logo资料库

二氧化硫传感器 SO2 SF-2000-S.pdf

第1页 / 共1页
资料共1页,全文预览结束
SPECIFICATION SHEET FOR SO2 SENSOR TYPE SO2/SF-2000-S
深 圳 市 逸 云 天 电 子 有 限 公 司 SPECIFICATION SHEET FOR SO2 SENSOR TYPE SO2/SF-2000-S PERFORMANCE CHARACTERISTICS 0 – 2’000 ppm 5’000 ppm To remove H2S and HCl from flue strean 2 years in air 100 ± 20 nA/ppm 1 ppm - 20 °C to 45 °C Atmospheric ± 10% No data < 45 sec 15 % to 90 % R.H. non-condensing -2 to +2 ppm 5 ppm < 2 % signal loss/month 10 Ohm Not required < 2 % of signal Linear Cross-Sensitivity (%) ~ 0,3 0 0 ~ -125 ~ 0,2 ~ 0,6 0 Nominal Range Maximum Overload Inboard Filter Expected Operation Life Output Signal Resolution Temperature Range Pressure Range Pressure Coefficient T90 Response Time Relative Humidity Range Typical Baseline Range (pure air, 20°C) Maximum Zero Shift (+20°C to +40°C) Long Term Output Drift Recommended Load Resistor Bias Voltage Repeatability Output Linearity CROSS-SENSITIVITY DATA Interfering Gas CO H2S NO NO2 H2 Ehthylene HCl Performance data conditions: 20 °C, 50% RH and 1013 mbar APPLICATIONS Stack/ Flue Gas Monitoring Emission Monitoring PHYSICAL CHARACTERISTICS Weight Position Sensitivity Storage Life Recommended Storage Temperature Warranty Period ~ 27 g None Six months in container 5 °C – 20 °C 12 months from date of dispatch Slim-Size Outline Dimensions BOTTOM VIEW 60° Reference 34.4 m m SIDE VIEW 41 mm Sensing 60° Counter 30 mm 3 Mounting Holes 3.0 mm Equispaced on 34.4 mm PCD 4.5 mm Pin Projection 8 mm 3.5 mm 1 mm Pins on 34.4 mm PCD The data contained in this document is for guidance only. Membrapor AG accepts no liability for any consequential losses, injury or damage resulting from the use of this document or the information contained within it. The data is given for guidance only. Customers should test under their own conditions, to ensure that the sensors are suitable for their own requirements. REV.: 6/2004 Page 1 of 1 地址:深圳市南山区南头路嘉南美地 E 座 1305 室 电话:0755-86211867 86211857 主页:www.yiyuntian.net 联系人:崔 殿 传 真:0755-86211864 邮 箱:info@yiyuntian.net
分享到:
收藏