Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094
Panasonic Consumer Electronics Company
1-800-211-PANA (7262)
Support Contact:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: TO PREVENT FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE
RECOMMENDED ACCESSORIES ONLY.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE
ONLY WITH THE SAME OR EQUIVALENT TYPE.
≥Since this product gets hot during use, operate it in well ventilated place; do not install this equipment
in a confined space such as a bookcase or similar unit.
WARNING
AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO
NOT ALLOW CHILDREN TO HANDLE THE SD CARD.
PV-GS55
-3-
PV-GS55PP_Eng.book 4 ページ 2004年2月10日 火曜日 午前11時51分
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or the table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when it will be left unused for
long periods of time.
S3125A
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
-4-
PV-GS55PP_Eng.book 5 ページ 2004年2月10日 火曜日 午前11時51分
Precautions
U S E & L O C A T I O N
WARNING
≥T O A V O I D S H O C K H A Z A R D ... Your
Palmcorder and power supply should not be
exposed to rain or moisture. Do not connect the
power supply or operate your Palmcorder if it
gets wet. Your Palmcorder has been designed
for outdoor use, however it is not designed to
sustain direct exposure to water, rain, sleet,
snow, sand, dust, or a direct splashing from a
pool or even a cup of coffee. This action could
permanently damage the internal parts of your
Palmcorder. Do not attempt to disassemble this
unit. There are no user serviceable parts inside.
Unplug your Palmcorder from the power supply
before cleaning.
CAUTION
≥D O N O T A I M Y O U R P A L M C O R D E R A T T H E
S U N O R O T H E R B R I G H T O B J E C T S
≥D O N O T L E A V E T H E P A L M C O R D E R W I T H
T H E E V F A I M E D D I R E C T L Y A T T H E S U N A S
T H I S M A Y C A U S E D A M A G E T O T H E
I N T E R N A L P A R T S O F T H E E V F
≥D O N O T E X P O S E Y O U R P A L M C O R D E R T O
E X T E N D E D H I G H T E M P E R A T U R E
Such
as, in direct sunlight, inside a closed car, next
to a heater, etc... This action could permanently
damage the internal parts of your Palmcorder.
.
.
.
≥A V O I D S U D D E N C H A N G E S
I N
.
.
.
T E M P E R A T U R E
If the unit is suddenly
moved from a cold place to a warm place,
moisture may form on the tape and inside the
unit.
≥D O N O T L E A V E Y O U R P A L M C O R D E R O R
T H E P O W E R S U P P L Y T U R N E D O N W H E N
N O T
I N U S E .
≥S T O R A G E O F Y O U R P A L M C O R D E R
.
.
.
Store
and handle your Palmcorder in a manner that
will not subject it to unnecessary movement
(avoid shaking and striking). Your Palmcorder
contains a sensitive pick-up device which could
be damaged by improper handling or storage.
C A R E
≥T O C L E A N Y O U R P A L M C O R D E R
.
.
.
Do not
use strong or abrasive detergents when cleaning
your Palmcorder body.
≥T O P R O T E C T T H E L E N S
.
.
.
Do not touch the
surface of the lens with your hand. Use a
commercial Palmcorder lens solution and lens
paper when cleaning the lens. Improper cleaning
can scratch the lens coating.
≥T O P R O T E C T T H E F I N I S H O F Y O U R
.
.
.
Before handling your
P A L M C O R D E R
Palmcorder, make sure your hands and face are
free from any chemical products, such as suntan
lotion, as it may damage the finish.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited
viewing.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
This class B digital apparatus complies with CANADIAN ICES-003.
U.S.A./CANADA CONSUMERS: ATTENTION:
A lithium ion/polymer battery that is recyclable powers the product
you have purchased. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
-5-
PV-GS55PP_Eng.book 6 ページ 2004年2月10日 火曜日 午前11時51分
Before opening the CD-ROM package, please read the following.
End User License Agreement (for USB Driver, WebCam Driver
and DV STUDIO)
You (“Licensee”) are granted a license for the Software defined in this End User Software Agreement
(“Agreement”) on condition that you agree to the terms and conditions of this Agreement. If Licensee
does not agree to the terms and conditions of this Agreement, promptly return the Software to
Matsushita Electric Industrial Co., Ltd. (“Matsushita”), its distributors or dealers from which you made
the purchase.
License
Article 1
Licensee is granted the right to use the software, including the information recorded or described on
the CD-ROM, instruction manuals, and any other media provided to Licensee (collectively “Software”),
but all applicable rights to patents, copyrights, trademarks and trade secrets in the Software are not
transferred to Licensee.
Use by a Third Party
Article 2
Licensee may not use, copy, modify, transfer or allow any third party, whether free of charge or not, to
use, copy or modify the Software, except as expressly provided for in this Agreement.
Article 3
Licensee may make a single copy of the Software in whole or in part solely for back-up purpose.
Restrictions on Copying the Software
Article 4
Licensee may only use the Software on a single computer at a single location.
Computer
Reverse Engineering, Decompiling or Disassembly
Article 5
Licensee may not reverse engineer, decompile, or disassemble the Software, except to the extent
either of them is permitted under law or regulation of the country where Licensee resides. Matsushita,
or its distributors or dealers will not be responsible for any defects in the Software or damage to
Licensee caused by Licensee’s reverse engineering, decompiling, or disassembly of the Software.
Limitation of Liability
Article 6
The Software is provided “AS-IS” without warranty of any kind, either expressed or implied, including,
but not limited to, warranties of non-infringement, merchantability and/or fitness for a particular
purpose. Further, Matsushita does not warrant that the operation of the Software will be uninterrupted
or error free. Matsushita or any of its distributors or dealers will not be liable for any damage suffered by
Licensee arising from or in connection with Licensee’s use of the Software.
Export Control
Article 7
Licensee agrees not to export or re-export to any country the Software in any form without the
appropriate export licenses under regulations of the country where Licensee resides, if necessary.
Termination of License
Article 8
The right granted to Licensee hereunder will be automatically terminated if Licensee violates any of the
terms and conditions of this Agreement. Upon such automatic termination, Licensee must destroy the
Software and related documentation together with all the copies thereof at Licensee’s own expense.
-6-
PV-GS55PP_Eng.book 7 ページ 2004年2月10日 火曜日 午前11時51分
Before opening the CD-ROM package, please read the following.
G.726 Audio Decoder End User License Agreement
YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. THIS IS A
LEGAL DOCUMENT WHICH CONSTITUTES YOUR AGREEMENT AS END USER FOR THE USE
OF THE SOFTWARE IN THAT PACKAGE. BY INSTALLING THIS SOFTWARE, YOU INDICATE
YOUR ACCEPTANCE OF THIS LIMITED USE SOFTWARE LICENSE.
IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE DISK
PACKAGE AND THE ACCOMPANYING ITEMS WITH YOUR SALES RECEIPT TO YOUR VENDOR.
L I M I T E D U S E S O F T W A R E L I C E N S E
You, the Licensee, are granted a non-exclusive software license to use the Software and related
documentation supplied herein. The terms of this license are as follows:
1) You may use the Software on a single computer at a single location.
2) As you, the Licensee, own the physical media on which the Software is recorded, the Licensor of
the Software retains title and ownership thereof, regardless of the form or media in or on which the
original and other copies may exist. This License is not a sale of the original Software or any copy
thereof.
3) You are required to protect the copyright of the Software. You may NOT distribute or otherwise
make the Software or documentation available to any third party without the prior written consent of
the Licensor. You may be held legally responsible for any copyright infringement that is caused or
encouraged by your failure to abide by the terms of this License.
4) You may NOT modify or alter the Software. Any portion of the Software that is merged into or used
in conjunction with other software will continue to be the property of the Licensor and will be subject
to the terms of this License.
5) You are permitted to copy the Software for exclusive use as your working copy. Any such copy
must contain the same copyright notice and proprietary marking as the original Software.
6) You may not transfer or assign the Software or this License to any other person without the prior
written consent of the Licensor. Any authorized transferee of the Software shall be bound by the
same terms and conditions of this License and, in such case your license is automatically
terminated. In no event may you transfer, assign, rent, sell, or otherwise dispose of the Software on
a temporary or permanent basis except as expressly provided herein.
7) This License is effective until terminated. This License will terminate automatically without notice
from the Licensor if you fail to comply with any provision of this Agreement. Upon termination you
will destroy the Software together with all copies and modifications in any form.
8) The Software has been tested and the documentation has been reviewed. However, THE
LICENSOR MAKES NO WARRANTY OR REPRESENTATION INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, ALL OF WHICH ARE
EXCLUDED. Some states do not allow exclusion of implied warranties so the above disclaimer
may not apply to you.
9) The Licensor will not be liable or in any way responsible for any incidental or consequential
economic or property damage in connection with the Software or its documentation. Some states
do not allow the exclusion of incidental or consequential damages so the above exclusion may not
apply to you.
10) (Notice to U.S. Government End Users) The Software and Documentation are “Commercial Items”,
as that term is defined at 48 C.F.R. 2.101, consisting of “Commercial Computer Software” and
“Commercial Computer Software Documentation”, as such terms are used in 48 C.F.R. 12.212 or
48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7202-1
through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer
Software Documentation are being licensed to U.S. Government end users (A) only as Commercial
Items and (B) with only those rights as are granted to all other end users pursuant to the terms and
conditions herein.
-7-
PV-GS55PP_Eng.book 8 ページ 2004年2月10日 火曜日 午前11時51分
Contents
B e f o r e U s e
P l a y b a c k M o d e
Playing Back a Tape ..................................... 37
Finding a Scene You Want to Play Back....... 37
Slow Motion Playback ................................... 38
Still Playback/Still Advance Playback............ 38
Index Search Functions................................. 39
Playback Zoom Function............................... 39
Playback Digital Effect Functions .................. 40
Playing Back a Card...................................... 40
Slide Show .................................................... 41
Creating a Title .............................................. 42
Adding a Title ................................................ 42
Writing Printing Data on a Card..................... 43
Protecting the Files on a Card....................... 43
Deleting the Files Recorded on a Card ......... 43
Formatting a Card ......................................... 44
Enlarging a Movie Picture Size ..................... 44
Playing Back on Your TV .............................. 45
E d i
t
i n g M o d e
Recording from a Tape onto a Card.............. 46
Recording Pictures from a Card onto a
Tape............................................................ 46
Audio Dubbing............................................... 46
Copying on an S-VHS (or a VHS)
Cassette...................................................... 47
Recording the Contents of Other
Equipment................................................... 48
Using the DV Cable for Recording ................ 48
W i
t h a P C
Using the Software with a Computer............. 49
Using USB Driver .......................................... 49
Using as a Web Camera ............................... 51
Using the DV STUDIO 3.1E-SE .................... 53
Using the G.726 Audio Decoder.................... 54
Using the ArcSoft Software ........................... 55
To disconnect USB cable safely .................... 57
If you no longer need software or driver
(Uninstall).................................................... 58
Notes ............................................................. 58
Quick Guide................................................... 10
Standard Accessories.................................... 12
Controls and Components............................. 12
The Remote Controller .................................. 15
Power Supply ................................................ 16
Charging Time and Available Recording
Time ............................................................ 16
The One-touch Free Style Grip Belt .............. 17
Attaching the Lens Cap ................................. 17
Attaching the Shoulder Strap......................... 17
Inserting a Cassette....................................... 18
Using a Memory Card.................................... 18
Turning on the Palmcorder ............................ 19
Selecting Modes ............................................ 19
Using the Viewfinder/LCD Monitor ................ 19
Using the Menu Screen ................................. 20
List of Menus ................................................. 21
Setting Date and Time................................... 24
Internal Lithium Battery Recharge ................. 24
LP Mode ........................................................ 24
Audio Recording Mode .................................. 24
R e c o r d i n g M o d e
About Recording............................................ 25
Recording on a Tape ..................................... 25
Recording a Still Picture on a Card
(Photoshot) ................................................. 26
Recording a Moving Picture on a Card
(MPEG4) ..................................................... 27
Quick Start..................................................... 28
Self-timer Recording...................................... 28
Zoom In/Out Functions .................................. 28
Digital Zoom Function.................................... 29
Image Stabilizer Function .............................. 29
Fade In/Out Functions ................................... 30
Backlight Compensation Function ................. 30
MagicPix Functions ....................................... 30
Soft Skin Function ......................................... 31
Wind Noise Reduction Function .................... 31
Cinema Function ........................................... 31
Recording in Special Situations..................... 32
Recording in Natural Colors .......................... 32
Adjusting White Balance Manually ................ 33
Manual Shutter Speed Adjustment................ 34
Manual Iris Adjustment .................................. 34
Manual Focus Adjustment ............................. 34
Digital Effect Functions.................................. 35
-8-