logo资料库

SM-R810_Common-拆装指导(三星 Watch（SM-R810）).pdf

发布时间：2022-03-17 发布人：admin 分类：说明书 资料大小：1.24M 资料格式：pdf 举报 版权申诉
第1页 / 共8页
第2页 / 共8页
第3页 / 共8页
第4页 / 共8页
第5页 / 共8页
第6页 / 共8页
第7页 / 共8页
第8页 / 共8页
资料共8页，全文预览结束
    7. Level 2 Repair 7-1. Components on the Rear Case .
    7. Level 2 Repair 7-2. Pre-requisite Tweezers / Disass'y Stick / Screw Driver Anti-static Gloves Anti-static Mat 1.6pi Y type screw driver .
    7. Level 2 Repair 7-3. Disassembly 1 Disassemble Band 2 Loosen the 4 Points screw ※ Caution Be care of scratch. 3 1) Disassemble Rear ※ Caution Be care of scratch and Rear damage. 4 It dismantles UB(Display) /HALL IC connector UB Hall IC ※ Caution Be care of rear sealing ※ Caution Be care of PBA damage. .
    7. Level 2 Repair 5 Disassemble Bracket (with tweezers) 6 .Detach 2 KEY FPCB from Bracket. .Loosen 1 point screw ※ Caution Be care of Bracket and UB(Display) damage. ※ Caution Be care of PBA damage 8 Disassemble MOTOR / HALL IC FPCB 7 Separate PBA and Bracket ※ Caution Be care of PBA damage ※ Caution Be care of BATTERY/ Motor/ Hall IC FPCB .
    7. Level 2 Repair 9 Loosen the speaker screws 10 Disassemble Speaker SUS(with tweezers) ※ Caution Be care of rear damage. ※ Caution Be care of speaker damage 11 Separate Speaker / SPK SUS / Hrm Sensor ※ Caution Be care of speaker and Hrm Sensor .
    7. Level 2 Repair 7-4. Assembly 1 Assemble Hall IC FBCB / MOTOR 2 1) Assemble PBA and Bracket 2) screw 1 point 3) attach 2 key FPCB on Bracket ※ Caution Be care of Motor and Hall IC FPCB damage Assemble Bracket on FRONT - UB connector passes through bracket hole 3 ※ Caution Be care of PBA damage and tilt 4 Assemble UB Connector / HALL IC ※ Caution Be care of UB connector FPCB damage and tilt ※ Caution Be care of UB connector damage .
    7. Level 2 Repair 5 Assemble Speaker (First put the “A” into SPK hole and push the down side) 6 Assemble SPK SUS and 2-Screw ※ Caution Be care of speaker sealing damage ※ Caution Be care of scratch and Rear damage. 7 Assemble Front and Rear - Match ‘A-A’ and ‘B-B’ 8 Connect Hall IC connector A B A B ※ Caution Be care of scratch and Rear damage ※ Caution Be care of PBA damage .
    7. Level 2 Repair 9 Screw 4 Points * Torque Value : 0.8kgf 10 Assemble Band and Do the final test ※ Caution Be care of scratch and Rear damage. ※ Caution 1) Be care of scratch and damage 2) After the reassembly, waterproof test is necessary Refer to the separate manual for water resistance test .
    分享到：
    赞 收藏

    相关推荐

    最新资料