logo资料库

二氧化硫传感器 SO2 M-20.pdf

第1页 / 共1页
资料共1页,全文预览结束
SPECIFICATION SHEET FOR SO2 SENSOR TYPE SO2/M-20
深 圳 市 逸 云 天 电 子 有 限 公 司 SPECIFICATION SHEET FOR SO2 SENSOR TYPE SO2/M-20 PERFORMANCE CHARACTERISTICS 0 – 20 ppm 100 ppm 2 years in air 300 ± 80 nA/ppm 0,3 ppm - 20 °C to 50 °C Atmospheric ± 10% No data < 30 sec 15 % to 90 % R.H. non-condensing < 0,2 ppm N.D. < 2% signal loss/month 10 Ohm Not required < 2 % of signal Linear Reading < 1 ppm ND ND ~ -125 ppm < 1 ppm 0 ppm Nominal Range Maximum Overload Expected Operation Life Output Signal Resolution Temperature Range Pressure Range Pressure Coefficient T90 Response Time Relative Humidity Range Typical Baseline Range (pure air, 20°C) Maximum Zero Shift Long Term Output Drift Recommended Load Resistor Bias Voltage Repeatability Output Linearity CROSS-SENSITIVITY DATA Interfering Gas Concentration 100 ppm 10 ppm 100 ppm 100 ppm 100 ppm 100 ppm CO H2S NO NO2 H2 Ethylene Performance data conditions: 20 °C, 50% RH and 1013 mbar APPLICATIONS Safety and Environmental Control For Portable Gas Detectors PHYSICAL CHARACTERISTICS Weight Position Sensitivity Storage Life Recommended Storage Temperature Warranty Period ~ 5,6 g None Six months in container 5 °C – 20 °C 12 months from date of dispatch Miniature-Size Outline Dimensions BOTTOM VIEW Reference Sensing Counter 13.5 mm PCD 90° 18 mm 20 mm SIDE VIEW 5 mm Pin Projection 1.5 mm Pins on 13.5 mm PCD The data contained in this document is for guidance only. Membrapor AG accepts no liability for any consequential losses, injury or damage resulting from the use of this document or the information contained within it. The data is given for guidance only. Customers should test under their own conditions, to ensure that the sensors are suitable for their own requirements. REV.: 7/2005 Phone: +41 43 311 72 00 Fax : +41 43 311 72 01 Email: info@membrapor.ch www.membrapor.ch Page 1 of 1 MEMBRAPOR AG Rautistrasse 164 CH-8048 Zürich Switzerland
分享到:
收藏