Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or
omissions that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any
kind, either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
ASRock Website: http://www.asrock.com
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
Published October 2004
Copyright©2004 ASRock INC. All rights reserved.
ASRock 775i65PE Motherboard
11111
Motherboard L
Motherboard L
ayout
ayout
Motherboard Layout
ayout
Motherboard L
Motherboard L
ayout
1
2
3
4
5
6
7
8
9
10
11
12
13
14
PS2_USB_PWR1 Jumper
ATX 12V Connector (ATX12V1)
775-Pin CPU Socket
North Bridge Controller
2 x 184-pin DDR DIMM Slots
(Dual Channel A: DDR1, DDR3; Blue)
2 x 184-pin DDR DIMM Slots
(Dual Channel B: DDR2, DDR4; Black)
Secondary IDE Connector (IDE2, Black)
Primary IDE Connector (IDE1, Blue)
South Bridge Controller
Primary Serial ATA Connector (SATA1)
Secondary Serial ATA Connector (SATA2)
Clear CMOS Jumper (CLRCMOS0)
FSB Select Jumper (FSB_SEL1)
Chassis Fan Connector (CHA_FAN1)
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
System Panel Header (PANEL1)
Chassis Speaker Header (SPEAKER 1)
USB 2.0 Header (USB67, Blue)
Infrared Module Header (IR1)
USB 2.0 Header (USB45, Blue)
Floppy Connector (FLOPPY1)
Game Connector (GAME1)
Internal Audio Connector: CD1 (Black)
Front Panel Audio Header (AUDIO1)
JR1 / JL1 Jumpers
PCI Slots (PCI1- 5)
BIOS FWH Chip
AGP Slot (1.5V_AGP1)
ATX Power Connector (ATXPWR1)
CPU Fan Connector (CPU_FAN1)
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
22222
ASRock 775i65PE Motherboard
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
ASRock 8CH I/O
1
2
3
4
5
6
*7
Parallel Port
RJ-45 Port
Side Speaker (Gray)
Rear Speaker (Black)
Central / Bass (Orange)
Line In (Light Blue)
Front Speaker (Lime)
8 Microphone (Pink)
9
USB 2.0 Ports (USB01)
10 USB 2.0 Ports (USB23)
11
12
13
Serial Port: COM1
PS/2 Keyboard Port (Purple)
PS/2 Mouse Port (Green)
* If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See
the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection
Audio Output Channels Front Speaker Rear Speaker
Central / Bass
Side Speaker
(No. 7)
(No. 4)
(No. 5)
(No. 3)
2
4
6
8
V
V
V
V
--
V
V
V
--
--
V
V
--
--
--
V
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
ASRock 775i65PE Motherboard
33333
1. Introduction
1. Introduction
1. Introduction
1. Introduction
1. Introduction
Thank you for purchasing ASRock 775i65PE motherboard, a reliable motherboard
produced under ASRock’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock’s commitment to quality and
endurance.
This Quick Installation Guide contains introduction of the motherboard and step-by-
step installation guide. More detailed information of the motherboard can be found in
the user manual presented in the Support CD.
Because the motherboard specifications and the BIOS software might
be updated, the content of this manual will be subject to change
without notice. In case any modifications of this manual occur, the
updated version will be available on ASRock website without further
notice. You may find the latest memory and CPU support lists on
ASRock website as well.
ASRock website http://www.asrock.com
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
1.1 Package Contents
ASRock 775i65PE Motherboard
(ATX Form Factor: 12.0-in x 9.0-in, 30.5 cm x 22.9 cm)
ASRock 775i65PE Quick Installation Guide
ASRock 775i65PE Support CD
(including LGA 775 CPU Installation Live Demo)
One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable
One Ribbon Cable for a 3.5-in Floppy Drive
One Serial ATA (SATA) Data Cable
One Serial ATA (SATA) HDD Power Cable (Optional)
One ASRock 8CH I/O Shield
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
44444
ASRock 775i65PE Motherboard
1.2 Specifications
1.2 Specifications
1.2 Specifications
1.2 Specifications
1.2 Specifications
Platform:
CPU:
Chipsets:
ATX Form Factor: 12.0-in x 9.0-in, 30.5 cm x 22.9 cm
775-Pin Socket
Supporting Intel® Pentium® 4 / Celeron® processor (in 775-land
LGA package)
North Bridge:
Intel® 865PE chipset, FSB @ 800 / 533MHz,
Max. 1066 MHz at overclocking mode (see CAUTION 1),
supports Hyper-Threading Technology (see CAUTION 2)
South Bridge:
Intel® ICH5, supports SATA 1.5Gb/s
Memory:
4 DDR DIMM Slots: DDR1, DDR2, DDR3, and DDR4
4 DDR DIMM Slots Supports PC3200 (DDR400) / PC2700
(DDR333) / PC2100 (DDR266), Max. 4GB,
(see CAUTION 3)
IDE:
Serial ATA:
Dual Channel Memory Technology support (see CAUTION 4)
IDE1: ATA 100 / Ultra DMA Mode 5
IDE2: ATA 100 / Ultra DMA Mode 5
Supports up to 4 IDE devices
Supports up to 2 SATA devices at 1.5Gb/s data transfer rate
(Not Support “RAID and “Hot Plug” functions)
Supports up to 2 floppy disk drives
7.1 channels AC’97 Audio
Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN
Floppy Port:
Audio:
PCI LAN:
Hardware Monitor: CPU temperature sensing,
PCI slots:
AGP slot:
USB 2.0:
ASRock 8CH I/O:
Chassis temperature sensing,
CPU overheat shutdown to protect CPU life
(ASRock U-COP)(see CAUTION 5),
CPU fan tachometer,
Chassis fan tachometer,
Voltage monitoring: +12V, +5V, +3.3V, Vcore
5 PCI slots with PCI Specification 2.3
1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 6)
8 USB 2.0 ports:
includes 4 default USB 2.0 ports on the rear panel,
plus two headers to support 4 additional USB 2.0 ports
(see CAUTION 7)
1 PS/2 Mouse Port, 1 PS/2 Keyboard Port
1 Serial Port: COM1
1 Parallel Port (ECP/EPP Support)
4 Ready-to-Use USB 2.0 Ports
1 RJ-45 Port
ASRock 775i65PE Motherboard
55555
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
Audio Jack: Side Speaker / Rear Speaker / Central/Bass /
Line In / Front Speaker / Microphone
(see CAUTION 8)
AMI legal BIOS,
Supports “Plug and Play”,
ACPI 1.1 compliance wake up events,
Supports jumperfree,
CPU frequency stepless control
(only for advanced users’ reference, see CAUTION 9)
Microsoft® Windows® 98 SE / ME / 2000 / XP compliant
BIOS:
OS:
CAUTION!
1. To support FSB1066, please use DDR400 DIMMs (Double Data Rate 400
MHz). Before installing FSB1066 CPU, please make sure that you have
adjusted the jumpers correctly. The default setting of FSB1 is shorting
pin1 and pin2. However, if you want to support FSB1066 CPU, please
adjust your FSB1 jumper setting, and short pin2 and pin3.
2. About the setting of “Hyper Threading Technology”, please check page 25
in the support CD.
3. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.
CPU FSB Frequency
Memory Support Frequency
800
533
1066
DDR266, DDR320*, DDR400
DDR266, DDR333
DDR400*
* When you use an FSB800-CPU on this motherboard, it will run at
DDR320 if you adopt a DDR333 memory module.
4. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 10 for proper installation.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
6. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!
It may cause permanent damage!
7. Power Management for USB 2.0 works fine under Microsoft® Windows® XP
SP1 / 2000 SP4. It may not work properly under Microsoft® Windows® 98/
ME.
8. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 3 for
proper connection.
ASRock 775i65PE Motherboard
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
66666
9. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
2.2.2.2.2. Installation
Installation
Installation
Installation
Installation
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Pre-installation Precautions
Take note of the following precautions before you install mother-
board components or change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any
component. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
2. To avoid damaging the motherboard components due to static
electricity, NEVER place your motherboard directly on the carpet
or the like. Also remember to use a grounded wrist strap or touch
a safety grounded object before you handle components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded
antstatic pad or in the bag that comes with the component.
5. When placing screws into the screw holes to secure the
motherboard to the chassis, please do not over-tighten the
screws! Doing so may damage the motherboard.
CPU Installation
CPU Installation
2.12.12.12.12.1 CPU Installation
CPU Installation
CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
775-Pin Socket Overview
h
h
h
h
h
s
s
s
s
s
i
i
i
i
i
l
l
l
l
l
g
g
g
g
g
n
n
n
n
n
E
E
E
E
E
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
ASRock 775i65PE Motherboard
77777
Step 1. Open the socket:
Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2. Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Step 2. Insert the 775-LAND CPU:
Step 2-1. Hold the CPU by the edges where are
marked with black lines.
b
l
a
c
k
l
i
n
e
b
l
a
c
k
l
i
n
e
Step 2-2. Orient the CPU with IHS (Integrated
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
Pin1
orientation
key notch
orientation
key notch
Pin1
alignment key
alignment key
775-LAND CPU
775-Pin Socket
For proper inserting, please ensure to match the two orientation key
notches of the CPU with the two alignment keys of the socket.
E
E
E
E
E
n
n
n
n
n
g
g
g
g
g
l
l
l
l
l
i
i
i
i
i
s
s
s
s
s
h
h
h
h
h
Step 2-3. Carefully place the CPU into the socket
by using a purely vertical motion.
Step 2-4. Verify that the CPU is within the socket
and properly mated to the orient keys.
Step 3. Remove PnP Cap (Pick and Place Cap):
Use your left hand index finger and thumb to
support the load plate edge, engage PnP cap
with right hand thumb and peel the cap from the
socket while pressing on center of PnP cap to
assist in removal.
88888
ASRock 775i65PE Motherboard