Topic –Motor Application Note
基于 MAXWELL 2D 的永磁电机研究:
以丰田公司 2004 年推出的普锐斯混合动力
车用内置永磁驱动电机为例进行阐述
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
分析内容概述 :
一般步骤
创建 3D模型
改变 3D模型的尺寸
指定电机所用材料的属性
指定主 /从边界条件
稳态分析
瞬态分析
齿槽转矩求解
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
入门步骤
启动 Maxwell
1. 启动 Maxwell, 单击 Microsoft 的开始 按钮 , 选择 Programs >Ansoft >Maxwell 12.
设置工具栏选项
设置工具栏选项 :
注: 为与本例中的所列步骤保持一致,检查工具栏选项是否按如下设置:
Tools > Options > Maxwell2D Options
选中菜单栏 Tools > Options > Maxwell 2D Options
1. Maxwell 选项窗口:
1. 左键单击 General Options 对话框
Use Wizards for data entry when creating new boundaries
; Checked
Duplicate boundaries with geometry
: ; Checked
:
2. 左键单击 OK 键
2. 选中菜单项 Tools > Options > Modeler Options .
3. 3D 模型选项窗口:
1. 左键单击 Operation 对话框
Automatically cover closed polylines
: ; Checked
2. 左键单击 Drawing 对话框
Edit property of new primitives :
Edit property of new primitives : ; Checked
3. 左键单击 OK 键
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
创建 个新 程
创建一个新工程
创建一个新工程 :
1. 在Maxwell 窗口中 , 左键单击 工具栏 图标, 或选中菜单栏 File > New.
2. 右键单击工程名 , 然后选择弹出的快捷菜单栏 rename 项, 改变工程名
为 Prius
3. 选中菜单栏 Project > Insert Maxwell Design , 或单击图标
4. 右键单击 Maxwelldesign1 ,然后选择弹出的快捷菜单栏 Rename 项,
重命名为 1_Whole_Motor
设置模型单位
选中菜单栏 3D Modeler > Units. 选择单位 : mm (millimeters)
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
创建 2D模型
电机所有主要部件均可由 Maxwell 中的User Defined Primitives 来生成。
创建电机的定子 :
使用一个用户预先定义的模型( UDP )来创建定子。
选中菜单栏 Draw > User Defined Primitive > Syslib > Rmxprt > SlotCore
采用下表所列数据来创建电机的定子
)来创建定子
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
创建 2D 模型 (续)
右键单击在绘图窗口中刚刚创建的物体并重命名为 Stator
注: 稍后再指定材料属性
创建电机的转子
使用一个用户预先定义的模型来创建转子
选中菜单栏 Draw > User Defined Primitive > Syslib > Rmxprt > IPMCore
采用下表所给定的数据来创建转子
Ansoft Maxwell Field Simulator
Topic –Motor Application Note
创建 2D模型 (续)
右键单击在绘图窗口中刚刚创建的物体并重命名为 Rotor。
创建电机永磁体
修改UDP 参数,生成永磁体。可通过计算 UDPs 来生成不同的拓扑结构。
选中转子,并使用 Ctrl+C, Ctrl+V 等复制、粘贴命令,生成一个新的物体 Rotor1
。
Ansoft Maxwell Field Simulator