Copyright
Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as
ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the
accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corporation of the
United States in the United States and other countries.
Intel is a registered trademark of the Intel Corporation of the United States.
Celeron is a trademark of the Intel Corporation of the United States.
NeoMagic MagicMedia 256AV and NeoMagic MagicMedia 256AV+AC97 Driver (WDM) are trademarks of
NeoMagic™ Corporation.
ATI Mobility is a registered trademark of ATI Technologies Inc.
Puma Technology, Intellisync is a trademark of Puma Technology Corporation of the United States.
Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States.
K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation.
Magic Packet is a registered trademark of Advanced Micro Devices, Inc.
Other product names are trademarks or registered trademarks of their respective companies.
Other products are copyrighted by their companies.
Copyright© 1981-1999 Microsoft Corporation, All rights reserved.
Copyright© 1999 Phoenix Technologies, Ltd., All rights reserved.
All other products are trademarks or registered trademarks of their respective companies.
Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver
User’s Guide, copyright by LCS/Telegraphics in 1996.
© Copyright 1999 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or
translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmit-
ted in any electronic form without the written consent of Fujitsu Limited.
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name : FPCA
Address
: Fujitsu PC (Asia) Pte Ltd
200 Pandan Loop
#05-03, Pantech 21
The Computer Centre
Singapore 128388
Telephone : 65-776 0688
Declares that product: Model
: LifeBook E6550
Complies with Part 15
of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference
received, including interference that may cause undesired operation.
Bis Content
1
2/2/00, 15:54
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions carefully. Save these instructions for future reference.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water.
5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious
damage to the product.
6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable
operation of the product and to protect it from overheating, these openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or heat register, or in a built-
in installation unless proper ventilation is provided.
7. This product should be operated from the type of power indicated on the marking label. If you are not
sure of the type of power available, consult your dealer or local power company.
8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This
will only plug into a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the purpose
of the grounding-type plug.
9. Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on
the cord.
10. If an extension cord is used with this product, make sure that the total ampere rating of the equipment
plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure
that the total rating of all products plugged into the wall outlet does not exceed 15 amperes.
11. Never push objects of any kind into this product through cabinet slots as they may touch dangerous
voltage points that could result in a fire or electric shock. Never spill liquid of any kind on the product.
12. Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b.
c.
d.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions are followed. Adjust
only those controls that are covered by the operating instructions since improper adjustment of
other controls may result in damage and will often require extensive work by a qualified tech-
nician to restore the product to normal condition.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a need for service.
e.
f.
14. CAUTION. When replacing the battery, be sure to install it with the polarities in the correct posi-
tion. There is a danger of explosion if the battery is replaced with an incorrect type or is mis-
treated. Do not recharge, disassemble or dispose of in fire. Replace only with the same or equiva-
lent type recommeded by the manufacturer. Dispose of the used battery according to the manu-
facturer’s instructions.
15. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It
should be a detachable type: UL listed/CSA certified, BS1363,ASTA,SS145 certified, rated 10A 250V
minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).
Bis Content
2
2/2/00, 15:54
NOTATION IN THIS DOCUMENT
Warnings
This manual uses a variety of icons as visual marks so that you can use this computer safely and
correctly and avoid damage and danger to yourself and to others. These icons and their mean-
ings are as follows. Please learn these icons before reading this manual. Learning these icons
will be useful for understanding this manual.
Icon
WARNING
CAUTION
Meaning
Incorrect handling or ignoring this warning can cause a dangerous
situation that could result in death or severe injury.
Incorrect handling or ignoring this warning can cause a dangerous
situation that could result in moderate or minor injury or could result in
equipment damage.
The symbols below are used together with the icons above to indicate what type of danger or
damage is involved.
symbols
Meaning
The symbol indicates a w arning or caution. The symbol indicates the
concrete nature of the warning. (The example on the left is a caution for
electric shock.)
The circle and slash indicates prohibited behavior. The symbol inside
the circle indicates the concrete nature of the prohibition. (The example
on the left indicates that disassembly is prohibited.)
The
indicates instructions that must be followed. The symbol inside
indicates the concrete nature of those instructions. (The example on the
left tells you to unplug the power plug from the socket.)
Key notation and operation methods
Explanations of key operations do not show all the characters on the keyboard. Instead they
indicate just the keys necessary to the explanation as follows.
Examples: [Ctrl] key, [Enter] key, [ → ] key
When multiple keys are to be pressed at the same time, this is indicated by connecting them with
[+].
Examples: [Ctrl] + [F3] keys; [Shift] + [ ↑ ] key
Screen examples
The screens shown in this manual are examples. Please understand that the file names and
screens you use may be different.
Bis Content
3
2/2/00, 15:54
Notation in text
Here is what symbols in text mean.
Symbol
Critical Points
Column
→
Meaning
Critical Point Indicates a point necessary for correctly operating the
hardware or software.
Column Gives the meaning and brief explanation of a term.
Indicates the page to see elsewhere in this manual.
Command input (key input)
Within the text of this manual, command input (giving commands to the computer by pressing
keys) is indicated as follows.
Example:
dir
c:
↑
In the position indicated in the example above by the ↑, the space left between the characters
indicates that a space needs to be left in the entry by pressing the space bar (the long key with
nothing written on it at the center of the front of the keyboard). Commands are written in this
manual as lowercase latin letters, but uppercase letters may be used.
Product names
The following product names are abbreviated as follows in this manual.
“Microsoft® Windows® 98 operating system” is written as “Windows 98”.
“Microsoft® MS-DOS® operating system Version 6.2/V” is written as “MS-DOS”.
“Microsoft® Windows® operating system Version 3.1” is written as “Windows 3.1”.
“Microsoft® Windows NT ® Workstation operating system Version 4.0” is written as
“Windows NT 4.0”.
“Microsoft® Windows NT® Workstation operating system Version 3.51” is written as
“Windows NT 3.51”.
“Windows NT 4.0” and “Windows NT 3.51” are both written as Windows NT.
“LifeBook” is written as “this computer” or “the computer main unit”.
Bis Content
4
2/2/00, 15:54
Configuration of this Manual
SECTION 1
This section explains basic operations and basic items for using this computer, including the
names of the parts and their functions, flat point operation methods, floppy disk unit handing, and
battery operation.
SECTION 2
This section explains installation of options for this computer.
SECTION 3
This section explains the BIOS setup program, which is necessary for setting the
date and time and power conservation mode. This section also explains how to
set the password for protecting data in this computer.
SECTION 4
This section explains what to do when trouble occurs with this computer and when messages are
displayed. Read this section as the necessity arises.
I
1
N
O
T
C
E
S
I
2
N
O
T
C
E
S
I
3
N
O
T
C
E
S
I
4
N
O
T
C
E
S
Bis Content
5
2/2/00, 15:54
CONTENTS
SECTION 1
1. Names of the Parts and their Functions .............................2
Front .................................................................................................... 2
Left Side/Right Side ............................................................................. 4
Rear/Bottom ........................................................................................ 6
Status Indicator LCD ........................................................................... 8
2. Keyboard ..............................................................................10
Keyboard ........................................................................................... 10
Numeric Keypad Mode ...................................................................... 10
Names of the Main Keys and their Functions .................................... 11
3. Turning on the Power ..........................................................13
Turning on the power ......................................................................... 13
4. Turning off the Power ..........................................................15
Turning off the Power ......................................................................... 15
What Is the Suspend/Resume Function? .......................................... 16
Precautions for Suspending .............................................................. 16
5. Suspend/Resume Function ................................................16
Suspending ....................................................................................... 17
Resuming .......................................................................................... 19
6. Battery ..................................................................................20
Battery Charging ............................................................................... 20
Battery Operation .............................................................................. 21
Checking the Remaining Battery Charge .......................................... 22
Low Battery State .............................................................................. 23
Replacing the Battery Pack ............................................................... 24
Precautions for Battery Pack ............................................................. 26
7. Multi-bay Unit .......................................................................27
Mounting a multi-bay unit .................................................................. 27
Removing a multi-bay unit ................................................................. 28
Precautions on handling or using the multi-bay unit .......................... 29
Loading/Ejecting a Floppy Disk ......................................................... 30
Loading/Ejecting an LS-120 disk ....................................................... 31
Loading/Ejecting disks ....................................................................... 32
8. Built-in hard disk drive........................................................34
Replacing the built-in hard disk drive ................................................. 34
9. Built-in FAX modem ............................................................36
Connection ........................................................................................ 36
Modem Warnings .............................................................................. 37
Bis Content
6
2/2/00, 15:54
SECTION 1
SECTION 2
10. One-touch Panel ..................................................................38
1. Options .................................................................................40
Options .............................................................................................. 40
2. PC Cards ..............................................................................42
Precautions for PC Cards .................................................................. 42
Installing PC Cards ............................................................................ 43
Removing PC Cards .......................................................................... 44
3. Expansion RAM Modules ...................................................46
Installing an Expansion RAM Module ................................................ 46
Removing an Expansion RAM Module .............................................. 48
4. Mouse .....................................................................................50
Connecting the Mouse ...................................................................... 50
Using the Mouse ............................................................................... 50
5. Numeric Keypad ....................................................................52
Connecting a Numeric Keypad .......................................................... 52
6. Floppy Disk Unit ....................................................................53
Installing a Floppy Disk Unit .............................................................. 53
Precautions for Floppy Disk Unit ....................................................... 54
Removing a Floppy Disk Unit ............................................................ 55
Loading/Ejecting a Floppy Disk ......................................................... 56
Loading .............................................................................................. 56
Ejecting .............................................................................................. 56
7. Printer .....................................................................................57
Connecting a Printer .......................................................................... 57
8. CRT Monitor ...........................................................................59
Connecting an External CRT Monitor ................................................ 59
9. Wireless Mouse .....................................................................61
Precautions on safety ........................................................................ 61
Preparation and Preliminary knowledge ............................................ 63
Setup of personal computer and wireless mouse ............................. 64
Replacing batteries ............................................................................ 65
For good maintenance ....................................................................... 66
Caution .............................................................................................. 67
Troubleshooting ................................................................................. 67
Specifications .................................................................................... 68
Bis Content
7
2/2/00, 15:54
SECTION 3
SECTION 4
1. BIOS setup .............................................................................70
2. POST Diagnostic Screen ......................................................95
1. When This Happens ..............................................................98
Bis Content
8
2/2/00, 15:54